Export limit exceeded: 391639 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 391639 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (391639 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89623 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 3.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: stop device IO before hid_hw_stop Quiesce device IO at the start of the devm cleanup callback mcp2221_hid_unregister() so that incoming HID reports cannot race with hardware teardown during probe failure or device removal, addressing a potential use-after-free. Guard the call to hid_device_io_stop() with io_started. On normal removal hid_device_remove() has already cleared io_started before the devres group is released, so an unconditional call would otherwise hit the !io_started path and emit a spurious "io already stopped" warning on every removal. The guard preserves the probe-failure balancing, where io_started is still set after hid_device_io_start(), while staying silent on the normal removal path. | ||||
| CVE-2026-89621 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: validate report size in mcp2221_raw_event() mcp2221_raw_event() never validates the size of incoming HID reports. In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3] as the copy length without checking that 4 + data[3] bytes actually exist in the received report. A malicious or misbehaving USB device can send a short report with a large data[3], causing the memcpy to read past the valid report data in the HID transfer buffer and leak uninitialized kernel memory back to userspace through the I2C/SMBus read path. Add a minimum size check at entry and validate that the source range fits within the received report before the copy. | ||||
| CVE-2026-89618 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ] | ||||
| CVE-2026-89617 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate dirty page table on log replay Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk lcns_follow field. check_rstbl() validates the table bookkeeping but never checks that this array fits in the entry, so a crafted lcns_follow lets the v0->v1 conversion memmove and later replay passes run off the entry. Add check_dp_table() to reject, right after check_rstbl(), any entry larger than its size claims via struct_size() (the same expression used to allocate these entries, so the check is overflow-safe by construction). All consumers can then trust lcns_follow as the real capacity. This covers every page_lcns[] access whose index is bounded by the entry itself (the conversion memmove, the HotFix store via find_dp(), and the self-bounded scan loops). Accesses whose index comes from the log record need a separate bound and are handled in a follow-up patch. | ||||
| CVE-2026-89616 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame() ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target pages and then trusts decompress_lznt()'s return value: unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem, frame_size); if ((ssize_t)unc_size < 0) err = unc_size; else if (!unc_size || unc_size > frame_size) err = -EINVAL; decompress_lznt() stops as soon as the compressed stream is exhausted (e.g. a zero chunk header) and returns the number of bytes it actually wrote, which may be far less than frame_size. The bytes between unc_size and frame_size are never written. The only memset() that follows zeroes the region beyond i_valid; when the frame lies entirely within the file's valid size that memset() does not run, so the gap retains whatever was in the just-vmapped pages. All pages are then marked uptodate and returned to userspace, disclosing uninitialized (recently-freed) kernel page memory. A crafted compressed file whose stream decompresses to only a few bytes leaks the remainder of every frame on a plain read(2), which is enough to recover kernel pointers and defeat KASLR. Zero the [unc_size, frame_size) tail immediately after a successful LZNT decompress so the remainder reads back as zero. | ||||
| CVE-2026-89615 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound page_lcns[] index by the log record The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i, where i runs up to the log record's lcns_follow. That count is checked only against the record's own length, not the target entry, so check_dp_table() (which validates the entry's lcns_follow) does not cover it: the copy_lcns entry may even be freshly allocated after that check, and find_dp() bounds j but not i. A crafted record thus overflows page_lcns[] of an otherwise valid entry. Add dp_range_ok() and reject, before each loop, any record whose run does not fit the entry. These are the only two page_lcns[] accesses indexed by the record rather than the entry, so together with the entry validation every access is now bounded. [almaz.alexandrovich@paragon-software.com: original patch contained changes to the problem already handled, applied partly] | ||||
| CVE-2026-89609 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: hold msg ctx list lock when cleaning daemon queue ecryptfs_exorcise_daemon() drops queued messages from a dying daemon without holding ecryptfs_msg_ctx_lists_mux, but ecryptfs_msg_ctx_alloc_to_free() requires that lock. Take the list lock while moving the queued contexts back to the free list to avoid racing with other global msg ctx list users. | ||||
| CVE-2026-89608 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: pass packet set buffer size to parser ecryptfs_parse_packet_set() receives a pointer into the file header, but it calculates the remaining packet buffer size from PAGE_SIZE - 8. For version 1 headers the packet set starts later in the header, so this can overstate the available buffer. Pass the actual packet set buffer length from the caller and calculate per-packet limits from the remaining bytes in that buffer. Recompute the remaining length after consuming a tag 3 packet before parsing the following tag 11 packet. | ||||
| CVE-2026-89607 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key() sets decrypted_key_size = encrypted_key_size and performs two out-of-bounds writes: 1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into decrypted_key[64] via scatterlist, overflowing into the parent ecryptfs_auth_tok struct. 2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes into crypt_stat->key[64], corrupting root_iv, keysig_list, and mutexes in ecryptfs_crypt_stat. Only AES-192 (cipher code 0x08) enables this because it sets crypt_stat->key_size = 24 independently of encrypted_key_size, allowing crypto_skcipher_setkey() to succeed while encrypted_key_size exceeds ECRYPTFS_MAX_KEY_BYTES. The PKI decryption path (parse_tag_65_packet) already validates decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path omits this check. Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES (512). The 64-byte limit also protects the 512-byte encrypted_key[] buffer, so the former 512-byte check is removed as redundant. [tyhicks: Adjust the code comment to refer to macros representing the buffer sizes rather than mentioning the buffer size values since they may change in the future] | ||||
| CVE-2026-89606 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject too-small tag 70 packets ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the parsed packet body size to derive the encrypted filename size. A malformed packet with a body smaller than those fixed fields can underflow that size calculation. Reject tag 70 packets before the subtraction unless the body contains the signature, cipher code, and at least one byte of encrypted filename data. | ||||
| CVE-2026-89605 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer. | ||||
| CVE-2026-89604 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivileged users on the efivarfs mount point, which may result in a flood of calls to the QueryVariableInfo() runtime service. These calls are disproportionately costly on x86 systems where the variable store is backed by SMM, as each SMM entry requires a rendez-vous of all the CPUs. So rate limit the calls to QueryVariableInfo() at twice per second, and return the most recently obtained value for calls that are elided. | ||||
| CVE-2026-89603 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: entry: Fix seccomp bypass after ptrace with TSYNC Sashiko review pointed out the following issue. If a thread is stopped in syscall_trace_enter() for ptrace, another thread can install a seccomp filter with SECCOMP_FILTER_FLAG_TSYNC (e.g., via seccomp_attach_filter()). This will successfully set SYSCALL_WORK_SECCOMP on the stopped thread, but syscall_trace_enter() evaluates a cached 'work' variable sampled on entry. Consequently, the subsequent check for SYSCALL_WORK_SECCOMP misses the newly assigned flag, and the filter is silently bypassed. This race condition could allow an unprivileged process to execute a prohibited system call (e.g., execve) that the newly installed filter was intended to block, especially since the tracer might have modified the system call number during the ptrace stop. Fix this by re-reading the syscall_work flags after ptrace handling, so that any new SYSCALL_WORK_SECCOMP flag set by another thread via TSYNC during the ptrace stop is observed before the subsequent seccomp check. | ||||
| CVE-2026-89599 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: panel-dsi-cm: initialize lock before registering display dsicm_probe() registers the display before initializing ddata->lock. Once omapdss_register_display() publishes the display, another consumer can reach a dsicm callback that takes this mutex while it is still uninitialized. Initialize the mutex before registering the display so the published callbacks always see a valid lock. | ||||
| CVE-2026-89598 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2 stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables x_tables autofs4 [ 258.129215] Preemption disabled at: [ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340 [ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C 6.6.0-rc5-rockchip-rk356x #4 [ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT) [ 258.129243] Call trace: [ 258.129245] dump_backtrace+0xa0/0x128 [ 258.129252] show_stack+0x20/0x38 [ 258.129256] dump_stack_lvl+0x60/0xb0 [ 258.129265] dump_stack+0x18/0x28 [ 258.129269] __schedule_bug+0xa0/0xc8 [ 258.129274] __schedule+0x9ac/0xd30 [ 258.129279] schedule+0x60/0x100 [ 258.129282] schedule_timeout+0x194/0x338 [ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498 [ 258.129296] rk3x_i2c_xfer+0x20/0x60 [ 258.129300] __i2c_transfer+0x194/0x648 [ 258.129308] i2c_transfer+0x9c/0x130 [ 258.129313] i2c_transfer_buffer_flags+0x64/0x98 [ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb] [ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb] [ 258.129343] soft_cursor+0x13c/0x210 [ 258.129350] bit_cursor+0x2dc/0x550 [ 258.129354] fbcon_cursor+0xec/0x108 [ 258.129359] hide_cursor+0x44/0xc8 [ 258.129365] vt_console_print+0x398/0x3b0 [ 258.129370] console_flush_all.isra.0+0x17c/0x410 [ 258.129377] console_unlock+0x4c/0x100 [ 258.129382] vprintk_emit+0x1c8/0x340 [ 258.129386] vprintk_default+0x40/0x58 [ 258.129389] vprintk+0xb8/0xd0 [ 258.129392] _printk+0x68/0x98 [ 258.129398] watchdog_release+0x170/0x230 [ 258.129404] __fput+0xbc/0x288 [ 258.129409] __fput_sync+0x58/0x70 [ 258.129413] __arm64_sys_close+0x40/0x90 [ 258.129419] invoke_syscall+0x4c/0x118 [ 258.129426] el0_svc_common.constprop.0+0x48/0xf0 [ 258.129432] do_el0_svc+0x24/0x38 [ 258.129437] el0_svc+0x48/0x100 [ 258.129443] el0t_64_sync_handler+0xc0/0xc8 [ 258.129448] el0t_64_sync+0x190/0x198 [ 258.573087] ------------[ cut here ]------------ [ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871 preempt_count_sub+0x9c/0x148 [ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp ---truncated--- | ||||
| CVE-2026-89597 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-89596 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_resume() walk the non-PCI configuration space with for (i = 0; i <= np->register_size/sizeof(u32); i++) which runs one iteration too many. saved_config_space is declared as u32 saved_config_space[NV_PCI_REGSZ_MAX/4]; and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3 device register_size/sizeof(u32) is exactly the array length and the last iteration addresses one element past the end. The element it lands on is np->name_rx[0..3]: saved_config_space[] is followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no padding. Nothing observable is corrupted by that, because nv_request_irq() rewrites name_rx with sprintf() before it is ever passed to request_irq(). The bug is the out-of-bounds access itself, which UBSAN reports and which CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code, plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one dword past the range the driver mapped: np->base = ioremap(addr, np->register_size); VER1 and VER2 devices stay inside the array, but they too get the stray read and the stray write one dword past their own window. Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle. The splat below is trimmed: the build path in the file name, the CPU and taint lines, the Workqueue line, the "?" hint frames, and the frames below device_suspend are all cut. The kernel was tainted, with an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the stock module. UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25 index 385 is out of range for type 'u32 [385]' Call Trace: dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x54/0x59 __this_module+0xe398c/0xe9010 [forcedeth] pci_pm_suspend+0x80/0x170 dpm_run_callback+0x51/0x160 device_suspend+0x1a2/0x4a0 ... Both loops are hit. UBSAN reports each source location only once per module load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the two splats land in the first S3 cycle after the module is loaded and later cycles are silent even though the access still runs off the end every time. In that first cycle line 6225 is reported from pci_pm_suspend and line 6240 from pci_pm_resume. The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f ("forcedeth: fix buffer overflow") in 2012; these two loops were missed. The suspend and resume side was reported on LKML in September 2013 by Marc Weber, with the same analysis and the same one-character fix, but the patch was attached rather than sent inline and the thread ended there. Use < instead of <=, which saves and restores exactly register_size bytes. | ||||
| CVE-2026-89595 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new event bit, fanotify and inotify may avoid recalculating the object mask if the cached aggregate already contains that bit. This is racy with a recalculation triggered by a concurrent update to another mark on the same connector. The concurrent scan can read the mark before the new bit is added, while the updater reads the old aggregate before that scan publishes its result. The updater then skips recalculation and the scan publishes a mask without the bit, leaving the object mask stale after both updates complete. This can be reproduced with two fanotify groups watching the same inode: one thread removes FAN_MODIFY from one existing mark while another thread adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return, writes can fail to produce FAN_MODIFY for the group whose mark now contains the bit. This was reproduced on an unmodified v6.12.95 kernel. The equivalent inotify interleaving loses IN_MODIFY events. For normal fanotify additions, recalculate whenever the raw mark mask changes. The normal mask is not cleared asynchronously, so an unchanged addition cannot introduce missing interest. Always recalculate ignore-mask updates because FS_MODIFY handling may clear the ignore mask without taking mark->lock, making snapshot comparisons unreliable. Always recalculate after updating an existing inotify watch. Its replace path temporarily sets mark->mask to zero, so a concurrent scan can observe zero even when the old and final masks are equal. Assigning the replacement mask directly would avoid the transient zero, but existing-watch updates are infrequent, so unconditional recalculation is simpler. | ||||
| CVE-2026-89594 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI driver uses a synthetic HSI controller device allocated via hsi_alloc_controller(), which does not go through the normal OF/platform device initialization path. As a result, the embedded struct device does not have a DMA mask initialized by default. After recent DMA API hardening changes, dma_map_sg() and related helpers now require a valid dma_mask to be present, otherwise the driver may crash or trigger warnings when attempting DMA mapping operations. Fix this by explicitly initializing the DMA mask for the SSI controller device and setting a 32-bit DMA mask, which matches the hardware capabilities. | ||||
| CVE-2026-89593 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In the case of folio mapped in both a parent and a child, if the parent unmaps the range first, the reservation adjustment will result in an underflow of the reserved count. Once the child unmaps the range, the count is restored. Change __unmap_hugepage_range() to check the mapcount before adjusting the reservation. | ||||