Description
In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated---
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated---
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Sat, 12 Sep 2026 00:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-825 | |
| References |
| |
| Metrics |
threat_severity
|
cvssV3_1
|
Fri, 11 Sep 2026 23:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor. priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop: /* Snapshot list, allow later requests */ list_replace_init(&net_todo_list, &list); __rtnl_unlock(); ... if (dev->priv_destructor) dev->priv_destructor(dev); /* slip_devs[i] = NULL */ if (dev->needs_free_netdev) free_netdev(dev); ... /* Free network device */ kobject_put(&dev->dev.kobj); So rtnl_lock() does not serialise slip_open() against the teardown at all. sl_sync() can load slip_devs[i] while the entry is still published and dereference it after netdev_run_todo() has run the destructor and released the device: CPU0 (slip_open) CPU1 (slip_close) unregister_netdev() rtnl_unlock() netdev_run_todo() __rtnl_unlock() rtnl_lock() sl_sync() dev = slip_devs[i] priv_destructor(dev) slip_devs[i] = NULL kobject_put(&dev->dev.kobj) /* dev is freed */ sl = netdev_priv(dev) if (sl->tty || sl->leased) /* use-after-free */ BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline] BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506 CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: sl_sync drivers/net/slip/slip.c:730 [inline] slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 tiocsetd drivers/tty/tty_io.c:2428 [inline] tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712 Allocated by task 6502: alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719 sl_alloc drivers/net/slip/slip.c:756 [inline] slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 Freed by task 6497: device_release+0xa2/0x240 drivers/base/core.c:2507 kobject_put+0x179/0x280 lib/kobject.c:729 netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509 slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906 tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456 tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614 tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782 tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860 Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed a different source of stale entries - a device left in slip_devs[] after slip_open() freed it on the registration error path - and does not address this race, which is why the report survives it. Drop the entry from ndo_uninit instead. unregister_netdevice() calls ndo_uninit under RTNL, before the device is queued to netdev_run_todo(), so an entry that sl_sync() can still see while holding RTNL belongs to a device that cannot be freed until RTNL is dropped. sl_free_netdev() stays only for the slip_open() error path, where register_netdevice() may have failed before ndo_init and ndo_uninit is then not called either. Both running for the same device is harmless: the ---truncated--- | |
| Title | slip: fix use-after-free in sl_sync() | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-11T19:42:54.846Z
Reserved: 2026-08-26T14:34:25.812Z
Link: CVE-2026-81001
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-11T20:19:08.160
Modified: 2026-09-11T20:19:08.160
Link: CVE-2026-81001
Redhat
OpenCVE Enrichment
No data.
Weaknesses