| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, the xDS gRPC server in GatewayNamespaceMode, configured through provider.kubernetes.deploy.type=GatewayNamespace, installs a JWT StreamInterceptor but no UnaryInterceptor, leaving every unary Fetch RPC unauthenticated. The streaming interceptor also authenticates only discoveryv3.DeltaDiscoveryRequest messages; a discoveryv3.DiscoveryRequest used by the State-of-the-World protocol fails the type assertion and returns success without JWT validation. Any pod that can reach port 18000 can use the unauthenticated unary or State-of-the-World paths to retrieve TLS private keys through StreamSecrets, all xDS resources through StreamAggregatedResources, backend endpoints through StreamClusters or StreamEndpoints, and routing configuration through StreamRoutes or StreamListeners. This issue is fixed in versions 1.7.4 and 1.8.1. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. A remote attacker may be able to cause unexpected system termination or corrupt kernel memory. |
| A weakness has been identified in PHPGurukul Blood Donor Management System 1.0. Affected by this issue is some unknown functionality of the file application/models/admin/Login_Model.php. This manipulation of the argument password/email/currentpassword/dbcurrentpwd/newpassword causes cleartext storage in a file or on disk. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. |
| net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both min_reachable and the modulus collapse so the function returns 0, and net_if_ipv6_set_reachable_time() stores that 0 into ipv6->reachable_time.
The base_reachable_time is attacker-controlled: handle_ra_input() in subsys/net/ip/ipv6_nbr.c accepts the Reachable Time field of an incoming Router Advertisement whenever it is nonzero and <= MAX_REACHABLE_TIME, so a single unauthenticated, link-local RA carrying a Reachable Time of 1 drives the computed reachable time to 0. Router Advertisements are unauthenticated by default and require only adjacency to the target link.
When a neighbor is subsequently confirmed reachable, net_ipv6_nbr_set_reachable_timer() reads the value and executes NET_ASSERT(time, "Zero reachable timeout!"). On builds with CONFIG_ASSERT enabled this triggers a fatal kernel assertion — a remote denial of service; on builds without assertions the reachable timer is armed with K_MSEC(0) and fires immediately, forcing reachable neighbors into perpetual re-solicitation (STALE), degrading Neighbor Discovery. The impact is limited to availability; there is no memory-safety, confidentiality, or integrity consequence. |
| An issue was discovered in camera in Samsung Mobile Processor Exynos 1330, 1380, 1480, 2400, 1580, 2500, 2600, and 1680. A stack-based buffer overflow occurs when a malformed message is sent to the camera driver, causing a denial of service. |
| Concrete CMS below 9.5.3 did not sanitize custom style values in the Block Design dialog before writing them into page CSS via a DOM sink, permitting stored cross-site scripting. An editor-level user could execute script in an administrator's session and escalate privileges. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 7.0 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:H/UI:P/VC:L/VI:H/VA:H/SC:N/SI:N/SA:N. Thanks Nguyen Manh Thuan for reporting. |
| Concrete CMS 9.0.0 through 9.5.3 is vulnerable to stored XSS via the custom page alias name (customAliasName) because the Edit Alias dialog applied only trim() to the submitted value and performed no input neutralization. An authenticated user holding canWrite (editor) permission on a page could store a malicious alias name that was later rendered unescaped in the administrative Sitemap panel, where it executed automatically in any administrator or editor session that opened the panel, allowing an editor to escalate to administrator through the victim's active session. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 7.3 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:P/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N. Thanks Nguyen Manh Thuan for reporting. |
| The Quads Ads Manager for Google AdSense WordPress plugin before 3.0.5 does not verify payment completion with the configured payment gateway before marking an ad-selling order as paid, allowing users who can place an order to obtain a paid ad placement without payment. |
| Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared by every TLS socket context. The functions that mutate and read it — tls_session_save(), tls_session_get(), tls_session_cache_reset(), and the settings restore handler — allocate, free, and dereference each entry's heap buffer (entry->session). Before the fix these accesses were serialized only by the per-socket context mutex ctx->lock (assigned per socket in ctx_set_lock()), which provides no mutual exclusion between different sockets touching the shared cache.
Because CONFIG_NET_SOCKETS_TLS_MAX_CLIENT_SESSION_COUNT defaults to 1, any two concurrent client sockets contend for the same slot. A thread in tls_session_get() reading entry->session inside mbedtls_ssl_session_load() can run concurrently with another thread in tls_session_save() that selects the same entry for reuse and executes mbedtls_free(entry->session) before reallocating — a use-after-free read, and a double-free when two saves evict the same entry. Both corrupt the mbedTLS heap. The cache is reached on ordinary client paths: at connect time via tls_session_store()/tls_session_restore(), and (on main) whenever a TLS 1.3 session ticket arrives during recv()/poll() via tls_session_store_current().
Exploitation requires an application that opts into per-socket client session caching (the TLS_SESSION_CACHE socket option, off by default) and runs concurrent TLS client connections on multiple threads; the timing that opens the window is influenced by the remote peer(s), so a malicious or compromised server can raise session-ticket frequency to widen it. The reliably-demonstrable impact is memory corruption leading to a crash or heap corruption (denial of service). The fix adds a dedicated session_cache_lock mutex taken across every accessor of client_cache, serializing all reads and frees and closing the race. |
| The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event().
Because udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends &buf->node to uds_ctx->ep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled — a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending &buf->node to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref().
The IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet — an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once. |
| The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue.
k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic.
An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated.
The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item. |
| Frappe before 14.49.0 allows an XSS attack that is associated with blog pages and exception pages. |
| ZITADEL is an open source identity management platform. Prior to version 4.16.0, a bug in how ZITADEL updates permissions when multiple project roles are deleted at the same time can cause some user permissions to be missed. This issue specifically affects User Grants on Granted Projects (projects shared between different organizations), potentially allowing users to keep access rights that were supposed to be completely removed. This issue has been fully resolved in version 4.16.0. There are no configuration workarounds. Upgrading to a patched version is the only way to trigger the automatic cleanup migration. Those who cannot upgrade immediately should manually review user permissions specifically for Granted Projects where multiple roles were recently deleted. |
| The The Contact Form 7 – Dynamic Text Extension plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.0.7. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. The vulnerability was partially patched in version 5.0.4. |
| The NewsBlogger theme for WordPress is vulnerable to Cross-Site Request Forgery in versions 0.2.5.6 to 0.2.5.9. This is due to missing or incorrect nonce validation on the newsblogger_install_and_activate_plugin() function. This makes it possible for unauthenticated attackers to upload arbitrary files and achieve remote code execution via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. This is due to a reverted fix of CVE-2025-1305. |
| DocsGPT through 0.20.0 posts OAuth connector session tokens to a wildcard target origin in the callback-status endpoint without validating sender origin. Attackers can obtain session tokens and provider account emails by acting as window.opener during OAuth authorization, then use tokens to disconnect victims' cloud storage connectors. |
| Refly through 1.1.0 contains a server-side request forgery vulnerability in the POST /v1/misc/scrape endpoint that fetches caller-supplied URLs without validating the scheme, host, or resolved address. Authenticated attackers can make the backend issue requests to loopback, private, and link-local addresses including cloud metadata services to read page titles and descriptions of internal resources. |
| GrowthBook through 5.0.1 returns unredacted fact table definitions including raw warehouse SQL in payloads served by unauthenticated public report and experiment endpoints. Attackers with knowledge of a publicly shared report or experiment identifier can read internal data warehouse query text, schema, table names, filter values and datasource identifiers. |
| Flowable flowable-engine through 8.0.0 contains an XML external entity injection vulnerability in ProcessDiagramLayoutFactory.parseXml() that fails to disable external entity resolution when parsing deployed BPMN resources. Attackers with process deployment privileges can embed DOCTYPE declarations with external entities in BPMN files to read arbitrary local files or trigger requests to internal network endpoints when diagram layout is computed. |
| A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install. |
