Export limit exceeded: 395734 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395734 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90239 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence. If one of them fails, it jumps to error_no_memory and returns -ENOMEM without releasing the pools that were already allocated, leaking them. Release the already-allocated pools before returning. isp4if_gpu_mem_free() is a no-op on pools that were not allocated, so calling isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that succeeded. isp4if_gpu_mem_free() previously logged an error for a NULL entry, which is a normal case during partial-allocation cleanup, so make it silent. | ||||
| CVE-2026-90311 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thermal: hwmon: Remove hwmon class device along with its parent The current code creates one hwmon device per thermal zone type and that device is registered under the first thermal zone of the given type. That turns out to be problematic when the thermal zone holding the hwmon device is removed. For example, say that there are two ACPI thermal zones on a system /sys/devices/virtual/thermal/thermal_zone0/ /sys/devices/virtual/thermal/thermal_zone1/ The current code registers a hwmon class device for thermal_zone0 only: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/ because the type is "acpitz" for both of them, but it adds a sysfs attribute that belongs to thermal_zone1 under it: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input There is also /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input which belongs to thermal_zone0. When thermal_zone0 is removed, say because the ACPI thermal driver is unbound from the underlying platform device, thermal_remove_hwmon_sysfs() skips the removal of hwmon0 because of the temp2_input attribute belonging to thermal_zone1 which effectively prevents thermal_zone0 removal from making progress. Address this by making thermal_remove_hwmon_sysfs() remove the entire hwmon class device interface for the given thermal zone type when the thermal zone device holding it is removed. To prevent races with thermal_add_hwmon_sysfs() that may interfere with this, carry out the entire addition and removal of hwmon sysfs interfaces for thermal zones under thermal_hwmon_list_lock. Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to the current kernel coding style to align with the new "unlock" label. | ||||
| CVE-2026-90246 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is false, so the guard is bypassed and the inner loop reads sets.table[2] -- one element past a two element allocation The walk continues until an out-of-bounds value happens to be >= hdrs.size or the access faults, so a crafted policy yields an out-of-bounds read on the policy load path (aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags -> verify_tags). unpack_tags() runs before the perms and DFA tables are unpacked, so no other table needs to be well formed to reach it. Policy load is gated by aa_may_manage_policy(), which checks CAP_MAC_ADMIN relative to the subject's own user namespace rather than the init user namespace, so with the default unprivileged_userns_apparmor_policy=1 the path is reachable from an unprivileged task in a matched-level nested namespace, not only by a globally privileged one. Perform the addition in u64 so that it cannot wrap, restoring the intended i + cnt < sets.size guarantee. | ||||
| CVE-2026-90250 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix storage null-ptr-deref after replacing prog Syzkaller reported a storage null-ptr-deref issue after replacing prog. This occurs in the following scenario: 1. prog A, an empty prog, is attached to a cgrp. 2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the bpf_get_local_storage helper. 3. link_update is called to replace prog A with prog B. The reason is that __cgroup_bpf_replace fails to alloc and assign the required cgrp storage for the incoming replacement prog. Consequently, the new prog inherits an uninit storage, leading to null-ptr-deref panic when kick the new prog. Fix this by rejecting a link update if new_prog's cgroup storage is incompatible with link->prog. | ||||
| CVE-2026-90251 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too short for the prefix it declares. Verified with an emulated controller over /dev/vhci on a KASAN kernel, with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk and btrtl do unconditionally. A reply of exactly 11 bytes declaring evt_prefix_len = 255 reaches kmemdup and copies 255 bytes ("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since the reply ends at the fixed part, all 255 come from past the end of the response. No KASAN report is produced, as expected from the allocation slack described above. With this patch the response is rejected with "MSFT event prefix length mismatch" and msft->evt_prefix is left unset. | ||||
| CVE-2026-90252 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the HCI command when it is cancelled mgmt_hci_cmd_sync() queues the pending command with a NULL destroy callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback. The now-empty done label is replaced by a direct return. | ||||
| CVE-2026-90253 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the mesh send cancel command when it is cancelled mesh_send_cancel() queues the pending command with a NULL destroy callback, so it is only freed if send_cancel() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback. | ||||
| CVE-2026-90254 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths adv_timeout_expire() hands a kmalloc()ed instance byte to hci_cmd_sync_queue() with a NULL destroy callback, and only adv_timeout_expire_sync() frees it. That leaks on two paths: - the return value is not checked, and hci_cmd_sync_queue() does not take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM); - a cancelled entry is not released, as _hci_cmd_sync_cancel_entry() does not free entry->data when there is no destroy callback. hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Free the buffer from a destroy callback, and in the caller when the entry could not be queued at all. | ||||
| CVE-2026-90258 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: airoha: add missed IRQ resource helpers Without hooking .irq_request_resources, gpiolib cannot set GPIOD_FLAG_USED_AS_IRQ. This breaks pin direction locking and can allow userspace or another driver to reconfigure an active IRQ pin as an output | ||||
| CVE-2026-90261 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: flush active metadata block group at btree_writepages() start btree_writepages() writes the btree inode's dirty metadata in ascending logical address order. On a zoned filesystem only one metadata and one system block group is active for writing at a time, and check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the active block group as writeback moves from one block group to the next. If the active block group sits at a higher logical address than another block group that also holds dirty metadata, the ascending walk reaches the lower one first and, to write it, has to finish the active block group and activate the lower one. It cannot finish a block group that still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit) writeback it deliberately refuses to wait for that IO under fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot issue the submission itself either, so it gives up: btrfs_check_meta_write_pointer() returns -EAGAIN, which btrfs_write_and_wait_transaction() treats as fatal and aborts the transaction, forcing the filesystem read-only. This happens intermittently under metadata-heavy relocation (e.g. fstests btrfs/187). Flush the active metadata and system block groups at the start of btree_writepages(), under the fs_info->zoned_meta_io_lock it already holds, so they have no unsent IO left and the later pivot can finish them and make forward progress. | ||||
| CVE-2026-90192 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: handle NULL data in send_data callback mailbox_clear_channel() calls mbox_send_message() with NULL data to notify the remote side that the RX channel has been cleared. qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer, causing a NULL pointer dereference kernel panic when invoked from this path under PREEMPT_RT. Add an explicit NULL check and return early without writing to the TX register, which is the correct behaviour for a channel-clear notification. | ||||
| CVE-2026-90195 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc args. However, the RV64 JIT currently does not perform sign-extension for such kfunc args. Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register liveness analysis"), state pruning could potentially omit zero-extension of 32-bit subregisters, which inadvertently masked the above issue by making the args appear as if they had been properly sign-extended. After that commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4 selftest to fail. Fix this by extending the existing sign-extension logic to handle signed 1-byte and 2-byte kfunc args as well. | ||||
| CVE-2026-90197 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: haptic: don't write an uninitialized value to unhandled usages fill_effect_buf() initializes value only for the four haptic usages handled by its switch, but writes it to field->value[] for every usage. An unhandled usage can therefore receive either an uninitialized value or one left over from the previous usage. hid_output_report() then serializes that value into the effect's report buffer. Skip unhandled usages instead. This also matches switch_mode(), which only updates fields it recognizes. Found with Clang's -Wconditional-uninitialized. | ||||
| CVE-2026-90198 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix use-after-free in snd_card_do_free() A use-after-free was detected in snd_card_do_free() when a sound card managed by devres is unbound while a user-space application still holds an open file descriptor. For managed cards, the memory is allocated using devres_alloc(), and its release function is set to __snd_card_release(), which calls snd_card_free(). When the device is unbound, the unbind thread calls snd_card_free(), which drops a reference to the card's device. If the user thread still has an open file descriptor, the reference count does not reach zero, and the unbind thread blocks on wait_for_completion(&released). When the user thread closes the file descriptor, it drops the final reference, invoking the device release callback release_card_device(), which calls snd_card_do_free(). snd_card_do_free() performs cleanup and calls complete(card->release_completion). This wakes up the unbind thread, which returns from snd_card_free() and __snd_card_release(). The devres core then immediately frees the memory block containing the snd_card structure. Meanwhile, the user thread continues execution in snd_card_do_free() and evaluates `if (!card->managed)`. It reads the `managed` boolean from the snd_card structure that was just freed by the unbind thread, triggering a KASAN use-after-free. Fix this by caching the value of card->managed in a local variable before calling complete(). This ensures that the card pointer is not dereferenced after the unbind thread has been woken up and potentially freed the card. BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604 [inline] BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0 sound/core/init.c:153 Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description+0x55/0x1e0 mm/kasan/report.c:378 print_report+0x58/0x70 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 snd_card_do_free sound/core/init.c:604 [inline] release_card_device+0x1ab/0x1b0 sound/core/init.c:153 device_release+0xc4/0x1f0 drivers/base/core.c:-1 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x222/0x550 lib/kobject.c:737 snd_card_file_remove+0x331/0x390 sound/core/init.c:1125 snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986 __fput+0x418/0xa50 fs/file_table.c:512 fput_close_sync+0x11f/0x240 fs/file_table.c:617 __do_sys_close fs/open.c:1511 [inline] __se_sys_close fs/open.c:1496 [inline] __x64_sys_close+0x7e/0x110 fs/open.c:1496 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> | ||||
| CVE-2026-90206 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. | ||||
| CVE-2026-90208 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type Samsung PWM timer might be used as a clock source on some legacy systems. When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a sleeping lock (mutex-based), which must not be used in atomic context such as hard interrupt handlers. Switch the samsung_pwm_lock to the raw_spinlock, which remains a true non-sleeping spinlock even under PREEMPT_RT. | ||||
| CVE-2026-90262 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() can find a folio in the mapping that is not uptodate. After taking the folio lock, the current code treats that state as a read error and returns -EIO. That can make a previous transient read failure sticky. If the failed read left a not-uptodate folio in the mapping, later callers find that folio and fail instead of retrying the read. Keep the existing page-cache insertion and locking order, but retry the Merkle item read when a not-uptodate folio is found in the mapping. Also unlock the folio when read_key_bytes() fails so that a later caller can lock it and retry the read. | ||||
| CVE-2026-90263 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if root is readonly while setting security xattr"). Always check if the root is read-only before performing the set acl operation. | ||||
| CVE-2026-92970 | 1 Hubzero | 1 Hubzero-cms | 2026-09-19 | 8.8 High |
| HUBzero CMS through 2.2.32 contains a path traversal vulnerability in project file upload handlers that allows authenticated project members to write arbitrary files outside the project repository. Attackers can supply traversal sequences in upload parameters to write files to attacker-chosen paths with web server privileges, potentially enabling code execution. | ||||
| CVE-2026-92944 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 9.8 Critical |
| vm2 versions 3.10.2 through 3.11.6 contain a sandbox escape vulnerability on Node.js 26 where Promise.prototype.finally() bypasses vm2's wrapper protections due to a stale PromiseThenLookupChain protector in V8 14.6. Attackers can exploit this by creating an async function that returns a Promise with an attacker-controlled constructor Symbol.species, allowing them to reach the host Function constructor and process object for arbitrary code execution. | ||||