| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Topluyo is a social networking platform. A vulnerability exists in Topluyo Desktop for Linux prior to version 2026.9.2410 where user-controlled URLs are unsafely processed, leading to OS Command Injection via the `openExternalLinks()` routine in `utils.js`. An attacker who controls a target URL can execute arbitrary operating system commands with the privileges of the user running the application upon opening the link. Version 2026.9.2410 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Prevent XID null dereference
The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40
to signal XID validation error. If peer XID is NULL or r/w channel
pairing mismatch happens, grp->saved_xid2 is never initialized. An
attempt to set the flag in such case leads to NULL dereference.
Fix this by using the always available priv->xid->xid2_flag2 instead of
grp->saved_xid2->xid2_flag2 for validation errors. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix infinite loop on discard with large tag size
When integrity_metadata handles a discard, it fills a buffer with
DISCARD_FILLER and writes it over the tags, max_blocks blocks at a
time. If the kmalloc fails, the buffer is the on-stack array
checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the
tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size
is never decremented and the loop never terminates.
Fix this by using sizeof(checksums_onstack) as max_size. The array has
MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a
crash with unusually large tag size"), so max_blocks is at least 1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the task named by a management response
__iscsi_complete_pdu() fetches the task for five response types from one
place and checks only that the index resolved:
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
iscsi_itt_to_task() bounds the index against cmds_max and looks at
nothing else, so a target can name any slot in the pool, including one
that has never been used. task->conn is then NULL, and both
iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One
unsolicited NOP-In is enough; a Text Response carrying the same ITT
crashes in iscsi_complete_task() instead.
Require the task to be in flight and not a SCSI command, the way
iscsi_itt_to_ctask() does for the command opcodes.
[ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206
[ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020
[ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060
[ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
[ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800
[ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000
[ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0
[ 6.298712] PKRU: 55555554
[ 6.298713] Call Trace:
[ 6.298714] <IRQ>
[ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0
[ 6.298758] iscsi_complete_pdu+0x54/0xa0
[ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80
[ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.298804] __tcp_read_sock+0x1ab/0x810
[ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.298814] tcp_rcv_established+0x1f56/0x3a00
[ 6.298842] tcp_v4_do_rcv+0x449/0x960
[ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in __tcf_action_put()
__tcf_action_put() decrements the reference count before decrementing the
binding count. Another thread can free the action between these operations,
causing the binding-count update to access freed memory. KASAN reports it
as:
BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340
Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64
Hold the action IDR mutex across both counter updates and IDR removal,
keeping cleanup outside the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: a mount that copy_tree() leaves out can't take over a lock
Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount
can be moved beneath a locked mount. The lock moves from the old cover
to the new mount which takes over the job of hiding what's under it and
the old cover can be unmounted. That works as long as the new mount
stays. But the caller picks the new mount and copy_tree() leaves a
mount of a mount namespace file out of every copy made without
CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never
looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make
such copies.
So a task that is root in its own user namespace gets rid of a locked
cover on a file without a race and without touching the filesystem
below it. It makes a child with a mount namespace of its own, binds the
child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH,
which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The
new mount namespace has nothing on the file. That's the usual way to
mask a single file, a bind of /dev/null or of an empty file. With a
bind of an ordinary file the file stays covered.
copy_tree() already refuses to leave out a locked unbindable mount with
-EPERM since commit df7342b24018 ("mount: Don't allow copying
MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a
mount namespace file. That also covers a tree copied with
CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user
namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS)
and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from
then on. The mount can't be left out and it can't be unmounted.
And refuse to move a mount of a mount namespace file beneath a locked
mount in the first place. Otherwise the task ends up with a mount it
can't unmount and an unshare() that fails for good.
Chris also found a second mount that goes away by itself, a clone of an
automounted mount that shrink_submounts() took along with its parent.
Commit f78ddcc87224 ("namespace: never expire a locked mount") took
care of that one.
Chris's reproducer is appended. Mode nsfile reads SECRET after the
unshare() on 7.3-rc7, with this patch the move_mount() fails with
EINVAL and the file stays covered. nsfile-control uses an ordinary file
and reads MASK both ways.
// SPDX-License-Identifier: GPL-2.0
/*
* Get rid of a locked cover with MOVE_MOUNT_BENEATH.
*
* The "admin" (root) makes a tmpfs W:
* W/D file, holds SECRET, covered by a bind of a file with MASK
* W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory
* whose "inner" holds MASK
* W/own directory of uid 1000 with the file "mine" and the
* directory "minedir", whose "inner" holds MINE
* W/dbg debugfs, mode 755. dbg/tracing is an automount point
* The "attacker" is uid 1000. It enters a new user namespace with a new mount
* namespace, so W and both covers are locked there.
*
* usage: prog MODE
* plain put a bind of own/mine beneath the cover of D, unmount the cover
* nsfile put a bind of the mount namespace file of a child beneath the
* cover of D, then unshare(CLONE_NEWNS)
* nsfile-control the same with a bind of own/mine
* shrink put a bind of the automounted tracefs beneath the cover of Dd,
* unmount the cover, put a tmpfs beneath W, call umount(W), which fails
* shrink-control the same with a bind of own/minedir
* The environment variable AUTOMOUNT_DIR names another automount point for "shrink".
*/
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <grp.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
<TASK>
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix race in discovery auth updates
Separate configfs opens can concurrently update the discovery AuthMethod
parameter. Both callers may free the same value in
iscsi_update_param_value(), causing a double-free.
Protect the lookup and replacement with the discovery TPG access lock,
as used by the other TPG configfs parameter updates. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: treat TCP_CLOSING as once-established
Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can
race with the connect loop. Immediately break and return 0 on
ESTABLISHED/CLOSING. The return value of connect() should reflect what
happened up to the point the connection was established or failed. Events
that occur afterwards must not affect it. E.g. even if OP_RW has already
set sk_err, connect() should still return 0, not ENOBUFS because of it.
Adapt the inaccurate comment above signal_pending().
Resetting a socket that is still present in connected_table can lead to
memory corruption. The reporter noted lost transports for in-flight skbs,
and I have reproduced crashes caused by re-insertion into connected_table.
list_add double add: new=, prev=, next=.
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:__list_add_valid_or_report+0x11f/0x130
Call Trace:
vsock_insert_connected.cold+0xe/0x13
virtio_transport_recv_pkt+0x10e9/0x1460
vsock_loopback_work+0x305/0x480
process_one_work+0xe4c/0x1560
worker_thread+0x4f1/0xd60
kthread+0x36e/0x470
ret_from_fork+0x47b/0x6b0
ret_from_fork_asm+0x1a/0x30
This fix is supplementary to commit 002541ef650b ("vsock: Ignore
signal/timeout on connect() if already established"). Details under Link. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Move packet RAM enable to PM runtime
Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:
[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---
Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.
Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Don't reset VMBus connection state on error/exit paths
In two places, current code forces vmbus_connection.conn_state to
DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect()
calls vmbus_initiate_unload(), which unloads the VMBus connection
only if the conn_state is CONNECTED. Consequently, the connection
remains and the Hyper-V host might continue to send messages or post
VMBus interrupts.
The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V:
Unload vmbus channel in hv panic callback"), in that
vmbus_initiate_unload() started checking the current connection
state before doing the unload. This commit removed some occurrences
where conn_state was forced to DISCONNECTED, but these two remained,
apparently due to an oversight at the time.
Fix this by not forcing conn_state to DISCONNECTED during VMBus exit,
or if a failure occurs when establishing the connection in the first
place. Whatever value conn_state has at the time is then read by
vmbus_initiate_unload() to determine if there is a connection to
be unloaded. |
| The Sadad QA Payment WordPress plugin through 1.28 does not correctly verify the authenticity of incoming payment notifications, as the verification is keyed on a merchant secret that is empty by default and the rest of the signed data is attacker-controlled, allowing unauthenticated attackers to forge a valid confirmation and mark orders as paid without payment. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cancel: don't spin on local work the task can't run
io_uring_cancel_generic() refuses to sleep while any ring on the exiting
task's tctx has local work pending. It assumes the task is that ring's
submitter and that the next io_uring_try_cancel_requests() pass will run
the work. This does not hold for a ring that was still
IORING_SETUP_R_DISABLED when the task got its tctx node from
io_uring_create() or io_ringfd_register(). The submitter is set later by
IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the
submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To
the exiting task the work stays pending forever, the loop never reaches
schedule(), and the task trips the WARN_ON_ONCE() once and then spins in
do_exit().
An unprivileged user can set this up at will by creating a disabled
ring, having a child enable it and stop, posting to the ring with
IORING_OP_MSG_RING and exiting with a request in flight that only the
child can complete. The exiting thread burns a CPU until the child runs
or dies, and with panic_on_warn set the WARN panics the kernel.
Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the
task to run the work. This is reasonable since work it cannot run cannot
complete any of its requests either, so nothing is lost by sleeping.
Drop the WARN_ON_ONCE() since handing a disabled ring to another thread
is a supported scenario, not a bug state. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
