Export limit exceeded: 416108 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416108 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99186 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx() Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made for_each_insn_prefix() declare its own loop counter named idx. get_seg_reg_override_idx() keeps its result in a local of the same name, so the assignments in the loop body now write the loop counter: - the function always returns INAT_SEG_REG_DEFAULT, so FS and GS overrides are ignored; - a CS override sets the counter to INAT_SEG_REG_CS (2), the increment makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again, so the loop never terminates. The UMIP emulation reaches this from the #GP handler for user space: an SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task spinning in the kernel, never returning to user space, with a SIGKILL that is never delivered. Any user can thus tie up CPUs until reboot. With an FS or GS prefix, the emulated result is written to the wrong address. Rename the internal macro iterator variable. [ Lukas' original patch renamed the use site, I changed it to rename the iterator in the macro instead, but left Lukas' commit message and authorship - Linus ] | ||||
| CVE-2026-99188 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac1000: clear the RGMII status interrupt Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again, and the pending status storms the line: dwmac_dma_interrupt: unexpected status 04000000 A register dump at the first message on ODROID-HC4 showed it: core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d When the resume thread runs on the CPU that takes the MAC interrupt, the storm starves it: a soft lockup, then a watchdog reset or a hang. Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not masked, as the driver did before 2e2c878a3141; the read clears it. Wake-on-LAN resume from s2idle with the resume thread and the MAC interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of 3 resumes without a fix and in 0 of 10 with this patch; it ran with an out-of-tree dwmac-rk change that keeps the GMAC powered across suspend. ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. | ||||
| CVE-2026-99189 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irq_chained_handler() is called before the IRQ domain, the generic IRQ chip, and the port list entry are set up. If an interrupt arrives in that window: - mx3_gpio_irq_handler() calls generic_handle_domain_irq() with port->domain still NULL. - mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not been added to the list yet. Additionally, if any of the subsequent probe steps (gpio_generic_chip_init(), devm_gpiochip_add_data(), irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error paths never unregister the chained handler, leaving a dangling handler that points at freed memory. Move the handler installation after all its dependencies are ready and after list_add_tail(), so the handler is never live while the data structures it touches are incomplete, and is never installed if probe fails. | ||||
| CVE-2026-99190 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths A drive-by review by Sashiko reports that, after a failed call to gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly, bypassing the freeing of possibly alloced bitmaps, potentially leaking memory. It is an unlikely error path, but is possible. Defer the return code check until after the bitmap_free() block. | ||||
| CVE-2026-99191 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. | ||||
| CVE-2026-99192 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. | ||||
| CVE-2026-99196 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: au1000: move setting of netops to fix crash au1000_probe() calls au1000_mii_probe(), which connects the PHY, before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99198 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: actions: Move setting of netops to fix crash owl_emac_probe() calls owl_emac_phy_init(), which connects the PHY, before netdev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99199 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: hip04_eth: Move setting of netops to fix crash hip04_mac_probe() calls of_phy_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99204 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: Protect the recovery list during debugfs reads Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] </TASK> Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.] | ||||
| CVE-2026-99205 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Call wakeup_preempt() for queued tasks during class change Paul reported recent RCU changes exposed a lost resched where CPU idles with a rcutorture thread waiting while being completely runnable. Dumping the rq state at the time of idling with runnable tasks showed the following: rq->next_class = &fair_sched_class rq->nr_running = 1 rq->cfs.h_nr_queued = 0 rq->rt.rt_nr_running = 1 Although the waiting task was an RT task, "rq->next_class" did not point to rt_sched_class and was stuck at the lower priority fair_sched_class. Inspecting sched_change_end() revealed the following race with __sched_setscheduler() for queued, but non-running tasks: CPU0 CPU1 ==== ==== __schedule() /* * rq->donor is a fair task that blocks. * rq->next_class = &fair_sched_class */ rq_lock(rq0) pick_next_task() /* nr_running = 0 */ pick_task_fair() sched_balance_newidle() raw_spin_rq_unlock(rq0) rq_lock(rq0) activate_task(rq0, p) /* p is a fair task */ rq0->nr_running++; rq0->cfs.h_nr_queued++; wakeup_preempt(rq, p) rq->next_class = &fair_sched_class resched_curr() rq_unlock(rq0) __sched_setscheduler(p) /* p is moved to SCHED_RR */ task_rq_lock(p) sched_change_begin() rq0->cfs.h_nr_queued--; rq0->rt.rt_nr_running++; sched_change_end() /* * p->on_rq = 1 (ctx->queued) * but p is not rq->donor * (!ctx->running) hence * resched_curr() is and * rq->next_class upgrade is * skipped. */ task_rq_unlock() raw_spin_rq_lock(rq0) /* * rq->nr_running = 1 * rq->cfs.h_nr_queued = 0 * rq->rt.rt_nr_running = 1 * rq->next_class = &fair_sched_class */ if (rq->cfs.h_nr_queued && ...) /* Above is false */ if (rq_modified_above(this_rq, &fair_sched_class)) /* Also false since rq->next_class is still fair */ /* * sched_balance_newidle() is considered to * have failed to pull any fair tasks and no * other wakeups were detected. */ return NULL; /* pick_task_fair() */ pick_task_idle() return rq->idle; next = rq->idle; /* Preemption indicators are lost */ clear_tsk_need_resched(prev); clear_preempt_need_resched(); rq->curr = rq->idle; !!! rq->idle switches in with rq->running == 1 but !need_resched() !!! In simple words, enqueue, followed by a class change of the newly queued task goes unnoticed in rq->next_class indicator and sched_balance_newidle() sees no fair task, nor any higher priority task enqueued. The above sequence will lead to CPU idling with a runnable task on the CPU. Call wakeup_preempt() for ctx->queued cases in sched_change_end() to re-evaluate rq->next_class after class change (ENQUEUE_CLASS) and set the NEED_RESCHED indicator accordingly. Newidle balance will correctly see an enqueue of a higher priority t ---truncated--- | ||||
| CVE-2026-99207 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() takes dev->delayed_cmd_lock with a plain spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled while the lock is held. Every other acquisition of that lock uses spin_lock_irqsave(): target_handle_task_attr() and transport_complete_ordered_sync() in target_core_transport.c, and target_non_ordered_release() in target_core_device.c. That was safe while every caller of transport_complete_task_attr() ran in process context: target_complete_ok_work() from target_completion_wq, transport_complete_qf() from dev->qf_work_queue, and transport_generic_request_failure() from the submit and execute paths. Since commit 06933066d88a ("scsi: target: Add support for completing commands from backend context") that is no longer true. With complete_type=1 on a fabric that sets direct_compl_supp, target_complete() runs target_complete_ok_work() inline in the backend's completion context, which target_complete_cmd_with_sense() documents as "May be called from interrupt context". For iblock that is the bio end_io. target_complete_ok_work() starts with transport_complete_task_attr(), which takes delayed_cmd_lock in two ways: - Every ORDERED command is put on dev->delayed_cmd_list by target_handle_task_attr() and dispatched from there by target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its completion therefore goes through transport_complete_ordered_sync(). - A SIMPLE command that completes while an ORDERED command is pending drops the last reference to the killed dev->non_ordered, and percpu_ref_put() then runs target_non_ordered_release() in the completing context. Both take the lock and, if commands are waiting, call schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq, i.e. on the CPU that took the completion. Further completions for the same queue are typically delivered there too, so one arriving while the work holds the lock spins on it forever. Reaching this needs complete_type=1, which is not the default (vhost-scsi, the only fabric with direct_compl_supp, defaults to TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt context, and ORDERED commands from the initiator. Linux virtio_scsi guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path; any guest that uses the ORDERED task attribute, which vhost-scsi accepts, does. target_do_delayed_work() is a work item and always runs in process context, so spin_lock_irq() is sufficient. Found by inspection; no runtime report. A single ORDERED command goes through both acquisitions, so with CONFIG_PROVE_LOCKING the first one completed through direct completion should produce an inconsistent lock state report on delayed_cmd_lock (hardirq or softirq, depending on where the backend completes). | ||||
| CVE-2026-99208 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331) | ||||
| CVE-2026-99210 | 1 Linux | 1 Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: clear rdev on device init failure rocket_probe() stores the return value from rocket_device_init() in the file-scoped rdev pointer before checking whether it is an error pointer. If rocket_device_init() fails, rdev is left as an ERR_PTR. The rdev pointer is also used as the marker for whether the shared rocket device has already been initialized. A later core probe can therefore see a non-NULL rdev, skip rocket_device_init(), and dereference the error pointer when reading rdev->num_cores. Save the error code and clear rdev before returning from the rocket_device_init() failure path. | ||||
| CVE-2026-103313 | 2026-10-28 | 5.3 Medium | ||
| The BitPay Gateway for WooCommerce WordPress plugin through 4.1.3 does not bind the payment provider's transaction confirmation to the order it completes, nor verify the confirmed amount, allowing an unauthenticated attacker who holds a single genuine low-value transaction to mark arbitrary higher-value orders as paid. | ||||
| CVE-2026-99105 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick. | ||||
| CVE-2026-99107 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize(). | ||||
| CVE-2026-99110 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). | ||||
| CVE-2026-118039 | 2026-10-28 | 7.5 High | ||
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, an XML external entity reference vulnerability in SVG image processing allows an unauthenticated attacker to read local files on the server via a crafted SVG image with a nested embedded SVG, when the image is processed or exported to PDF. | ||||
| CVE-2026-118038 | 2026-10-28 | 7.1 High | ||
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, a path traversal vulnerability in the Convert and Merge AI agent tools allows an authenticated attacker with low privileges who can supply tool arguments to read files outside the configured output directory, and to overwrite such files where they are writable, via relative file paths that resolve against the process current working directory. | ||||