Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90104 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | ||||
| CVE-2026-90113 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. | ||||
| CVE-2026-90118 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end. | ||||
| CVE-2026-90123 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate. | ||||
| CVE-2026-90125 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv(). | ||||
| CVE-2026-90134 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping. | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-54578 | 1 Midnightbsd | 1 Mport | 2026-09-19 | N/A |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, mport_verify_package() in libmport/verify.c could continue after MD5File() or SHA256_File() failed and compare an expected checksum with stale data in the hash buffer rather than a newly computed digest. An attacker able to influence an installed file or the conditions that make hashing fail could receive a misleading integrity result or hide a checksum failure. This issue is fixed in version 2.7.8. | ||||
| CVE-2026-54495 | 1 Open-feature | 1 Open-feature-operator | 2026-09-18 | 4.3 Medium |
| The OpenFeature Operator allows users to expose feature flags to applications. In version 0.9.2 and earlier, a tenant who can create a controller-owned workload can use the openfeature.dev/featureflagsource annotation with NAMESPACE/NAME syntax to reference a FeatureFlagSource or InProcessConfiguration in another namespace. On multi-tenant clusters that use namespaces as trust boundaries, the cluster-scoped operator reads that resource and materializes spec.envVars literal values, spec.httpSyncBearerToken, sync URIs, and supporting ConfigMaps into the tenant's workload. Single-tenant clusters are not impacted, secretKeyRef and configMapKeyRef values remain namespace-local, and creating a FeatureFlagSource is not required. | ||||
| CVE-2026-93394 | 1 Mongodb | 1 C Driver | 2026-09-18 | 3.7 Low |
| A flaw in libmongoc's SCRAM authentication implementation caused the client to continue the authentication handshake and transmit the client proof even when a nonce mismatch was detected in the server's first message. An unauthorized party with a man-in-the-middle position could exploit this by injecting a crafted server-first-message containing a controlled salt and low iteration count, then capturing the resulting client proof to perform offline password cracking. This vulnerability is mitigated by TLS, which is standard in production deployments. | ||||
| CVE-2026-69399 | 1 Microsoft | 1 Azure Arc | 2026-09-18 | 10 Critical |
| Azure Arc Elevation of Privilege Vulnerability | ||||
| CVE-2026-93578 | 1 Redhat | 1 Camel Spring Boot | 2026-09-18 | 5.9 Medium |
| A flaw was found in Netty's Online Certificate Status Protocol (OCSP) Client. The client fails to verify the 'id-kp-OCSPSigning' Extended Key Usage (EKU) in OCSP responder certificates. A remote attacker, holding any valid certificate issued by the same Certificate Authority (CA), can exploit this by forging 'GOOD' OCSP responses for revoked certificates. This bypasses certificate revocation checks, allowing applications using Netty's OCSP Client to accept certificates that should have been revoked, leading to an authorization bypass. | ||||
| CVE-2026-93566 | 1 Redhat | 12 Amq Broker, Amq Clients, Apicurio Registry and 9 more | 2026-09-18 | 6.5 Medium |
| A flaw was found in Netty. A remote attacker could exploit this by sending a specially crafted HTTP request that includes control characters within the chunk-size line. This bypasses the intended strict validation, allowing the attacker to inject arbitrary HTTP requests. This vulnerability can lead to HTTP request smuggling, potentially resulting in information disclosure or other unauthorized actions. | ||||
| CVE-2026-93569 | 1 Redhat | 11 Amq Broker, Apicurio Registry, Build Keycloak and 8 more | 2026-09-18 | 8.2 High |
| A flaw was found in Netty. A remote unauthenticated attacker can exploit a vulnerability in Netty's HTTP/1 to HTTP/2 conversion process. When an HTTP/1 request includes both an absolute-form request-target and a conflicting Host header, Netty incorrectly prioritizes the Host header for the HTTP/2 :authority field, discarding the original request-target authority. This inconsistency can allow an attacker to bypass security controls in Netty-based proxies or gateways, potentially leading to unauthorized access, cache poisoning, or misrouting of requests. | ||||
| CVE-2026-93576 | 1 Redhat | 4 Camel Spring Boot, Jboss Enterprise Application Platform, Jboss Fuse and 1 more | 2026-09-18 | 7.5 High |
| A flaw was found in Netty netty-codec-smtp. The component does not properly validate Carriage Return (CR) and Line Feed (LF) characters in the SMTP command-name field. A remote attacker, if an application routes untrusted input into this field, can embed CR/LF characters to inject arbitrary SMTP commands. This can lead to SMTP command smuggling, allowing for unauthorized email relay or spoofing of sender/recipient addresses. While the impact is significant, the real-world exploitability is considered lower as applications typically do not place user-controlled data in the command-name field. | ||||
| CVE-2026-93685 | 1 Redhat | 1 Acm | 2026-09-18 | 5.4 Medium |
| A flaw was found in the multicluster-observability-addon. A remote attacker can access a debug endpoint without authentication, due to a misconfiguration in the underlying addon-framework library. This allows for the disclosure of sensitive operational information, such as goroutine, heap, and command-line details, after completing a basic encrypted connection. This vulnerability does not enable direct remote code execution. | ||||
| CVE-2026-91707 | 2 Elegant Themes, Wordpress | 2 Divi, Wordpress | 2026-09-18 | 5.3 Medium |
| The The Divi theme for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.11.1. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. When the 'Force Enable D4 Shortcode Framework' option is enabled, this includes invoking the et_pb_contact_form shortcode to send email to an attacker-selected recipient with attacker-controlled content. | ||||
| CVE-2026-85885 | 1 Microsoft | 1 365 Copilot | 2026-09-18 | 9.9 Critical |
| Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-85917 | 1 Microsoft | 1 Azure Ai Foundry | 2026-09-18 | 7.5 High |
| Server-side request forgery (ssrf) in Azure AI Foundry allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-87886 | 2 Acronis, Linux | 5 Acronis Backup, Backup Extension For Plesk, Backup Plugin For Cpanel \& Whm and 2 more | 2026-09-18 | N/A |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. | ||||