| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix die ID init and look up bugs
In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,
uncore_device_to_die() may return -1 when all CPUs associated
with the UBOX device are offline.
Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:
- The current code breaks out of the loop. This is incorrect because
pci_get_device() does not guarantee iteration in domain or bus order,
so additional UBOX devices may be skipped during the scan.
- Returning -EINVAL is incorrect, since marking offline buses with
die_id == -1 is expected and should not be treated as an error.
Separately, when NUMA is disabled on a NUMA-capable platform,
pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()
to return -1 for all PCI devices. As a result,
spr_update_device_location(), used on Intel SPR and EMR, ignores the
corresponding PMON units and does not add them to the RB tree.
Fix this by using uncore_pcibus_to_dieid(), which retrieves topology
from the UBOX GIDNIDMAP register and works regardless of whether NUMA
is enabled in Linux. This requires snbep_pci2phy_map_init() to be
added in spr_uncore_pci_init().
Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where
NUMA is expected to be enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: move ext4_percpu_param_init() before ext4_mb_init()
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix oops due to invalid pointer for kfree() in parse_longname()
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix racy access at PCM trigger
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: Fix memory leak in unittest_data_add()
In unittest_data_add(), if of_resolve_phandles() fails, the allocated
unittest_data is not freed, leading to a memory leak.
Fix this by using scope-based cleanup helper __free(kfree) for automatic
resource cleanup. This ensures unittest_data is automatically freed when
it goes out of scope in error paths.
For the success path, use retain_and_null_ptr() to transfer ownership
of the memory to the device tree and prevent double freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Enforce expected_attach_type for tailcall compatibility
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: start using dst_dev_rcu()
Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF.
Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(),
ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
If ab->fw.m3_data points to data, then fw pointer remains null.
Further, if m3_mem is not allocated, then fw is dereferenced to be
passed to ath11k_err function.
Replace fw->size by m3_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
[ceph] parse_longname(): strrchr() expects NUL-terminated string
... and parse_longname() is not guaranteed that. That's the reason
why it uses kmemdup_nul() to build the argument for kstrtou64();
the problem is, kstrtou64() is not the only thing that need it.
Just get a NUL-terminated copy of the entire thing and be done
with that... |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject narrower access to pointer ctx fields
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple
addresses") introduced an access to the 'soc' field of struct
mtk_pinctrl in mtk_eint_do_init() and for that an include of
pinctrl-mtk-common-v2.h.
However, pinctrl drivers relying on the v1 common driver include
pinctrl-mtk-common.h instead, which provides another definition of
struct mtk_pinctrl that does not contain an 'soc' field.
Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it
will now try to dereference an invalid pointer when called on v1
platforms. This has been observed on Genio 350 EVK (MT8365), which
crashes very early in boot (the kernel trace can only be seen with
earlycon).
In order to fix this, since 'struct mtk_pinctrl' was only needed to get
a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter
of mtk_eint_do_init() so that callers need to supply it, removing
mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: remove encap socket caching to avoid reference leak
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket. |
