| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clear sock_ops cb flags before force-closing a child socket
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: target: rdma: fix ndev refcount leak on queue connect
nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which
acquires a reference on the returned ndev via kref_get(). On the path
where the host queue backlog is exceeded and the function returns
NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking
the kref.
Fix this by adding a goto to the existing put_device label before the
early return. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag). |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix managed cache race for unaligned extents
After unaligned compressed extents were introduced, the following race
could occur:
[Thread 1] [Thread 2]
(z_erofs_fill_bio_vec)
<handle a Z_EROFS_PREALLOCATED_FOLIO folio>
...
filemap_add_folio (1)
(z_erofs_bind_cache)
<the same folio is found..>
..
..
folio_attach_private (2)
filemap_add_folio (3) again
Since (1) is executed but (2) hasn't been executed yet, it's possible
that another thread finds the same managed folio in z_erofs_bind_cache()
for a different pcluster and calls filemap_add_folio() again since
folio->private is still Z_EROFS_PREALLOCATED_FOLIO.
Fix this by explicitly clearing folio->private before making the folio
visible in the managed cache so that another pcluster can simply wait
on the locked managed folio as what we did for other shared cases [1].
This only impacts unaligned data compression (`-E48bit` with zstd,
for example).
[1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of
crafted images properly") was originally introduced to handle crafted
overlapped extents, but it addresses unaligned extents as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable reconnect error path file lifetime
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()
When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE
FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse
attribute and saves it through xattr without any permission checks.
This exposes two issues:
1) A client on a read-only share can change the sparse attribute
on files it opened, even though the share is read-only.
Other FSCTL write operations already check
test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE),
but FSCTL_SET_SPARSE does not.
2) Even on writable shares, clients without FILE_WRITE_DATA or
FILE_WRITE_ATTRIBUTES access should not modify the sparse
attribute. Similar handle-level checks exist in other functions
but are missing here.
Add both share-level writable check and per-handle access check.
Use goto out on error to avoid leaking file references. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
The return value of kzalloc_flex() is used without
ensuring that the allocation succeeded, and the
pointer is dereferenced unconditionally.
Guard the access to the allocated structure to
avoid a potential NULL pointer dereference if the
allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: free sk if last
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself". |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely". |
