Export limit exceeded: 390749 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390749 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89661 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent post-shutdown use-after-free in unlock_filesystem Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the handler confirms that nn->nfsd_serv is set. Once nfsd has shut down, nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the pointer intact, so the cancel helper iterates freed slab memory as an array of struct list_head and then dereferences a bogus nfs4_client when it takes clp->async_lock. A local administrator holding CAP_SYS_ADMIN can reach this use-after-free by stopping the server and then writing to unlock_filesystem; KASAN reports a slab-use-after-free read in nfsd4_cancel_copy_by_sb(). nfsd4_revoke_states() walks the same state tables and for that reason already runs only under nfsd_mutex with nn->nfsd_serv confirmed present. Move the async COPY cancel into that protected section so every NFSv4 state-table walker on this path observes a running server. Async copies exist only while the server runs, so gating the cancel on nn->nfsd_serv loses nothing. | ||||
| CVE-2026-89660 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during admin state revocation A stateid holds only a bare pointer to its nfs4_client; a stateid reference does not pin it. The client survives only because __destroy_client() drains its stateids before free_client() runs. nfsd4_revoke_states() drops nn->client_lock across revoke_one_stid(), which dereferences the client to revoke a stateid and read clp->cl_minorversion. A teardown racing the dropped lock can free the client first. Pinning cl_rpc_users under client_lock blocks the DESTROY_CLIENTID and EXCHANGE_ID teardown, which refuses while cl_rpc_users is non-zero. force_expire_client() ignores it: once its wait for cl_rpc_users to reach zero has passed, a later pin goes unnoticed. Under client_lock, skip a client whose cl_time is already zero -- force_expire_client() clears it there before waiting -- otherwise pin cl_rpc_users before dropping the lock. The walk then either sees the expiry and skips, or pins in time for that wait to cover the revoke. | ||||
| CVE-2026-89659 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during delegation revoke A delegation stateid holds only a bare pointer to its owning nfs4_client and does not keep it alive. The client survives its stateids only because __destroy_client() drains cl_delegations and cl_revoked before free_client() runs. nfs4_laundromat() breaks that invariant: it unhashes an expired delegation from cl_delegations, drops deleg_lock, then revoke_delegation() relinks it onto cl_revoked under cl_lock. In that window the delegation is on neither list, so client_has_state() can report no remaining state. Every teardown path first requires cl_rpc_users to be zero, but the laundromat holds no such reference. A client whose recalled delegation has just timed out can therefore reach free_client() while revoke_delegation() is still about to dereference cl_lock, a use-after-free. Pin the client with cl_rpc_users across the revoke so teardown blocks until it completes, then reap the delegation from cl_revoked. A client already expiring reaps its own, so skip it and leave the delegation on del_recall_lru. | ||||
| CVE-2026-89658 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during NFSv4.0 revoked-state cleanup nfs40_clean_admin_revoked() takes a stateid reference under clp->cl_lock, drops nn->client_lock, and calls nfsd4_drop_revoked_stid(), which dereferences the stateid's client through s->sc_client->cl_lock. The stateid reference does not pin the client, so a teardown racing the dropped lock can free the client while nfsd4_drop_revoked_stid() is still using it. This cleanup runs from the laundromat, so a periodic sweep can race force_expire_client() driven by a write to the clients/<id>/ctl file. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states(). | ||||
| CVE-2026-89657 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: validate OSD extent maps before cursor advance net/ceph/osd_client.c:osd_sparse_read() validates that the sparse-read data length matches the summed extent lengths, but it does not validate that each OSD-supplied extent is monotonic and lies inside the original request range. A malformed authenticated OSD reply can advertise a far-forward nonzero extent offset with a matching data length and make the client advance the message-data cursor beyond the request buffer. This reaches the BUG_ON(!*length) assertion in ceph_msg_data_next() from the client receive path. Impact: A malicious or compromised authenticated Ceph OSD peer can crash a kernel Ceph client via a malformed sparse-read reply. Reject sparse extent maps that overflow, move backwards, overlap, or extend outside the original sparse-read request before advancing the cursor. [ idryomov: perform sparse_extent_map_valid() check a bit earlier, in CEPH_SPARSE_READ_DATA_LEN instead of CEPH_SPARSE_READ_DATA_PRE state ] | ||||
| CVE-2026-89655 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again. | ||||
| CVE-2026-89654 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in check_new_map() on session freed during unlock check_new_map() iterates mdsc->sessions[] and for each active session drops mdsc->mutex to perform per-session operations. The forced-close path (rank removed from map) correctly takes a reference on s via ceph_get_mds_session() before releasing mdsc->mutex, but three other paths do not: Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex) Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s) Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex) Without the extra reference, another thread can acquire mdsc->mutex during the unlock window, call __unregister_session() which drops the last reference on s, and free it. The original thread then accesses freed memory via s->s_mutex. Fix by adding ceph_get_mds_session(s) before each mutex_unlock and ceph_put_mds_session(s) after the corresponding mutex_lock, matching the pattern already used in the forced-close path. Race timeline (Path A): Thread A (check_new_map) Thread B (another map update holds mdsc->mutex or session teardown) -------------------------- -------------------------- s = mdsc->sessions[i] (refcount == 1, held only by sessions[] array) mutex_unlock(&mdsc->mutex) ---> acquires mdsc->mutex __unregister_session(mdsc, s) sessions[i] = NULL ceph_put_mds_session(s) refcount: 1 -> 0 kfree(s) <--- freed! mutex_lock(&s->s_mutex) UAF on freed s->s_mutex | ||||
| CVE-2026-89652 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). | ||||
| CVE-2026-89651 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound MDSCapAuth path and fs_name decode in handle_session() handle_session() decodes the MDSCapAuth records carried by a CEPH_SESSION_OPEN message (msg_version >= 6). For each record the match.path and match.fs_name byte strings are read by first decoding a 32-bit length and then copying that many bytes with the bare ceph_decode_copy(). Unlike the surrounding fields, which all use the _safe decode variants, these two copies are not preceded by a ceph_decode_need() bounds check, and the enclosing MDSCapAuth and MDSCapMatch struct_len fields are skipped rather than enforced as an upper bound. A length larger than the bytes remaining in the message front makes ceph_decode_copy() read past the end of the front buffer. The message front is a dedicated allocation (ceph_msg_new2() -> kvmalloc), so the over-read runs off that object. A malicious or compromised MDS can trigger this with the first post-connect message on mount, with no client-side user interaction; under KASAN it is reported as a slab-out-of-bounds read in handle_session(). Impact: a malicious MDS can force the kernel client to read up to 4 GiB past the message front allocation during session setup, crashing the client (out-of-bounds read). Switch both copies to ceph_decode_copy_safe(), which performs the ceph_decode_need() bounds check before the copy and branches to the existing bad label, matching the rest of the decoder and the error path that frees the partially decoded cap_auths array. | ||||
| CVE-2026-89650 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound num_export_targets array for mds info v2/v3 ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from each per-mds info record and advances the decode cursor by num_export_targets * sizeof(u32) without first checking that many bytes remain. The only upper-bound check that catches a runaway cursor (*p > info_end) is gated on info_v >= 4, because info_end is left NULL for info_v 2 and 3. When the monitor sends an MDS map whose per-mds info version is 2 or 3 with an oversized num_export_targets, the cursor moves past the message front buffer and the later export-targets loop calls the unchecked ceph_decode_32() on out-of-bounds memory. A kernel client processes CEPH_MSG_MDS_MAP from its monitor session (net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an on-path attacker on an unsigned/unencrypted messenger session, can therefore drive an out-of-bounds read in the client kernel; on x86_64 with KASAN it is reported as a slab-out-of-bounds read in ceph_mdsmap_decode(). The decoded values land in the internal info->export_targets[] array, so the consequence is a kernel out-of-bounds read, not an information leak to the attacker. Impact: a malicious or compromised Ceph monitor sending an MDS map with a per-mds info version of 2 or 3 and an oversized num_export_targets field triggers an out-of-bounds read in the CephFS client kernel. Add a ceph_decode_need() for the export-targets array before advancing the cursor, so the bound is enforced for every info_v >= 2, not only info_v >= 4. This mirrors the count-then-need idiom already used for m_data_pg_pools later in the same function. Compute the export-targets byte count with size_mul() and reuse that checked length when advancing the cursor, so the attacker-controlled num_export_targets multiplication fails closed on overflow rather than relying on the later kcalloc() guard. | ||||
| CVE-2026-89649 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound xattr value length in __build_xattrs() __build_xattrs() decodes the MDS-supplied xattr blob one attribute at a time. For each attribute it reads a 32-bit name length, advances past the name bytes, reads a 32-bit value length, records the value pointer, and advances past the value bytes. The two length fields are read with ceph_decode_32_safe(), but the value bytes themselves are advanced over with a bare "p += len" and no ceph_decode_need() check that "len" bytes remain in the blob. For every attribute except the last, the next iteration's ceph_decode_32_safe() on the following name length implicitly verifies that the previous value did not run past the blob end. The final attribute has no successor, so its decoded value length is never checked against the blob bounds. A malicious or compromised metadata server can set the last attribute's value length larger than the bytes actually present in the blob. The blob is a dedicated kvmalloc() allocation sized to the wire length (ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the oversized length in xattr->val_len verbatim, and a later getxattr(2) runs memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer, copying bytes past the end of the allocation back to user space. Impact: a malicious metadata server discloses adjacent kernel heap bytes to a local user via getxattr(2) on a CephFS file. Add the missing ceph_decode_need() so an out-of-bounds value length on the final attribute fails the decode and returns -EIO instead of being stored. | ||||
| CVE-2026-89648 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: cap delegated inode count in ceph_parse_deleg_inos() ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers from an MDS create-with-delegation reply. For each set it reads a 64-bit start and a 64-bit len with ceph_decode_64_safe(), which only validates that the eight bytes are present in the message, not the value, and then loops over len while inserting entries into s_delegated_inos. len is fully attacker controlled. A malicious or compromised MDS can send one huge interval, many intervals in one reply, duplicate intervals, or repeated replies that accumulate delegated inodes on the same session. The original code bounded none of these and could spin the insert loop or grow the xarray without limit. Bound both dimensions with a single enforcement point. Track the number of delegated inodes held by each MDS session in an atomic counter and grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless() to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper is the only place the counter grows, the per-session population can never exceed the cap, so no separate per-session pre-check is needed. The counter is decremented when async create consumes a delegated inode or when an insert fails, incremented when a delegated inode is restored, initialized with the session xarray, and reset when reconnect destroys the xarray. A per-session cap alone still lets one reply spin the insert loop on duplicate ranges without growing the counter, so also cap the aggregate interval length accepted from a single reply. Together these bound both the loop trip count per reply and the xarray population across replies. The cap is a fixed, client-chosen constant rather than a value derived from the MDS. mds_client_prealloc_inos is a userspace MDS configuration option; it is never sent to the kernel client on the wire, and a server-supplied bound could not be trusted for a defensive limit in any case. The constant is set well above that option's documented default of 1000 (a generous multiple), so legitimate refill behavior is unaffected while the CPU and xarray memory a malformed delegation stream can consume stays bounded. Impact: a malicious or compromised Ceph MDS can no longer make a client spin through an unbounded delegated-inode interval or grow one session's delegated-inode xarray without limit. | ||||
| CVE-2026-89647 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | ||||
| CVE-2026-89645 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same failure path drops that count to 0 before mount fails. | ||||
| CVE-2026-89644 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map leak in NOCOW direct I/O write btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an extent map reference that must be dropped on all exit paths. For direct writes into a NOCOW range, btrfs_get_blocks_direct_write() keeps using that extent map and asks btrfs_create_dio_extent() to allocate the ordered extent. If that fails, for example because btrfs_alloc_ordered_extent() fails, the function returns the error without dropping the input extent map. The PREALLOC path avoided this by dropping the input extent map before replacing it with the newly created one. Check the error from btrfs_create_dio_extent() before replacing the map and drop the input extent map on failure. | ||||
| CVE-2026-89642 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range. | ||||
| CVE-2026-89638 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed. | ||||
| CVE-2026-89636 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||