Export limit exceeded: 390865 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390865 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390865 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89637 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. | ||||
| CVE-2026-89636 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | ||||
| CVE-2026-89635 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89631 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it. | ||||
| CVE-2026-89630 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") changed the quantity this bound is measured against. It used to be srv->total_read minus the 4-byte RFC1002 preamble that total_read then included, so it was the SMB message length. The same commit stopped counting the preamble, and the mechanical substitution to srv->total_read - srv->pdu_size left an expression that is identically zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly pdu_length - MID_HEADER_SIZE() more, adding both to total_read. len is therefore 0, the subtraction below it wraps, and no __u32 DataOffset can exceed the result, so the check from commit 097f5863b1a0 ("cifs: read overflow in is_valid_oplock_break()") no longer rejects anything. Use total_read, which is now the message length on its own. | ||||
| CVE-2026-89626 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attributes() creates one sysfs group for each custom sensor field. If sysfs_create_group() fails after some groups have already been created, the function returns the error without removing the previously created groups. Add a local unwind path to remove the groups that were already created. With enable_sensor exposed only after the field attributes are ready, this path can free sensor_inst->fields without leaving enable_sensor able to access pointers into that array. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89620 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: validate report size before copy write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap buffer allocated in quickspi_alloc_report_buf() to the device-descriptor derived max_report_len (a few hundred bytes for a touch controller). It copies the caller-supplied report into that buffer: memcpy(write_buf->content, report_buf, report_buf_len); The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a report larger than max_report_len therefore overflows report_buf with attacker-controlled length and content. Record the report_buf allocation size and reject reports that do not fit before copying, matching the equivalent guard in the intel-quicki2c sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix. write_cmd_to_txdma() writes the output report header ahead of the content in the same buffer, so size the allocation to cover the header as well. That keeps the added bound from rejecting a maximum-sized report. | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89617 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate dirty page table on log replay Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk lcns_follow field. check_rstbl() validates the table bookkeeping but never checks that this array fits in the entry, so a crafted lcns_follow lets the v0->v1 conversion memmove and later replay passes run off the entry. Add check_dp_table() to reject, right after check_rstbl(), any entry larger than its size claims via struct_size() (the same expression used to allocate these entries, so the check is overflow-safe by construction). All consumers can then trust lcns_follow as the real capacity. This covers every page_lcns[] access whose index is bounded by the entry itself (the conversion memmove, the HotFix store via find_dp(), and the self-bounded scan loops). Accesses whose index comes from the log record need a separate bound and are handled in a follow-up patch. | ||||
| CVE-2026-89616 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame() ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target pages and then trusts decompress_lznt()'s return value: unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem, frame_size); if ((ssize_t)unc_size < 0) err = unc_size; else if (!unc_size || unc_size > frame_size) err = -EINVAL; decompress_lznt() stops as soon as the compressed stream is exhausted (e.g. a zero chunk header) and returns the number of bytes it actually wrote, which may be far less than frame_size. The bytes between unc_size and frame_size are never written. The only memset() that follows zeroes the region beyond i_valid; when the frame lies entirely within the file's valid size that memset() does not run, so the gap retains whatever was in the just-vmapped pages. All pages are then marked uptodate and returned to userspace, disclosing uninitialized (recently-freed) kernel page memory. A crafted compressed file whose stream decompresses to only a few bytes leaks the remainder of every frame on a plain read(2), which is enough to recover kernel pointers and defeat KASLR. Zero the [unc_size, frame_size) tail immediately after a successful LZNT decompress so the remainder reads back as zero. | ||||
| CVE-2026-89615 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound page_lcns[] index by the log record The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i, where i runs up to the log record's lcns_follow. That count is checked only against the record's own length, not the target entry, so check_dp_table() (which validates the entry's lcns_follow) does not cover it: the copy_lcns entry may even be freshly allocated after that check, and find_dp() bounds j but not i. A crafted record thus overflows page_lcns[] of an otherwise valid entry. Add dp_range_ok() and reject, before each loop, any record whose run does not fit the entry. These are the only two page_lcns[] accesses indexed by the record rather than the entry, so together with the entry validation every access is now bounded. [almaz.alexandrovich@paragon-software.com: original patch contained changes to the problem already handled, applied partly] | ||||
| CVE-2026-89614 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the free-cluster bitmap scan to the volume vol->lcn_empty_bits_per_page is sized from vol->nr_clusters at mount, but ntfs_cluster_alloc() bounds its scan of that array by the size of $Bitmap. Those are independent on-disk quantities and the mount-time check only rejects a $Bitmap that is too small, so an image whose $Bitmap covers more clusters than the volume has lets the scan index past the array. A run whose LCN lies in that gap takes the allocator straight there, since the caller passes the file's own last LCN as its locality hint. KASAN reports a slab out-of-bounds read when a file on such a volume is extended. Clamp the scan to what that array covers, mirroring the max_index calculation the mount-time scan already uses, and reject a decoded LCN at or beyond nr_clusters in the mapping pairs decoder. Conforming volumes are unaffected. | ||||
| CVE-2026-89613 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid empty mapping pairs Reject an attribute with empty mapping pairs if it has inconsistent highest VCN and size. | ||||
| CVE-2026-89612 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid MFT LCNs from boot sector The NTFS boot sector stores the MFT and MFTMirr locations as unsigned 64-bit LCNs, but parse_ntfs_boot_sector() decoded them into an s64. A crafted high-bit value could therefore become negative and pass the existing upper-bound check. The invalid value then propagated into the MFT zone allocator and could result in an out-of-bounds access to lcn_empty_bits_per_page. | ||||
| CVE-2026-89611 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attribute name when converting between non-sparse and sparse attributes. Converting to sparse also adds the compressed_size field before the name and mapping pairs, requiring eight additional bytes in the attribute record. However, the validator does not check that name_offset is within safe boundaries for these operations or that the additional space is available. A malicious MFT record could set name_offset such that: 1. The name is positioned at the very end of a non-sparse attribute. Converting to sparse would shift the name forward by 8 bytes, writing beyond the attribute boundary. 2. The name overlaps with the mapping pairs, causing corruption during conversion. Add validation to ensure: - For named attributes, name_offset is within valid bounds - Name does not extend beyond the attribute or overlap with mapping pairs - For non-sparse, non-compressed attributes, eight bytes are available after mapping_pairs_offset for the compressed_size field The space check also covers unnamed attributes, for which name_offset = 0 is valid and no name range needs to be checked. | ||||