| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Refactor jump offset calculation in tail call
The old macro-based jmp_offset calculation derives the jump distance
from a stale prior-pass code stride, which can lead to wrong branch
offsets and soft lockups under extra JIT passes.
Fix this by calculating the offset directly on the absolute target:
"ctx->offset[insn + 1] - ctx->idx".
To avoid a false 16-bit range check abort during size estimation, add
a "ctx->image == NULL" guard to inject a safe dummy offset. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix acpi_package_ids[] array overflow
With LoongArch virt machine, a typical setting is one core per socket,
there will max 256 sockets (packages) on one VM. With PPTT acpi table,
array acpi_package_ids[] will be overflowed.
Here change the array size of acpi_package_ids[] with the max value of
MAX_PACKAGES and KVM_MAX_VCPUS. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Do not save/restore percpu base register in rethook trampoline
The rethook trampoline saves $r21 ($u0), the percpu base, into its frame
at entry and restores it at exit. Inbetween rethook_trampoline_handler()
may schedule via preempt_enable_notrace().
If the task migrates to another CPU, the frame's $r21 holds the old
CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until
the next user->kernel transition heals $r21, all this_cpu_*() accesses
(runqueues, RCU per-CPU data, timer tick programming, FPU ownership)
hit the wrong CPU's percpu area.
Under kretprobe-heavy preemptible load this can corrupt scheduler and
timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings,
WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs
parking in the idle loop with the constant timer never re-armed (hard
lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths
plus heavy file churn (OS install / unsquashfs).
By convention $r21 always holds the current CPU's percpu base in kernel
mode: SAVE_SOME() at exception entry reloads it only when coming from
user mode, and RESTORE_SOME() restores it only when returning to user
mode; the context-switch path never writes it. Therefore the live $r21
at trampoline exit is already correct, and nothing inbetween can change
it legitimately (kernel C code cannot write a global register variable).
The same flaw existed even in the pre-rethook kretprobe trampoline since
v6.3; it was carried over when rethook replaced it. Drop both the save
and the restore here. Drop the restore is enough to solve the issue, and
drop the save is to keep the code tidy and no need to clear it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Avoid preempt count underflow without probe
LoongArch uses break 11 for the breakpoint placed after an instruction
that Kprobes executes out of line. Since userspace can issue the same
break instruction, do_bp() can reach kprobe_singlestep_handler() when
there is no current probe.
The handler actually returns false in this case, but it first calls
preempt_enable_no_resched(). The corresponding preempt_disable() is done
by kprobe_breakpoint_handler() on a real Kprobe hit, so it has not run
here. As a result, an ordinary userspace breakpoint (code 11) underflows
the current task's preempt count.
This also makes in_interrupt() return true until the task schedules. One
visible consequence is the socket cgroup attribution: cgroup_sk_alloc()
treats the allocation as interrupt context and assigns the socket to the
root cgroup. A socket opened from the SIGTRAP handler can then avoid a
BPF_CGROUP_INET_SOCK_CREATE policy attached to the task's own cgroup.
Return as soon as kprobe_running() reports no active probe.
The same check has appeared in [PATCH v10 2/4] of the original LoongArch
Kprobes series, but was dropped before the feature reached mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: disable delayed work before freeing an interrupted transmit
cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in
wait_for_completion_killable(). If that wait is interrupted by a signal,
cancel_delayed_work_sync() can run before the CEC kthread arms the reply
timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts().
The work is then armed after the cancel, and the data is freed with its
delayed_work still pending:
ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout
Use disable_delayed_work_sync(): it cancels the work and disables it, so
the later schedule_delayed_work() becomes a no-op and the work cannot be
re-armed. The data is freed right after, so it need not be re-enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: extron-da-hd-4k-plus: add sanity check
Add check to prevent overflowing msg.msg[] in case the incoming data
is malformed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: Serialize exclusive follower delivery
cec_receive_notify() reads the exclusive follower pointer without the
adapter lock. Serialize the no-follower check and message delivery
against mode changes and release. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field on every URB completion:
offset = lines_completed * (dev->width << 1) + ...;
if (dma_q->current_field == 2)
offset += dev->width * 2 * dma_q->lines_per_field;
memcpy(plane + offset, p_buffer, lencopy);
Because the VBI node shares video_ioctl_ops with the video node, an
application can size a small VBI plane (REQBUFS/QBUF with a small width,
or with the NTSC standard), then enlarge dev->width (or switch dev->norm
to PAL) through the video node while the VBI stream is running -- the
change is allowed because only dev->vidq is checked -- and let the device
deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the
offset with the larger geometry and memcpy()s past the end of the smaller
plane that was already allocated, a heap out-of-bounds write whose offset
is attacker-chosen and whose contents come from the device. The
per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the
copy against the latched lines_per_field, not the plane's real capacity,
and vb2 does not re-run buf_prepare() for an already prepared buffer.
Refuse the format/standard change when the VBI queue is busy as well, so
the geometry cannot change underneath an allocated VBI buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: cancel NetUP CI work before teardown
netup_ci_exit() frees a netup_ci_state while its work item,
netup_read_ci_status(), may still be pending or running on the system
workqueue. The worker obtains the state with container_of() and
dereferences it, so it must not outlive the state.
netup_ci_init() queues the initial status read, and CI GPIO interrupts
subsequently queue the same work from netup_ci_slot_status(). During
remove, cx23885_finidev() calls free_irq() before the CI device is
unregistered. free_irq() prevents further IRQ handlers from running,
but does not drain work queued previously, so the worker can run after
netup_ci_exit() frees the state.
Call cancel_work_sync() before dvb_ca_en50221_release() and kfree().
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
media: go7007: defer the ALSA v4l2 put until card release
go7007_snd_init() already takes a v4l2_device reference for the ALSA
side, but go7007_snd_remove() drops it immediately after calling
snd_card_free_when_closed().
That is too early when a userspace process still has the capture PCM open.
The ALSA card and its PCM callbacks remain alive until the last file is
closed, so the release path can still reach struct go7007 through
pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path
has freed the object.
Move the matching v4l2_device_put() to the ALSA card private_free callback
so the existing ALSA reference covers the whole deferred card lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov02a10: fix endpoint parsing use-after-free
The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep)
immediately after allocating and parsing the endpoint. However, it
subsequently calls fwnode_property_read_u32() using the same 'ep'
handle, leading to a potential use-after-free.
Additionally, reading the optional 'ovti,mipi-clock-voltage' property
used to overwrite the 'ret' variable. If the property was missing,
'ret' would become negative, and this failure code would be incorrectly
returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving fwnode_property_read_u32() before
the endpoint is parsed and freed. Avoid the error leak by not
assigning the result of fwnode_property_read_u32() to 'ret'. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov7740: fix use-after-destroy in remove
The ov7740_remove() function had a severe teardown order bug where it
destroyed the driver's mutex before freeing the V4L2 control handler
which relies on that mutex, leading to a use-after-destroy kernel panic.
Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and
mutex_destroy() sequentially, but then called ov7740_free_controls()
which invokes both of them a second time, resulting in a double-free.
This patch fixes the issue by unregistering the subdevice first, and
relying exclusively on ov7740_free_controls() to safely tear down the
mutex and control handler in the correct order. |
| In the Linux kernel, the following vulnerability has been resolved:
media: platform: mtk-mdp3: Fix SCP device refcounting
mdp_probe() first tries to get the SCP handle with scp_get(). When that
fails, it falls back to looking up the SCP platform device with
__get_pdev_by_id() and then reads its driver data.
The fallback lookup returns the platform device with a reference, just
like scp_get() does. However, the fallback path currently drops that
reference immediately after platform_get_drvdata(). The driver later
still calls scp_put(mdp->scp) unconditionally from the probe error path
and from mdp_video_device_release(), which drops the SCP device
reference again.
Keep the fallback reference until the existing scp_put() call, so that
the fallback path follows the same ownership rules as the scp_get()
path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: sunxi-cir: Unregister rc device on probe failure
After rc_register_device() succeeds, later probe failures must undo the
registration with rc_unregister_device(). The current error path jumps to
the allocation cleanup label and only calls rc_free_device(), leaving the
rc device registration and resources created by rc_register_device()
behind.
Add a registered-device unwind label for the IRQ lookup, IRQ request, and
hardware initialization failure paths. Keep rc_free_device() for failures
before rc_register_device() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow
st_ref_pic_set_prediction() computes the reference RPS index as
st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59.
Both operands are u8, so when delta_idx_minus1 + 1 exceeds the
current index the subtraction wraps and the subsequent array access
at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds.
A userspace V4L2 client that can open the RKVDEC m2m decoder can
submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set
and delta_idx_minus1 crafted to trigger the underflow.
Reject the entry early when the reference index would underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requested but the BAR2 request
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: quiesce overflow recovery before freeing streams
The VIP overflow recovery worker is armed from the hardirq handler when a
FIFO overflow is detected, and the list-complete path looks the stream up
through the VPDMA list private pointer. Both keep touching stream, port
and device state; the recovery worker also resets the parser and VPDMA,
repopulates the descriptor list, and re-enables the per-list IRQs.
vip_stop_streaming() masks and clears the per-list IRQs, but it neither
synchronizes the hardirq handler nor disables recovery_work. An overflow
IRQ that has already queued recovery_work, or a list-complete IRQ in
flight when the stream is torn down, can therefore still dereference the
stream after its resources are released: the descriptor list is freed by
vip_release_stream() on file release, and the stream itself by
free_stream() on unbind/remove.
Drain the recovery worker and the IRQ handler at both teardown points
through a shared vip_quiesce_stream() helper, before any stream-owned
resource is released. disable_work_sync() cancels pending recovery_work,
drains a running instance, and raises its disable depth, so a subsequent
schedule_work() issued by a racing IRQ handler is rejected at the
workqueue scheduler: recovery_work cannot be requeued after
disable_work_sync() takes effect. The worker may still re-enable the
per-list IRQs before disable_work_sync() returns; disable_irqs() then
masks those sources and synchronize_irq() waits for any in-flight handler
that still dereferences stream state. In vip_stop_streaming() the helper
runs before the parser is stopped, since a worker drained by
disable_work_sync() may re-enable the parser before exiting and would
otherwise undo the stop. recovery_work is created disabled and enabled in
vip_start_streaming() before IRQs, pairing the enable with the teardown
disable across the streaming lifecycle.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC EXT SPS RPS counts
The HEVC SPS control carries the short-term and long-term RPS counts
that decoder drivers use to walk the matching EXT SPS dynamic arrays.
Reject SPS values that exceed the HEVC limits of 64 short-term sets and
32 long-term references so drivers cannot later index beyond those
controls.
Also reject EXT SPS ST RPS entries whose negative or positive picture
counts exceed the 16-entry arrays, or whose combined delta-POC count
exceeds the HEVC DPB maximum. |
| In the Linux kernel, the following vulnerability has been resolved:
media: zoran: Avoid freeing a registered video_device twice
zoran_init_video_device() installs zoran_vdev_release() as the
video_device release callback through zoran_template. After
video_register_device() succeeds, video_unregister_device() drops the
registered video_device reference and the V4L2 core eventually invokes
that release callback, which kfree()s the video_device.
zoran_exit_video_devices() called video_unregister_device() and then
kfree(zr->video_dev), so device teardown could free the same
video_device twice.
Remove the direct kfree() and clear the cached pointer after
unregistering. The pre-registration failure path keeps its manual free
because the video_device was not registered there.
This issue was found by a static analysis checker and confirmed by
manual source review. |
