Export limit exceeded: 23517 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23517 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80897 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: release readahead folios on iterator preparation failure netfs_prepare_read_iterator() batches readahead folios in put_batch so that the folio references can be dropped after the I/O iterator has been prepared. If rolling_buffer_load_from_ra() fails after earlier folios have been batched, the function returns immediately and leaves those references held. Release the batch before returning the error. | ||||
| CVE-2026-80899 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: remove fscache backend entirely EROFS over fscache was introduced to provide image lazy pulling functionality. After the feature landed, the fscache subsystem made netfs a new hard dependency, which is unexpected for a local filesystem and has an kernel-defined caching hierarchy which could be inflexible compared to the fanotify pre-content hooks. Therefore, this feature has been deprecated for almost two years. As EROFS file-backed mounts and fanotify pre-content hooks both upstream for a while and already providing equivalent functionality (erofs-utils has supported fanotify pre-content hooks), let's remove the fscache backend now. The main application of this feature is Nydus [1], and they plan to move to use fanotify pre-content hooks in the near future too. I hope this patch can be merged into Linux 7.2, which is also motivated by newly found implementation issues [2][3] that are not worth investigating given the deprecation and limited development resources. The associated fscache/cachefiles cleanup patch will follow separately through the vfs tree (netfs) later: it seems fine since the codebase is isolated by CONFIG_CACHEFILES_ONDEMAND. [1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md [2] https://github.com/dragonflyoss/nydus/pull/1824 [3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com | ||||
| CVE-2026-80901 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix the checksum validations ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6 packets from clients. In fact, as for TCP/UDP we should validate the checksum for ICMP packets only when we mangle the packets on MASQ or on reply for tunnel. Also, Sashiko points out that handle_response_icmp() being common for IPv4 and IPv6 is missing the pseudo-header calculation while validating ICMPv6 messages from real servers which is a problem if checksum is not validated by the hardware. Fix the problems by creating ip_vs_checksum_common_check() helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6. Rely on the nf_checksum() for validating the ICMP messages but use it also for TCP and UDP. Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP. IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum validation on LOCAL_OUT (local clients or local real servers) and on FORWARD (traffic from servers on LAN). Do it only on LOCAL_IN, in case nf_checksum() is not called on PRE_ROUTING. Also, ip_vs_checksum_complete() can be marked static. | ||||
| CVE-2026-80903 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix sync entry leak on OA config emit failure xe_oa_emit_oa_config() releases the sync entries and the syncs array only on its success path. When it fails before the point of no return (fence allocation, config buffer allocation or batch submission), it returns without touching stream->syncs. The stream open path handles such failures in the caller, but xe_oa_config_locked() propagates the error without any cleanup, so the syncs array and the fence references held by the parsed entries are leaked. The next config ioctl overwrites stream->syncs, making the memory unreachable for good. Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching the cleanup done by the stream open error path. (cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) | ||||
| CVE-2026-80907 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix UVD dpb min size calculation for H264 This should use actual number of references from the decode message, instead of maximum derived from level. (cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856) | ||||
| CVE-2026-80908 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reject UVD message with dimensions above 4096 Fixes potential overflow in DPB size calculations. (cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10) | ||||
| CVE-2026-80909 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reject UVD message with invalid number of h265 refs Same change as for h264, avoids overflow later when calculating min dpb size. (cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5) | ||||
| CVE-2026-80913 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: require every boolean value to be defined p_bools.nprim comes from the policy image independently of how many booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at value - 1, so a count larger than the values present leaves NULL entries. Every user of that array then walks it by index and dereferences each entry: cond_evaluate_expr() on the access-vector path, security_get_bools() and security_get_bool_value() behind selinuxfs, and security_set_bools(). A sparse class value is absorbed by policydb_class_isvalid() and its siblings; booleans have no such predicate, and no consumer that could use one. Reject a boolean value that no boolean defines, once, where the array is built. Conforming policies define every boolean they declare and are unaffected. | ||||
| CVE-2026-24252 | 2 Linux, Nvidia | 3 Linux Kernel, Nemo, Nemo Framework | 2026-09-04 | 7.8 High |
| NVIDIA NeMo for Linux contains a vulnerability where an attacker may cause OS command injection. A successful exploit of this vulnerability may lead to code execution, data tampering, escalation of privileges and information disclosure. | ||||
| CVE-2026-80866 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(), allowing the thread to sleep properly until the work queue count reaches zero. Accordingly, update cleanup_bearer() to use atomic_dec_and_test() and wake_up_var() to wake up the waiter when the count drops to zero. This uses the global wait queue hash table, avoiding the need to bloat struct tipc_net with a wait_queue_head_t. The atomic_dec_and_test() provides the necessary memory barrier to ensure the wakeup is not missed. | ||||
| CVE-2026-80867 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: alpha/PCI: Add security_locked_down() check to pci_mmap_resource() Currently, Alpha's pci_mmap_resource() does not check security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap PCI BARs. The generic version has had this check since commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") to prevent DMA attacks when the kernel is locked down. Add the same check to Alpha's pci_mmap_resource(). | ||||
| CVE-2026-80869 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the attribute-list entry in ntfs_read_inode_mount() The $MFT attribute-list walk in ntfs_read_inode_mount() validates each entry only with "(u8 *)al_entry + 6 > al_end" and "(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference (offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length is attacker-controlled and only required non-zero, so a short entry (e.g. length 8) placed at the tail passes both checks while the lowest_vcn / mft_reference reads fall past al_end. al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding usually absorbs the over-read -- but when attr_list_size is a multiple of SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an out-of-bounds read at mount time. Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch 1/3) before dereferencing it, matching the bound the other attribute-list walks now use. The validator already requires the length to cover the fixed header, which makes the separate "!al_entry->length" check redundant, so drop it too. | ||||
| CVE-2026-80870 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Validate CRIU-restored IDs before idr_alloc The KFD CRIU restore flow restores previously saved object IDs from userspace. For event restore: kfd_criu_restore_event() -> create_signal_event() / create_other_event() -> allocate_event_notification_slot() -> idr_alloc(..., *restore_id, *restore_id + 1, ...) For BO restore: criu_restore_memory_of_gpu() -> idr_alloc(..., bo_priv->idr_handle, ...) In both cases, the restored ID comes from userspace-provided CRIU data. idr_alloc() expects the ID range values to fit within signed int limits. If a restored ID is larger than INT_MAX, it can trigger a WARN in the IDR layer. A kernel WARN is undesirable because it prints a warning trace and may cause a panic or reboot on systems with panic_on_warn enabled. Smatch reported these paths as allowing unchecked userspace values to reach idr_alloc(). Add INT_MAX validation before using restored IDs in: - kfd_criu_restore_event() - criu_restore_memory_of_gpu() If the restored ID is invalid, return -EINVAL. This prevents invalid restore data from reaching the IDR layer and avoids WARN-triggering paths, while keeping valid restore behavior unchanged. | ||||
| CVE-2026-80872 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/tas2781: Cancel async firmware request at unbind TAS2781 HDA I2C and SPI queue RCA firmware loading from component bind with request_firmware_nowait(). The firmware loader keeps the callback module pinned and holds a device reference, but the callback still uses driver-private HDA state. Component unbind removes controls and DSP state immediately. Later device removal tears down the TAS2781 private data, including codec_lock. If the async firmware callback runs after unbind has started, it can operate on state that is being torn down. Cancel or synchronize the async firmware request before removing controls and DSP state. A queued callback is cancelled, and an already-running callback is allowed to finish before unbind continues. | ||||
| CVE-2026-80874 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: renesas: ironhide: Describe inline ECC carveouts The DBSC5 DRAM controller protects DRAM content using inline ECC. The inline ECC utilizes areas of DRAM for its operation, which are in the DRAM address range, but must not be accessed or modified. Describe the inline ECC carveout areas used by the DBSC5 controller on this hardware as reserved-memory, which must not be accessed. Include DRAM areas which are unprotected by ECC as well, those are parts of the DRAM which directly precede the ECC carveout. In case of high DRAM utilization, unless the inline ECC carveouts are properly reserved, Linux may use and corrupt the memory used by the DBSC5 DRAM controller for inline ECC, which would lead to the system becoming unstable. | ||||
| CVE-2026-80882 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Return ENOMEM when input buffer allocation fails for ccm Ensure the ENOMEM error value is set when the input buffer allocation fails in tegra_ccm_do_one_req. | ||||
| CVE-2026-80884 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntb: Store original DMA address for future release The DMA API requires that dma_free_attrs receive the exact dma_handle originally returned by the allocation function. Do not modify it. | ||||
| CVE-2026-80886 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: msm: Disable DMA for kernel console UART At the moment, concurrent writes from userspace and the kernel to the console can trigger a race condition that results in an infinite loop of the same messages printed over and over again. This is most likely to happen during system startup or shutdown when the init system starts/stops a large number of system services that interact with various kernel code. When userspace writes to the TTY device, the driver initiates an asynchronous DMA transfer and releases the port lock. At the same moment, the kernel printk path might grab the port lock and re-configure the UART controller for PIO, without waiting for the DMA operation to complete. It seems like this collision results in zero progress being reported for the DMA engine, so the same text is printed to the console over and over again. For the kernel console, we want a reliable output path that will be functional even during crashes etc. So rather than implementing complex code to synchronize the kernel console write routines with the userspace DMA write routines, simply disable DMA for the console UART instance. Similar checks exist in many other serial drivers, e.g. 8250_port.c, imx.c, sh-sci.c etc. | ||||
| CVE-2026-80888 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: drop dma_buf reference on foreign-fd prime import ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's dma_buf->ops do not match the ttm_object_device's ops, but does so without releasing the reference acquired by dma_buf_get(). Any unprivileged renderD client passing a non-vmwgfx prime fd through the DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per call and indefinitely pins the foreign exporter's GEM resources. Funnel the error path through the existing dma_buf_put() so the reference is always dropped. | ||||
| CVE-2026-80892 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: cap LZMA stream pool size fs/erofs/decompressor_lzma.c sizes the module-global MicroLZMA stream pool from num_possible_cpus() when the lzma_streams module parameter is unset, then z_erofs_load_lzma_config() preallocates one image-supplied dictionary per stream, accepting dictionaries up to 8 MiB. On high-CPU systems, a small EROFS image can pin hundreds of MiB of vmalloc-backed decoder state until the erofs module is unloaded. Impact: An EROFS image mounted by the system can pin up to 8 MiB of vmalloc memory per LZMA stream, either as intended or unexpectedly. Bound the default stream count by a new CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS option, default 16, so the worst-case default preallocation is 128 MiB if the number of CPUs is no less than 16 while preserving the existing per-image dictionary limit. An explicit lzma_streams module parameter is still honoured as-is, so administrators who deliberately size the pool are not affected. | ||||