Export limit exceeded: 25069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54241 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: KVM: Fix NULL pointer dereference After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we get a NULL pointer dereference when creating a KVM guest: [ 146.243409] Starting KVM with MIPS VZ extensions [ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c [ 149.849177] Oops[#1]: [ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671 [ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020 [ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740 [ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000 [ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0 [ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0 [ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000 [ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000 [ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0 [ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c [ 149.849293] Hi : 00000335b2111e66 [ 149.849295] Lo : 6668d90061ae0ae9 [ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm] [ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE [ 149.849351] Cause : 1000000c (ExcCode 03) [ 149.849354] BadVA : 0000000000000300 [ 149.849357] PrId : 0014c004 (ICT Loongson-3) [ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables [ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030) [ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4 [ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000 [ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920 [ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240 [ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010 [ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000 [ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28 [ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0 [ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255 [ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255 [ 149.849558] ... [ 149.849565] Call Trace: [ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm] [ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm] [ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118 [ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58 The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu ->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded object. | ||||
| CVE-2023-54240 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all() rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid NULL pointer dereference. | ||||
| CVE-2025-8066 | 2 Bunkerity, Linux | 2 Bunker Web, Linux | 2026-04-15 | N/A |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Bunkerity Bunker Web on Linux allows Phishing.This issue affects Bunker Web: 1.6.2. | ||||
| CVE-2023-54239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Check for uptr overflow syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-53728 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. | ||||
| CVE-2025-68186 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up The function ring_buffer_map_get_reader() is a bit more strict than the other get reader functions, and except for certain situations the rb_get_reader_page() should not return NULL. If it does, it triggers a warning. This warning was triggering but after looking at why, it was because another acceptable situation was happening and it wasn't checked for. If the reader catches up to the writer and there's still data to be read on the reader page, then the rb_get_reader_page() will return NULL as there's no new page to get. In this situation, the reader page should not be updated and no warning should trigger. | ||||
| CVE-2025-68355 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exclusive map memory leak When excl_prog_hash is 0 and excl_prog_hash_size is non-zero, the map also needs to be freed. Otherwise, the map memory will not be reclaimed, just like the memory leak problem reported by syzbot [1]. syzbot reported: BUG: memory leak backtrace (crc 7b9fb9b4): map_create+0x322/0x11e0 kernel/bpf/syscall.c:1512 __sys_bpf+0x3556/0x3610 kernel/bpf/syscall.c:6131 | ||||
| CVE-2025-68361 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: limit the level of fs stacking for file-backed mounts Otherwise, it could cause potential kernel stack overflow (e.g., EROFS mounting itself). | ||||
| CVE-2025-68368 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: init bioset in mddev_init IO operations may be needed before md_run(), such as updating metadata after writing sysfs. Without bioset, this triggers a NULL pointer dereference as below: BUG: kernel NULL pointer dereference, address: 0000000000000020 Call Trace: md_update_sb+0x658/0xe00 new_level_store+0xc5/0x120 md_attr_store+0xc9/0x1e0 sysfs_kf_write+0x6f/0xa0 kernfs_fop_write_iter+0x141/0x2a0 vfs_write+0x1fc/0x5a0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x2818/0x2880 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reproducer ``` mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd] echo inactive > /sys/block/md0/md/array_state echo 10 > /sys/block/md0/md/new_level ``` mddev_init() can only be called once per mddev, no need to test if bioset has been initialized anymore. | ||||
| CVE-2025-68292 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/memfd: fix information leak in hugetlb folios When allocating hugetlb folios for memfd, three initialization steps are missing: 1. Folios are not zeroed, leading to kernel memory disclosure to userspace 2. Folios are not marked uptodate before adding to page cache 3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache() The memfd allocation path bypasses the normal page fault handler (hugetlb_no_page) which would handle all of these initialization steps. This is problematic especially for udmabuf use cases where folios are pinned and directly accessed by userspace via DMA. Fix by matching the initialization pattern used in hugetlb_no_page(): - Zero the folio using folio_zero_user() which is optimized for huge pages - Mark it uptodate with folio_mark_uptodate() - Take hugetlb_fault_mutex before adding to page cache to prevent races The folio_zero_user() change also fixes a potential security issue where uninitialized kernel memory could be disclosed to userspace through read() or mmap() operations on the memfd. | ||||
| CVE-2025-68375 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Fix NULL event access and potential PEBS record loss When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the perf_event_overflow() could be called to process the last PEBS record. While perf_event_overflow() could trigger the interrupt throttle and stop all events of the group, like what the below call-chain shows. perf_event_overflow() -> __perf_event_overflow() ->__perf_event_account_interrupt() -> perf_event_throttle_group() -> perf_event_throttle() -> event->pmu->stop() -> x86_pmu_stop() The side effect of stopping the events is that all corresponding event pointers in cpuc->events[] array are cleared to NULL. Assume there are two PEBS events (event a and event b) in a group. When intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the last PEBS record of PEBS event a, interrupt throttle is triggered and all pointers of event a and event b are cleared to NULL. Then intel_pmu_drain_pebs_icl() tries to process the last PEBS record of event b and encounters NULL pointer access. To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del(). It's safe since cpuc->active_mask or cpuc->pebs_enabled is always checked before access the event pointer from cpuc->events[]. | ||||
| CVE-2025-71195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault | ||||
| CVE-2025-68733 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix bug: unprivileged task can create labels If an unprivileged task is allowed to relabel itself (/smack/relabel-self is not empty), it can freely create new labels by writing their names into own /proc/PID/attr/smack/current This occurs because do_setattr() imports the provided label in advance, before checking "relabel-self" list. This change ensures that the "relabel-self" list is checked before importing the label. | ||||
| CVE-2025-68739 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: hisi: Fix potential UAF in OPP handling Ensure all required data is acquired before calling dev_pm_opp_put(opp) to maintain correct resource acquisition and release order. | ||||
| CVE-2022-50582 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Prevent integer underflow By using a ratio of delay to poll_enabled_time that is not integer time_remaining underflows and does not exit the loop as expected. As delay could be derived from DT and poll_enabled_time is defined in the driver this can easily happen. Use a signed iterator to make sure that the loop exits once the remaining time is negative. | ||||
| CVE-2022-50882 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix memory leak in uvc_gpio_parse Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") | ||||
| CVE-2025-23332 | 2 Linux, Nvidia | 10 Linux, Display Driver, Driver and 7 more | 2026-04-15 | 5 Medium |
| NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where an attacker might be able to trigger a null pointer deference. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2023-54222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id() The "map_sz" is the number of elements in the "m" array so the > comparison needs to be changed to >= to prevent an out of bounds read. | ||||