| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dentry ref leak on V4ROOT export filehandle lookup
nfsd_set_fh_dentry() leaks the dentry reference from
exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE
switch cases detect NFSEXP_V4ROOT and goto out. The out: label
calls exp_put() but never dput(dentry), and fhp->fh_dentry was
never assigned so fh_put() cannot compensate.
A crafted NFSv3 filehandle targeting a V4ROOT export's fsid
triggers the leak on every request. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Put PCI device after handling PPR faults
iommu_call_iopf_notifier() looks up the requester with
pci_get_domain_bus_and_slot(), which returns a PCI device with its
reference count incremented.
Neither the successful iommu_report_device_fault() path nor the abort
path drops that reference, so every handled PPR request leaks a PCI
device reference.
This is the same ownership rule that was fixed for the old iommu_v2
ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device
refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was
added later as a separate PPR/IOPF notifier path.
Drop the PCI device reference after handling the PPR entry. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Avoid locking internal accesses during unmap
iommufd_access_notify_unmap() skips internal accesses because they do
not have an external unmap callback to invoke.
However, the current test calls iommufd_lock_obj() before checking
whether the access is internal. If iommufd_lock_obj() succeeds, the loop
then sees the internal access and continues, bypassing the matching
iommufd_put_object() used by the normal unmap path. This leaks the
object reference taken by iommufd_lock_obj().
Check for internal accesses first so skipped entries are never locked. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: fix device reference leak in firmware_upload_register()
firmware_upload_register()
-> fw_create_instance()
-> device_initialize()
After fw_create_instance() succeeds, the lifetime of the embedded struct
device is expected to be managed through the device core reference
counting, since fw_create_instance() has already called
device_initialize().
In firmware_upload_register(), if alloc_lookup_fw_priv() fails after
fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees
fw_sysfs directly instead of releasing the device reference with
put_device(). This may leave the reference count of the embedded struct
device unbalanced, resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix this by using put_device(fw_dev) in the
failure path and letting fw_dev_release() handle the final cleanup,
instead of freeing the instance directly from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio->private handling in netfs_perform_write()
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section". |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in offloaded map/prog info fill
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed. |
| When the JAIL_AT_DESC flag is specified, kern_jail_set() and kern_jail_get() released the reference to the caller's current prison before looking up the jail descriptor. If the descriptor lookup failed, error-handling paths released the same reference a second time.
An unprivileged local user can trigger a prison reference count underflow, which may cause the prison structure to be freed while still in use. When this is done on the jail host, the bug will generally result in an immediate panic. However, if the user is running in a jail, then it may be possible to exploit the bug to elevate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disallow multiple FENCE chunks in one submit
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gact, act_police: range check the fallback control action
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't leak the user namespace when the mount fails
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
