Description
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior.
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior.
Published:
2026-09-16
Score:
n/a
EPSS:
n/a
KEV:
No
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Wed, 16 Sep 2026 10:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer. This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing. Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior. | |
| Title | HID: wacom: validate report length in wacom_intuos_pro2_bt_irq | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-16T10:33:10.683Z
Reserved: 2026-09-11T19:38:34.780Z
Link: CVE-2026-89999
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-16T11:17:11.177
Modified: 2026-09-16T11:17:11.177
Link: CVE-2026-89999
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.