Export limit exceeded: 15357 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15357 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80584 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from kzalloc(), which the existing NULL check does not catch. Reject buffers smaller than udata_offset before allocating, so the callback subtraction can no longer underflow. | ||||
| CVE-2026-80537 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-79189 | 1 Google | 1 Chrome | 2026-08-26 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-77118 | 4 Debian, Fedora Project, Fedoraproject and 1 more | 5 Debian Linux, Graphicsmagick, Graphicsmagick and 2 more | 2026-08-26 | N/A |
| A heap out-of-bounds write exists in the Photo CD (PCD) decoder of GraphicsMagick. In DecodeImage() (coders/pcd.c), the Huffman delta loop advances its output pointer with q++ after every decoded delta and never checks it against the end of the heap-allocated luma/chroma plane buffers. The pointer is repositioned only when a sync marker introduces a new plane/row; between sync markers the run length is bounded solely by the input. A crafted PCD file that positions the pointer near the end of a plane and then supplies a long run of deltas with no intervening sync therefore walks the pointer past the end of the allocation and writes through it. Processing an untrusted PCD file — for example with gm convert or gm identify, or through any application linked against libGraphicsMagick — can corrupt heap memory beyond the buffers. | ||||
| CVE-2026-18289 | 1 Originlab | 1 Originpro | 2026-08-26 | N/A |
| OriginLab OriginPro OPJ File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of OPJ files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29332. | ||||
| CVE-2026-18269 | 1 Kenwood | 1 Dnr1007xr | 2026-08-26 | N/A |
| Kenwood DNR1007XR tchdr_bytestream_read Out-Of-Bounds Write Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Kenwood DNR1007XR devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tchdr_bytestream_read function. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-28980. | ||||
| CVE-2026-79048 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-08-26 | 8.8 High |
| Out of bounds write in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-79043 | 1 Google | 1 Chrome | 2026-08-26 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-79019 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-08-26 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2022-0995 | 3 Fedoraproject, Linux, Netapp | 24 Fedora, Linux Kernel, H300e and 21 more | 2026-08-26 | 7.8 High |
| An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system. | ||||
| CVE-2026-13214 | 1 Zephyrproject | 1 Zephyr | 2026-08-26 | 9.8 Critical |
| The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg(). When handling a GetConfiguration request from the central system, the handler copied the attacker-controlled JSON "key" string into the caller's fixed 50-byte stack buffer (skey[CISTR50], declared in subsys/net/lib/ocpp/ocpp.c) using an unbounded strcpy(). The parsed key value points directly into the receive buffer, so its length is bounded only by the message size (CONFIG_OCPP_RECV_BUFFER_SIZE, default 2048). The GetConfiguration message is delivered over the WebSocket connection that the charge point opens to its configured central system. The reader thread ocpp_wsreader() reads the message into ui->recv_buf and dispatches it to parse_getconfig_msg() via the PDU function table. An attacker who controls the central system endpoint, or a man-in-the-middle on an unencrypted connection, can send a GetConfiguration request whose "key" field exceeds 50 bytes and overflow the reader thread's stack with attacker-chosen bytes. The consequence is a remotely triggerable stack smash on the OCPP reader thread: at minimum a denial of service, and plausibly remote code execution depending on build-time hardening such as stack canaries and MPU configuration. The fix replaces the strcpy() with a bounded strncpy(key, payload.key[0], CISTR50 - 1) followed by explicit NUL termination, matching the bounded copies already used by the sibling handlers. | ||||
| CVE-2026-13215 | 1 Zephyrproject | 1 Zephyr | 2026-08-26 | 6.8 Medium |
| The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer. | ||||
| CVE-2026-68515 | 2026-08-26 | 7.1 High | ||
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, exrmultiview can write past a heap allocation when it combines two attacker-supplied, individually valid scanline EXR files whose union dataWindow is not aligned to one view's channel subsampling. The utility allocates sampled channel storage using a truncated union_width / xSampling, then reads the sampled input through a Slice based on the misaligned union window, producing a heap out-of-bounds write. The trigger is normal public-tool processing, such as exrmultiview left A.exr right B.exr out.exr with crafted but valid inputs, so this is not solely an API or caller-precondition issue. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. | ||||
| CVE-2026-19783 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-26 | 6.7 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause kernel memory corruption due to insufficient validation. A crafted filesystem image can trigger an out-of-bounds kernel-stack write during directory reads, causing a system crash or potentially enabling privilege escalation. | ||||
| CVE-2026-56392 | 1 Gnu | 1 Coreutils | 2026-08-26 | 6.1 Medium |
| GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer. When processing crafted input, subsequent writes exceed the allocated memory, leading to an out‑of‑bounds heap write. When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout. This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d | ||||
| CVE-2026-42944 | 1 Nlnetlabs | 1 Unbound | 2026-08-26 | 7.5 High |
| NLnet Labs Unbound 1.14.0 up to and including version 1.25.0 has a vulnerability that results in heap overflow when encoding multiple NSID and/or DNS Cookie EDNS and/or EDNS Padding options in the reply packet. The relevant options ('nsid', 'answer-cookie', 'pad-responses' (default)) need to be enabled for the vulnerability to be exploited. An adversary who can query Unbound can exploit the vulnerability by attaching multiple NSID and/or DNS Cookie EDNS and/or EDNS Padding options to the query. A flaw in the size calculation of the EDNS field truncates the correct value which allows the encoder to overflow the available space when writing. Those two combined lead to a heap overflow write of Unbound controlled data and eventually a crash. Unbound 1.25.1 contains a patch with a fix to de-duplicate the EDNS options and a fix to prevent truncation of the EDNS field size calculation. | ||||
| CVE-2026-68514 | 2026-08-26 | 5.5 Medium | ||
| OpenEXR is the reference implementation and specification for the EXR image file format, widely used in the motion picture industry. In versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13, the PyOpenEXR Python bindings contain a heap out-of-bounds write triggered when reading a crafted deep scanline EXR file. When a deep file declares a literal channel named left alongside layer-prefixed RGB channels left.R, left.G, and left.B, the wrapper processes the literal left channel first and allocates a scalar deep sample array for it, then reuses that same array as the coalesced destination for the prefixed RGB group. The deep reader registers sample slices with an RGB stride (three lanes) into storage that was allocated with scalar shape, so decoding the deep samples writes past the allocation. Opening such a file through the default public Python API, OpenEXR.File(path), causes a heap buffer overflow during normal deep sample decode, leading to memory corruption and a crash. This issue is fixed in versions 3.3.13 and 3.4.14. | ||||
| CVE-2026-59250 | 1 Erlang | 2 Erlang/otp, Erlang\/otp | 2026-08-25 | N/A |
| Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name. When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service. The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}. This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups. This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, from 4.8 before 4.8.3.1, and from 4.9 before 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown. | ||||
| CVE-2026-18821 | 1 Ibm | 54 Power System E1050 \(9043-mrx\), Power System E1050 \(9043-mrx\) Firmware, Power System E1080 \(9080-hex\) and 51 more | 2026-08-25 | 7.5 High |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact. | ||||
| CVE-2026-17100 | 1 Ibm | 60 Power Firmware, Power Hardware Management Console \(7063-cr2\), Power Hardware Management Console \(7063-cr2\) Firmware and 57 more | 2026-08-25 | 8.2 High |
| Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1, and OP940.00 - OP940.81 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the BMC/FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system. | ||||