Export limit exceeded: 395618 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395618 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395618 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90319 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: clear mport->net when rio_add_net() fails rio_alloc_net() stores the newly allocated rio_net in mport->net before rio_scan_alloc_net() registers the device. If rio_add_net() fails, rio_scan_alloc_net() drops the device reference with put_device(), which releases the rio_net through the device release callback. However, mport->net is left pointing at the freed object. A later mport unregister path can then dereference the dangling mport->net pointer and may try to free the same rio_net again. Clear mport->net in the rio_add_net() failure path, matching the cleanup done for the destID table allocation failure path. | ||||
| CVE-2026-90307 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes nothing to srp_process_cred_req() and srp_process_aer_req(), which read fixed-size fields from the receive buffer without checking that those fields were received. The buffer size is max_ti_iu_len, which comes from the login response and is not validated. A target that advertises 8 and then sends an 8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent back, so those bytes reach the target. SRP_AER_REQ behaves the same way and also reads req->lun. The leak is 8 bytes per response. max_ti_iu_len also decides which slab cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and the read is entirely outside it: BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0 Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888104714da0, ffff888104714da8) Without KASAN the returned bytes are whatever is next in the slab. One run returned ".strtab". rsp->data[3] in srp_process_rsp() has the same problem: only resp_data_len is checked before it is read. Drop a request that is shorter than the structure being parsed, and check byte_len before the tsk_mgmt read. | ||||
| CVE-2026-90305 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers created with timer_create(). | ||||
| CVE-2026-90303 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Keep everything unchanged for kernel faults, because the kernel is already in the "oops" state, acquiring a lock may risk a deadlock. | ||||
| CVE-2026-90302 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: synchronize heartbeat callbacks with o2net teardown Patch series "ocfs2: harden heartbeat teardown races". This series fixes two OCFS2 heartbeat/o2net teardown races found by KASAN. This patch (of 2): Heartbeat callbacks stay registered while configfs local-node teardown enters o2net_stop_listening(). A node-down event can still run through o2net_disconnect_node() and o2net_set_nn_state() while teardown is destroying o2net_wq, so the later queue/flush operations can hit a dead workqueue. KASAN has caught this as a slab-use-after-free in __queue_work() with the call chain: KASAN slab-use-after-free in __queue_work+0x56/0xa90 Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __queue_work+0x56/0xa90 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __queue_delayed_work+0x58/0x1e0 queue_delayed_work_on+0xb4/0xc0 o2net_set_nn_state+0x467/0x840 o2net_disconnect_node+0x7b/0xe0 o2net_hb_node_down_cb+0x54/0x60 o2hb_run_event_list+0x236/0x2d0 o2hb_check_slot+0xad4/0xbc0 lock_release+0xc8/0x290 o2hb_check_slot+0x9ea/0xbc0 trace_hardirqs_on+0x18/0x130 o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) __lock_acquire+0x466/0x2260 lockdep_hardirqs_on_prepare+0xea/0x1a0 ktime_get_with_offset+0xe9/0x230 o2hb_thread+0x14e/0x770 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 __switch_to+0x2e9/0x730 ret_from_fork_asm+0x1a/0x30 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x292/0x760 __alloc_workqueue+0x736/0xc60 alloc_workqueue_noprof+0xb1/0x110 o2net_start_listening+0xe5/0x430 o2nm_node_local_store+0x184/0x310 configfs_write_iter+0x18a/0x210 vfs_write+0x469/0x810 ksys_write+0xd2/0x170 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 rcu_core+0x4f4/0x1320 handle_softirqs+0x156/0x660 queue_delayed_work_on o2net_set_nn_state o2net_disconnect_node o2net_hb_node_down_cb o2hb_run_event_list Keep heartbeat callbacks registered so quorum state still tracks node state, but stop them from driving o2net reconnect/disconnect work once local teardown starts. Mark the transport offline before destroying o2net_wq, wait for any in-flight heartbeat callback to finish, and delay bring-up replay until the new local node is published through o2nm_this_node(). The replay also has to stay serialized with heartbeat callback delivery. Otherwise a live-node snapshot can be copied, a real hb_down callback can install -ENOTCONN for a peer, and the stale replay can call o2net_hb_node_up() for that same peer and queue reconnect work even though heartbeat is already down. The buggy scenario involves two paths, with each column showing the order within that path: local-node teardown: heartbeat node-down callback: 1. configfs local-off enters 1. o2hb_run_event_list() invokes o2net_stop_listening(). o2net_hb_node_down_cb(). 2. teardown heads for 2. the callback reaches destroy_workqueue(o2net_wq). o2net_disconnect_node() and o2net_set_nn_state(). 3. teardown destroys and NULLs 3. the callback flushes or queues o2net_wq. work through o2net_wq. | ||||
| CVE-2026-90300 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear buf on error in __bpf_get_task_stack Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM argument and we should initialize the buf on every return path. Adding missing buf memset for __bpf_get_task_stack fail paths. This provides deterministic buffer contents, which is useful when the buffer is used directly as a map key. | ||||
| CVE-2026-90299 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix sleepable check for tracing/lsm prog When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog is allowed to attach to '__x64_'-alike prefix symbols. It is because the verifier does not verify whether the symbol is a kernel function or a bpf prog. That said, a sleepable tracing prog is allowed to attach to a bpf prog target whose name has '__x64_'-alike prefix. For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP prog, and copies buffer from a user pointer with bpf_copy_from_user() helper. After attaching the XDP prog to lo interface, the kernel BUG could be triggered by 'ping -c 1 -W 1 127.0.0.1': [ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324 Fix it by disallowing sleepable prog always when its target btf is not a kernel's btf. | ||||
| CVE-2026-90298 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: tcon: Drop TCON TOP device reference of_find_device_by_node() takes a device reference. Drop it after mux configuration succeeds. | ||||
| CVE-2026-90297 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: crtc: Propagate layer initialization error sun4i_crtc_init() returns plain NULL when layer initialization fails, while all its other error paths return an error pointer. The only caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily continues with tcon->crtc set to NULL. sun4i_rgb_init() and sun4i_lvds_init() then dereference it in drm_crtc_mask(), which oopses. Return the error pointer instead. | ||||
| CVE-2026-90295 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix out-of-bounds write when probed more than once imx6_soc_volt is allocated fresh on every probe, sized to the number of ARM OPPs: imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt), GFP_KERNEL); but it is filled through soc_opp_count, which has static storage and is never reset. A second bind after an unbind keeps indexing from where the first one stopped, and writes past the end of the new array. Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN: BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34 Write of size 4 at addr c5e90480 by task binder/73 imx6q_cpufreq_probe from platform_probe+0x88/0xe4 platform_probe from really_probe+0x108/0x384 bind_store from kernfs_fop_write_iter+0x1b4/0x28c The write lands one u32 past the end of the allocation. soc_opp_count is only read a few lines below the loop that fills it, so it never needed static storage. Make it a local. | ||||
| CVE-2026-90290 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path. | ||||
| CVE-2026-90287 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: sunplus: fix error handling in sp_uphy_init() Fix the error paths of sp_uphy_init() to undo exactly what each stage did: return directly if clk_prepare_enable() fails, release only the clock if reset_control_deassert() fails, and jump to err_reset if update_disc_vol() fails so the clock and reset are not leaked. | ||||
| CVE-2026-90284 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then queues an already-completed fw_priv. Once the request is released, pending_fw_head can retain a pointer to freed memory and the next fallback request can fault while validating the list. Only in-flight fallback requests need suspend or reboot abort handling. If the request is already DONE after device_add(), return success from the fallback path without sending another uevent, waiting again, or queueing it as pending. This preserves the invariant that pending_fw_head contains only active fallback requests. | ||||
| CVE-2026-90283 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path. | ||||
| CVE-2026-90281 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can run before the PHY is ready. This also prevents a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup. | ||||
| CVE-2026-90279 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: round bitmap stripes with sector division raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe widths before converting it to component sectors. That width is chunk_sectors multiplied by the number of data disks, and it is not always a power of two. Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks. The full-stripe width is 3072 sectors. For a one-sector write at array sector 3072, correct rounding gives array range [3072, 6144), which maps to component range [1024, 2048). The old round_down()/round_up() logic instead gives [1024, 4096), which maps to [0, 1024). Use sector_div() based arithmetic so the rounded range is aligned to the actual RAID5 stripe width. The deterministic mapper test now reports the fixed component range as [1024, 2048), while the old mask-based range was [0, 1024). | ||||
| CVE-2026-90276 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk. | ||||
| CVE-2026-90275 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_frozen = 1 on the newly-allocated r1conf and nothing ever clears it, so every I/O to the array stalls permanently once _wait_barrier() sees it stuck at 1. This used to be harmless: level_store() called mddev_resume() right after pers->run(), which called raid1_quiesce(mddev, 0) and cleared array_frozen back to 0 regardless of what raid1_takeover() set. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removed that quiesce(mddev, 0) call, so the pre-set now sticks. setup_conf() already zero-initializes the new r1conf via kzalloc, so just don't set array_frozen here. Same class of bug as commit 892da88d1cd9 ("md/raid10: fix a 'conf->barrier' leakage in raid10_takeover()"), also triggered by b39f35ebe86d. | ||||
| CVE-2026-90274 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup. | ||||
| CVE-2026-90273 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths. | ||||