Export limit exceeded: 414025 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414025 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-11414 | 1 Altium | 2 Enterprise Server, On-prem Enterprise Server | 2026-06-16 | 9.8 Critical |
| A hard-coded cryptographic key is used by Altium Enterprise Server to sign file download URLs in the Vault service. Because the key is identical across all installations, an unauthenticated network attacker who can reach the server can forge valid download signatures and retrieve files from the Vault storage area without any authentication, session, or credentials. A separate path traversal vulnerability in the same download endpoint allows the configured storage root to be escaped, enabling reads of arbitrary files on the server filesystem. Combined, these issues allow an unauthenticated attacker to obtain sensitive server configuration and key material, which can lead to full server compromise. The vulnerability can be chained with CVE-2026-9152 to enumerate and bulk-download stored content. Altium 365 cloud deployments are not impacted in practice, as file storage uses object storage rather than the local filesystem. | ||||
| CVE-2026-11419 | 1 Altium | 2 Enterprise Server, On-prem Enterprise Server | 2026-06-16 | 8.8 High |
| A path traversal vulnerability exists in the Altium Enterprise Server Vault Service UploadController due to improper validation of a user-controlled path component in image upload requests. An authenticated user can supply a crafted absolute path so that the configured storage root is discarded, allowing arbitrary files to be written to any location on the server filesystem writable by the service account. Because content-controlled files can be written to web-accessible directories, or used to overwrite application binaries or configuration files, this can be escalated to remote code execution, service takeover, or denial of service. Altium 365 cloud deployments are not affected, as the affected endpoint is not reachable and the cloud storage architecture mitigates the file-write primitive. | ||||
| CVE-2026-11420 | 1 Altium | 2 Enterprise Server, On-prem Enterprise Server | 2026-06-16 | 9.8 Critical |
| Two path traversal vulnerabilities in the Network Installation Service (NIS) of Altium Enterprise Server allow an unauthenticated network attacker to write arbitrary files to any writable location on the server filesystem and to read package archive files from the server. No authentication, session, or credentials are required. Because content-controlled files can be written to web-accessible directories, or used to overwrite application binaries or configuration files, exploitation can be escalated to remote code execution in the context of the service account, and can disclose deployment package contents. Altium 365 cloud deployments are not affected, as the Network Installation Service is not part of the cloud offering. | ||||
| CVE-2026-48775 | 2 Langchain, Langchain-ai | 3 Langgraph-checkpoint, Langgraph, Langgraph-checkpoint | 2026-06-16 | 6.8 Medium |
| LangGraph SQLite Checkpoint is an implementation of LangGraph CheckpointSaver that uses SQLite DB (both sync and async, via aiosqlite). In versions 4.1.0 and prior, the JsonPlusSerializer can reconstruct Python objects from JSON checkpoint payloads. Under conditions where someone could modify checkpoint bytes at rest in the backing store, the deserialization path could reconstruct objects beyond what the application expects, which could in turn result in code execution at checkpoint load time. This is a defense-in-depth issue. The affected behavior is reachable only when checkpoint bytes at rest in the backing store can be modified by an unauthorized party. In most deployments that prerequisite already implies a serious incident; the additional concern is turning "checkpoint-store write access" into code execution in the application runtime. This issue has been fixed in version 4.1.1. | ||||
| CVE-2026-0148 | 1 Google | 1 Android | 2026-06-16 | 8.8 High |
| In multiple functions of VideoRtpPayloadDecoderNode.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0154 | 1 Google | 1 Android | 2026-06-16 | 8.8 High |
| In Modem, there is a possible way to trigger a modem crash during a SIP REFER request due to memory corruption. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-53856 | 1 Openclaw | 1 Openclaw | 2026-06-16 | 5.5 Medium |
| OpenClaw 2026.4.23 before 2026.4.24 contains an insecure file permissions vulnerability in config recovery that restores OpenClaw.json with overly broad permissions. Local attackers on shared hosts can read sensitive configuration data by exploiting the recovery path to access the restored config file. | ||||
| CVE-2026-22998 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated | ||||
| CVE-2026-22999 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: do not free existing class in qfq_change_class() Fixes qfq_change_class() error case. cl->qdisc and cl should only be freed if a new class and qdisc were allocated, or we risk various UAF. | ||||
| CVE-2026-22991 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating. | ||||
| CVE-2026-22984 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in handle_auth_done() Perform an explicit bounds check on payload_len to avoid a possible out-of-bounds access in the callout. [ idryomov: changelog ] | ||||
| CVE-2026-23074 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF. | ||||
| CVE-2026-23171 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] | ||||
| CVE-2026-23209 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. | ||||
| CVE-2026-1767 | 2 Gnome, Redhat | 2 Localsearch, Enterprise Linux | 2026-06-16 | 5.6 Medium |
| A flaw was found in the GNOME localsearch (previously known as tracker-miners) MP3 Extractor `tracker-extract-mp3` component. A remote attacker could exploit this heap buffer overflow vulnerability by providing a specially crafted MP3 file containing malformed ID3 tags. This incorrect length calculation during the parsing of performer tags can lead to a read beyond the allocated buffer, potentially causing a Denial of Service (DoS) due to a crash or enabling information disclosure. | ||||
| CVE-2026-1766 | 2 Gnome, Redhat | 2 Localsearch, Enterprise Linux | 2026-06-16 | 5.6 Medium |
| A flaw was found in GNOME localsearch (previously known as tracker-miners) MP3 Extractor, specifically within the tracker-extract-mp3 component. This heap buffer overflow vulnerability occurs when processing specially crafted MP3 files containing malformed ID3v2.3 COMM (Comment) tags. An attacker could exploit this by providing a malicious MP3 file, leading to a denial of service (DoS), which causes an application crash, and potentially disclosing sensitive information from the heap memory. | ||||
| CVE-2026-41711 | 2 Broadcom, Spring | 2 Spring Data Commons, Spring Data Commons | 2026-06-16 | 5.9 Medium |
| Applications using Spring Data Commons may be vulnerable to a Denial of Service (DoS) attack leading to a StackOverflowException when parsing Sort parameters. Affected versions: Spring Data Commons 4.0.0 through 4.0.5; 3.5.0 through 3.5.11; 3.4.0 through 3.4.14; 3.3.0 through 3.3.16; 3.2.0 through 3.2.15; 3.1.0 through 3.1.14; 3.0.0 through 3.0.15; 2.7.0 through 2.7.19. | ||||
| CVE-2026-41721 | 2 Broadcom, Spring | 2 Spring Data Commons, Spring Data Commons | 2026-06-16 | 5.9 Medium |
| Spring Data Commons contains a vulnerability that can lead to a Denial of Service (DoS) condition if Spring Data Web Support is enabled in conjunction with a Controller method using @ProjectedPayload, when an attacker sends a specially crafted HTTP request that causes the application to allocate lots of memory. Affected versions: Spring Data Commons 4.0.0 through 4.0.5; 3.5.0 through 3.5.11; 3.4.0 through 3.4.14; 3.3.0 through 3.3.16; 3.2.0 through 3.2.15; 3.1.0 through 3.1.14; 3.0.0 through 3.0.15; 2.7.0 through 2.7.19. | ||||
| CVE-2026-23193 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation. | ||||
| CVE-2026-23001 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u | ||||