| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Potential privilege escalation vulnerability in Revenera InstallShield versions 2022 R2 and 2021 R2 due to adding InstallScript custom action to a Basic MSI or InstallScript MSI project extracting few binaries to a predefined writable folder during installation time. The standard user account has write access to these files and folders, hence replacing them during installation time can lead to a DLL hijacking vulnerability. |
| Web services managed by Edito CMS (Content Management System) in versions from 3.5 through 3.25 leak sensitive data as they allow downloading configuration files by an unauthenticated user.
The issue in versions 3.5 - 3.25 was removed in releases which dates from 10th of January 2014. Higher versions were never affected. |
| CWE-552: Files or Directories Accessible to External Parties vulnerability over https exists that could leak
information and potential privilege escalation following man in the middle attack. |
| Open OnDemand is an open-source HPC portal. Prior to versions 4.0.8 and 3.1.16, Open OnDemand packages create world writable locations in the GEM_PATH. Open OnDemand versions 4.0.8 and 3.1.16 have been patched for this vulnerability. |
| Local File Inclusion vulnerability in Ready's attachment upload panel allows low privileged user to provide link to a local file using the file:// protocol thus allowing the attacker to read content of the file. This vulnerability can be use to read content of system files. |
| due to insufficient sanitazation in Vega’s `convert()` function when `safeMode` is enabled and the spec variable is an array. An attacker can craft a malicious Vega diagram specification that will allow them to send requests to any URL, including local file system paths, leading to exposure of sensitive information. |
| Rapid7 Velociraptor MSI Installer versions below 0.73.3 suffer from a vulnerability whereby it creates the installation directory with WRITE_DACL permission to the BUILTIN\\Users group. This allows local users who are not administrators to grant themselves the Full Control permission on Velociraptor's files. By modifying Velociraptor's files, local users can subvert the binary and cause the Velociraptor service to execute arbitrary code as the SYSTEM user, or to replace the Velociraptor binary completely. This issue is fixed in version 0.73.3. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.80), SIPROTEC 5 6MD85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 6MD86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 6MD89 (CP300) (All versions >= V7.80 < V9.68), SIPROTEC 5 6MU85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7KE85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SA82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.80), SIPROTEC 5 7SA86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SA87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SD82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.80), SIPROTEC 5 7SD86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SD87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SJ81 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.80), SIPROTEC 5 7SJ82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.80), SIPROTEC 5 7SJ85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SJ86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SK82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SK82 (CP150) (All versions < V9.80), SIPROTEC 5 7SK85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SL82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.80), SIPROTEC 5 7SL86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SL87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SS85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7ST85 (CP300) (All versions < V9.68), SIPROTEC 5 7ST86 (CP300) (All versions < V9.80), SIPROTEC 5 7SX82 (CP150) (All versions < V9.80), SIPROTEC 5 7SX85 (CP300) (All versions < V9.80), SIPROTEC 5 7SY82 (CP150) (All versions < V9.80), SIPROTEC 5 7UM85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.80), SIPROTEC 5 7UT85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VE85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VK87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VU85 (CP300) (All versions < V9.80), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.80). Affected devices do not properly limit the path accessible via their webserver. This could allow an authenticated remote attacker to read arbitrary files from the filesystem of affected devices. |
| wolfictl is a command line tool for working with Wolfi. A git authentication issue in versions prior to 0.16.10 allows a local user’s GitHub token to be sent to remote servers other than `github.com`. Most git-dependent functionality in wolfictl relies on its own `git` package, which contains centralized logic for implementing interactions with git repositories. Some of this functionality requires authentication in order to access private repositories. A central function `GetGitAuth` looks for a GitHub token in the environment variable `GITHUB_TOKEN` and returns it as an HTTP basic auth object to be used with the `github.com/go-git/go-git/v5` library. Most callers (direct or indirect) of `GetGitAuth` use the token to authenticate to github.com only; however, in some cases callers were passing this authentication without checking that the remote git repository was hosted on github.com. This behavior has existed in one form or another since commit 0d06e1578300327c212dda26a5ab31d09352b9d0 - committed January 25, 2023. This impacts anyone who ran the `wolfictl check update` commands with a Melange configuration that included a `git-checkout` directive step that referenced a git repository not hosted on github.com. This also impacts anyone who ran `wolfictl update <url>` with a remote URL outside of github.com. Additionally, these subcommands must have run with the `GITHUB_TOKEN` environment variable set to a valid GitHub token. Users should upgrade to version 0.16.10 to receive a patch. |
| cgi-bin/fdmcgiwebv2.cgi on Swissphone DiCal-RED 4009 devices allows an authenticated attacker to gain access to arbitrary files on the device's file system. |
| The CGI script <redacted>.sh can be used to download any file on the filesystem.
This issue affects Iocharger firmware for AC model chargers beforeversion 24120701.
Likelihood: High, but credentials required.
Impact: Critical – The script can be used to download any file on the filesystem, including sensitive files such as /etc/shadow, the CGI script source code or binaries and configuration files.
CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N/S:P/AU:Y
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The confidentiality of all files of the devicd can be compromised (VC:H/VI:N/VA:N). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, this attack in isolation does not have a safety impact. The attack can be automated (AU:Y). |
| A vulnerability exists in Sitecore Experience Manager (XM), Experience Platform (XP), Experience Commerce (XC), and Managed Cloud that could allow an unauthenticated attacker to read arbitrary files. This vulnerability affects all Experience Platform topologies (XM, XP, XC) from 8.0 Initial Release through 10.4 Initial Release and later. This issue affects Content Management (CM) and standalone instances. PaaS and containerized solutions are also affected. |
| A security flaw has been discovered in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 4.10.24.3. Affected by this issue is some unknown functionality of the file /ExportFiles/. The manipulation results in files or directories accessible. The attack may be launched remotely. This attack is characterized by high complexity. The exploitation is known to be difficult. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in code-projects Simple Food Ordering System up to 1.0. Affected by this vulnerability is an unknown functionality of the file /food/sql/food.sql of the component Database Backup Handler. The manipulation leads to files or directories accessible. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. It is recommended to change the configuration settings. |
| The Shariff Wrapper plugin for WordPress is vulnerable to Local File Inclusion in versions up to, and including, 4.6.13 via the shariff3uu_fetch_sharecounts function. This allows unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The Content Blocks (Custom Post Widget) plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 3.3.0 via the plugin's 'content_block' shortcode. This makes it possible for authenticated attackers, with contributor-level access and above, to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The HTML filter and csv-file search plugin for WordPress is vulnerable to Local File Inclusion in versions up to, and including, 2.7 via the 'src' attribute of the 'csvsearch' shortcode. This allows authenticated attackers, with contributor-level permissions and above, to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The PHP to Page plugin for WordPress is vulnerable Local File Inclusion to Remote Code Execution in versions up to, and including, 0.3 via the 'php-to-page' shortcode. This allows authenticated attackers with subscriber-level permissions or above, to include local file and potentially execute code on the server. While subscribers may need to poison log files or otherwise get a file installed in order to achieve remote code execution, author and above users can upload files by default and achieve remote code execution easily. |
| The Backup Migration plugin for WordPress is vulnerable to unauthorized access of data due to insufficient path and file validation on the BMI_BACKUP case of the handle_downloading function in all versions up to, and including, 1.3.6. This makes it possible for unauthenticated attackers to download back-up files which can contain sensitive information such as user passwords, PII, database credentials, and much more. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.4, the FHIR Validator HTTP service exposes an unauthenticated "/loadIG" endpoint that makes outbound HTTP requests to attacker-controlled URLs. Combined with a startsWith() URL prefix matching flaw in the credential provider (ManagedWebAccessUtils.getServer()), an attacker can steal authentication tokens (Bearer, Basic, API keys) configured for legitimate FHIR servers by registering a domain that prefix-matches a configured server URL. This issue has been patched in version 6.9.4. |
