Export limit exceeded: 25069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix bootup splat with separate_gpu_drm modparam The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses drm_gem_obj.gpuva.list, which is not initialized when the drm driver does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam is set: [ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0 [ 9.523160] Mem abort info: [ 9.523161] ESR = 0x0000000096000006 [ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits [ 9.523165] SET = 0, FnV = 0 [ 9.523166] EA = 0, S1PTW = 0 [ 9.523167] FSC = 0x06: level 2 translation fault [ 9.523169] Data abort info: [ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000 [ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000 [ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP [ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT [ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024 [ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 9.592973] pc : lookup_vma+0x28/0xe0 [msm] [ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm] [ 9.763632] sp : ffff800082dab460 [ 9.763666] Call trace: [ 9.763668] lookup_vma+0x28/0xe0 [msm] (P) [ 9.763688] get_vma_locked+0x2c/0x128 [msm] [ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm] [ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm] [ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm] [ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper] [ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper] [ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib] [ 9.763782] drm_client_register+0x58/0x9c [drm] [ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib] [ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib] [ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm] [ 9.763830] msm_drm_init+0x1a8/0x22c [msm] [ 9.763848] msm_drm_bind+0x30/0x3c [msm] [ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4 [ 9.919283] __component_add+0xa4/0x170 [ 9.919286] component_add+0x14/0x20 [ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm] [ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm] [ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus] [ 9.919341] really_probe+0xbc/0x298 [ 9.919345] __driver_probe_device+0x78/0x12c [ 9.919348] driver_probe_device+0x40/0x160 [ 9.919350] __driver_attach+0x94/0x19c [ 9.919353] bus_for_each_dev+0x74/0xd4 [ 9.919355] driver_attach+0x24/0x30 [ 9.919358] bus_add_driver+0xe4/0x208 [ 9.919360] driver_register+0x60/0x128 [ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus] [ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20] [ 9.919370] do_one_initcall+0x6c/0x1b0 [ 9.919374] do_init_module+0x58/0x234 [ 9.919377] load_module+0x19cc/0x1bd4 [ 9.919380] init_module_from_file+0x84/0xc4 [ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc [ 9.919384] invoke_syscall+0x48/0x110 [ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8 [ 9.919393] do_el0_svc+0x20/0x2c [ 9.919396] el0_svc+0x34/0xf0 [ 9.919401] el0t_64_sync_handler+0xa0/0xe4 [ 9.919403] el0t_64_sync+0x198/0x19c [ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44) [ 9.919410] ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/pa ---truncated--- | ||||
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||
| CVE-2025-40143 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: dont report verifier bug for missing bpf_scc_visit on speculative path Syzbot generated a program that triggers a verifier_bug() call in maybe_exit_scc(). maybe_exit_scc() assumes that, when called for a state with insn_idx in some SCC, there should be an instance of struct bpf_scc_visit allocated for that SCC. Turns out the assumption does not hold for speculative execution paths. See example in the next patch. maybe_scc_exit() is called from update_branch_counts() for states that reach branch count of zero, meaning that path exploration for a particular path is finished. Path exploration can finish in one of three ways: a. Verification error is found. In this case, update_branch_counts() is called only for non-speculative paths. b. Top level BPF_EXIT is reached. Such instructions are never a part of an SCC, so compute_scc_callchain() in maybe_scc_exit() will return false, and maybe_scc_exit() will return early. c. A checkpoint is reached and matched. Checkpoints are created by is_state_visited(), which calls maybe_enter_scc(), which allocates bpf_scc_visit instances for checkpoints within SCCs. Hence, for non-speculative symbolic execution paths, the assumption still holds: if maybe_scc_exit() is called for a state within an SCC, bpf_scc_visit instance must exist. This patch removes the verifier_bug() call for speculative paths. | ||||
| CVE-2025-40142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts via spin_lock_irq(). This also implicitly disables the handling of softirqs such as TIMER_SOFTIRQ. On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not disable them. That means a timer can be invoked during spin_lock_irq() on the same CPU. Due to synchronisations reasons local_bh_disable() has a per-CPU lock named softirq_ctrl.lock which synchronizes individual softirq against each other. syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This is a possible deadlock. The softirq_ctrl.lock can not be made part of spin_lock_irq() as this would lead to too much synchronisation against individual threads on the system. To avoid the possible deadlock, softirqs must be manually disabled before the lock is acquired. Disable softirqs before the lock is acquired on PREEMPT_RT. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback In create_sdw_dailink() check that sof_end->codec_info->add_sidecar is not NULL before calling it. The original code assumed that if include_sidecar is true, the codec on that link has an add_sidecar callback. But there could be other codecs on the same link that do not have an add_sidecar callback. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-40130 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix data race in CPU latency PM QoS request handling The cpu_latency_qos_add/remove/update_request interfaces lack internal synchronization by design, requiring the caller to ensure thread safety. The current implementation relies on the 'pm_qos_enabled' flag, which is insufficient to prevent concurrent access and cannot serve as a proper synchronization mechanism. This has led to data races and list corruption issues. A typical race condition call trace is: [Thread A] ufshcd_pm_qos_exit() --> cpu_latency_qos_remove_request() --> cpu_latency_qos_apply(); --> pm_qos_update_target() --> plist_del <--(1) delete plist node --> memset(req, 0, sizeof(*req)); --> hba->pm_qos_enabled = false; [Thread B] ufshcd_devfreq_target --> ufshcd_devfreq_scale --> ufshcd_scale_clks --> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true --> cpu_latency_qos_update_request --> pm_qos_update_target --> plist_del <--(3) plist node use-after-free Introduces a dedicated mutex to serialize PM QoS operations, preventing data races and ensuring safe access to PM QoS resources, including sysfs interface reads. | ||||
| CVE-2025-40122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error When running perf_fuzzer on PTL, sometimes the below "unchecked MSR access error" is seen when accessing IA32_PMC_x_CFG_B MSRs. [ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30) [ 55.611280] Call Trace: [ 55.611282] <TASK> [ 55.611284] ? intel_pmu_config_acr+0x87/0x160 [ 55.611289] intel_pmu_enable_acr+0x6d/0x80 [ 55.611291] intel_pmu_enable_event+0xce/0x460 [ 55.611293] x86_pmu_start+0x78/0xb0 [ 55.611297] x86_pmu_enable+0x218/0x3a0 [ 55.611300] ? x86_pmu_enable+0x121/0x3a0 [ 55.611302] perf_pmu_enable+0x40/0x50 [ 55.611307] ctx_resched+0x19d/0x220 [ 55.611309] __perf_install_in_context+0x284/0x2f0 [ 55.611311] ? __pfx_remote_function+0x10/0x10 [ 55.611314] remote_function+0x52/0x70 [ 55.611317] ? __pfx_remote_function+0x10/0x10 [ 55.611319] generic_exec_single+0x84/0x150 [ 55.611323] smp_call_function_single+0xc5/0x1a0 [ 55.611326] ? __pfx_remote_function+0x10/0x10 [ 55.611329] perf_install_in_context+0xd1/0x1e0 [ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10 [ 55.611333] __do_sys_perf_event_open+0xa76/0x1040 [ 55.611336] __x64_sys_perf_event_open+0x26/0x30 [ 55.611337] x64_sys_call+0x1d8e/0x20c0 [ 55.611339] do_syscall_64+0x4f/0x120 [ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e On PTL, GP counter 0 and 1 doesn't support auto counter reload feature, thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR which requires to enable auto counter reload on GP counter 0. The root cause of causing this issue is the check for auto counter reload (ACR) counter mask from user space is incorrect in intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter mask from user space could be set into hw.config1 and then written into CFG_B MSRs and trigger the MSR access warning. e.g., User may create a perf event with ACR counter mask (config2=0xcb), and there is only 1 event created, so "cpuc->n_events" is 1. The correct check condition should be "i + idx >= cpuc->n_events" instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise, the counter mask would traverse twice and an invalid "cpuc->assign[1]" bit (bit 0) is set into hw.config1 and cause MSR accessing error. Besides, also check if the ACR counter mask corresponding events are ACR events. If not, filter out these counter mask. If a event is not a ACR event, it could be scheduled to an HW counter which doesn't support ACR. It's invalid to add their counter index in ACR counter mask. Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as user could set any invalid ACR counter mask and the warning message could mislead users. | ||||
| CVE-2025-40121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed. | ||||
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-40110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2025-40086 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't allow evicting of BOs in same VM in array of VM binds An array of VM binds can potentially evict other buffer objects (BOs) within the same VM under certain conditions, which may lead to NULL pointer dereferences later in the bind pipeline. To prevent this, clear the allow_res_evict flag in the xe_bo_validate call. v2: - Invert polarity of no_res_evict (Thomas) - Add comment in code explaining issue (Thomas) (cherry picked from commit 8b9ba8d6d95fe75fed6b0480bb03da4b321bea08) | ||||
| CVE-2025-40085 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card In try_to_register_card(), the return value of usb_ifnum_to_if() is passed directly to usb_interface_claimed() without a NULL check, which will lead to a NULL pointer dereference when creating an invalid USB audio device. Fix this by adding a check to ensure the interface pointer is valid before passing it to usb_interface_claimed(). | ||||
| CVE-2025-40073 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Do not validate SSPP when it is not ready Current code will validate current plane and previous plane to confirm they can share a SSPP with multi-rect mode. The SSPP is already allocated for previous plane, while current plane is not associated with any SSPP yet. Null pointer is referenced when validating the SSPP of current plane. Skip SSPP validation for current plane. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: SM8650 EV1 rev1 4slam 2et (DT) pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : dpu_plane_is_multirect_capable+0x68/0x90 lr : dpu_assign_plane_resources+0x288/0x410 sp : ffff800093dcb770 x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000 x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800 x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080 x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200 x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000 x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950 x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438 x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000 Call trace: dpu_plane_is_multirect_capable+0x68/0x90 (P) dpu_crtc_atomic_check+0x5bc/0x650 drm_atomic_helper_check_planes+0x13c/0x220 drm_atomic_helper_check+0x58/0xb8 msm_atomic_check+0xd8/0xf0 drm_atomic_check_only+0x4a8/0x968 drm_atomic_commit+0x50/0xd8 drm_atomic_helper_update_plane+0x140/0x188 __setplane_atomic+0xfc/0x148 drm_mode_setplane+0x164/0x378 drm_ioctl_kernel+0xc0/0x140 drm_ioctl+0x20c/0x500 __arm64_sys_ioctl+0xbc/0xf8 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x48/0xf8 do_el0_svc+0x28/0x40 el0_svc+0x30/0xd0 el0t_64_sync_handler+0x144/0x168 el0t_64_sync+0x198/0x1a0 Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1) ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/patch/669224/ | ||||
| CVE-2025-40072 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: Validate the return value of mnt_ns_from_dentry() before dereferencing The function do_fanotify_mark() does not validate if mnt_ns_from_dentry() returns NULL before dereferencing mntns->user_ns. This causes a NULL pointer dereference in do_fanotify_mark() if the path is not a mount namespace object. Fix this by checking mnt_ns_from_dentry()'s return value before dereferencing it. Before the patch $ gcc fanotify_nullptr.c -o fanotify_nullptr $ mkdir A $ ./fanotify_nullptr Fanotify fd: 3 fanotify_mark: Operation not permitted $ unshare -Urm Fanotify fd: 3 Killed int main(void){ int ffd; ffd = fanotify_init(FAN_CLASS_NOTIF | FAN_REPORT_MNT, 0); if(ffd < 0){ perror("fanotify_init"); exit(EXIT_FAILURE); } printf("Fanotify fd: %d\n",ffd); if(fanotify_mark(ffd, FAN_MARK_ADD | FAN_MARK_MNTNS, FAN_MNT_ATTACH, AT_FDCWD, "A") < 0){ perror("fanotify_mark"); exit(EXIT_FAILURE); } return 0; } After the patch $ gcc fanotify_nullptr.c -o fanotify_nullptr $ mkdir A $ ./fanotify_nullptr Fanotify fd: 3 fanotify_mark: Operation not permitted $ unshare -Urm Fanotify fd: 3 fanotify_mark: Invalid argument [ 25.694973] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 25.695006] #PF: supervisor read access in kernel mode [ 25.695012] #PF: error_code(0x0000) - not-present page [ 25.695017] PGD 109a30067 P4D 109a30067 PUD 142b46067 PMD 0 [ 25.695025] Oops: Oops: 0000 [#1] SMP NOPTI [ 25.695032] CPU: 4 UID: 1000 PID: 1478 Comm: fanotify_nullpt Not tainted 6.17.0-rc4 #1 PREEMPT(lazy) [ 25.695040] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 25.695049] RIP: 0010:do_fanotify_mark+0x817/0x950 [ 25.695066] Code: 04 00 00 e9 45 fd ff ff 48 8b 7c 24 48 4c 89 54 24 18 4c 89 5c 24 10 4c 89 0c 24 e8 b3 11 fc ff 4c 8b 54 24 18 4c 8b 5c 24 10 <48> 8b 78 38 4c 8b 0c 24 49 89 c4 e9 13 fd ff ff 8b 4c 24 28 85 c9 [ 25.695081] RSP: 0018:ffffd31c469e3c08 EFLAGS: 00010203 [ 25.695104] RAX: 0000000000000000 RBX: 0000000001000000 RCX: ffff8eb48aebd220 [ 25.695110] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8eb4835e8180 [ 25.695115] RBP: 0000000000000111 R08: 0000000000000000 R09: 0000000000000000 [ 25.695142] R10: ffff8eb48a7d56c0 R11: ffff8eb482bede00 R12: 00000000004012a7 [ 25.695148] R13: 0000000000000110 R14: 0000000000000001 R15: ffff8eb48a7d56c0 [ 25.695154] FS: 00007f8733bda740(0000) GS:ffff8eb61ce5f000(0000) knlGS:0000000000000000 [ 25.695162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.695170] CR2: 0000000000000038 CR3: 0000000136994006 CR4: 00000000003706f0 [ 25.695201] Call Trace: [ 25.695209] <TASK> [ 25.695215] __x64_sys_fanotify_mark+0x1f/0x30 [ 25.695222] do_syscall_64+0x82/0x2c0 ... | ||||
| CVE-2025-40071 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: Don't block input queue by waiting MSC Currently gsm_queue() processes incoming frames and when opening a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update(). If basic mode is used it calls gsm_modem_upd_via_msc() and it cannot block the input queue by waiting the response to come into the same input queue. Instead allow sending Modem Status Command without waiting for remote end to respond. Define a new function gsm_modem_send_initial_msc() for this purpose. As MSC is only valid for basic encoding, it does not do anything for advanced or when convergence layer type 2 is used. | ||||
| CVE-2025-40070 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pps: fix warning in pps_register_cdev when register device fail Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error handling in __video_register_device()"), the release hook should be set before device_register(). Otherwise, when device_register() return error and put_device() try to callback the release function, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: <TASK> kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Before commit c79a39dc8d06 ("pps: Fix a use-after-free"), pps_register_cdev() call device_create() to create pps->dev, which will init dev->release to device_create_release(). Now the comment is outdated, just remove it. Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed in pps_register_source() to avoid a double free in the failure case. | ||||