| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SIP parser in rust/src/sip/parser.rs stores request and response body lengths in 16-bit fields. A SIP body larger than 65,536 bytes can truncate the length and prevent frame:request.body or frame:response.body from exposing the complete body to inspection, allowing content in the omitted portion to evade frame-based detection. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 8.0.6, the FTP parser in src/app-layer-ftp.c treats a RETR or STOR command sent before PORT or PASV negotiation as a fatal application-layer error instead of a recoverable protocol event. The fatal state disables FTP application-layer parsing for the remainder of the TCP flow, so later commands can evade parser-dependent rules and logging; IPS mode instead drops the flow. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.0 until 7.0.17 and 8.0.6, the MQTT parser in rust/src/mqtt/mqtt.rs permits repeated PUBREC or PUBREL messages to be appended to one transaction without a limit. Crafted MQTT traffic can grow transaction state indefinitely, consuming CPU and memory and causing slowdown or denial of service. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, a locally supplied detection rule that combines frame inspection without content and a transformed match without content can make src/detect-engine-prefilter.c select multiple non-prefilter frame engines while preparing signatures for non-prefilter inspection. Loading the crafted rule, including in test mode, can trigger a heap buffer overflow and crash Suricata; network traffic alone cannot reach the flaw. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the HTTP/1 parser limits decompression work per transaction but does not limit how many small brotli compression bombs a single flow can submit. With response-body-decompress-layer-limit enabled, repeated compressed responses make the decompression paths in rust/htp perform expensive work for every transaction, degrading packet processing and potentially causing loss of monitoring visibility or denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, src/datasets-context-json.c assumes that a configured JSON or NDJSON dataset value_key resolves to a string. A trusted or untrusted dataset or rule feed containing a non-string value for that key can cause a NULL pointer dereference during startup, configuration test mode, or rule reload, crashing Suricata before traffic processing. This issue is fixed in version 8.0.6. |
| A flaw was found in the OIDC protocol implementation of Keycloak, an open-source identity and access management solution. The issue occurs during the token refresh process when the server restores requested audiences from stored client IDs. Keycloak fails to verify if the target audience client is still enabled before issuing a new access token. This allows an application with an existing refresh token to continue obtaining valid access tokens for a disabled client, potentially bypassing administrative access controls for resource servers that rely on offline JWT validation. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, AppLayerParserSetTransactionInspectId() in src/app-layer-parser.c uses an inverted guard and marks only already-inspected transactions as inspected. On flows passed by a pass rule or pass-the-flow exception policy, detection is skipped, so completed transactions remain unmarked, are never freed, and are repeatedly rescanned. The per-flow list can grow without bound with quadratic cleanup cost, causing CPU and memory exhaustion. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the Windows service installation and parameter-update logic in src/win32-service.c can pass an unquoted service ImagePath to CreateServiceA. When Suricata is installed below a path containing spaces and an earlier path component is writable by a local low-privileged attacker, Windows can execute an attacker-controlled program as LocalSystem, resulting in local privilege escalation. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Open edX Platform enables the authoring and delivery of online learning at any scale. From Aspen.1 until Ulmo and Verawood.1, openedx/core/lib/extract_archive.py uses _is_bad_path to validate safe_extractall targets by comparing resolved path strings with startswith instead of comparing path components. A course author or staff user with course import permission can submit a crafted .tar.gz archive through the import_olx flow initiated by cms.djangoapps.contentstore.views.import_export.import_handler. An archive member can therefore escape into a sibling course staging directory whose name shares the attacker's base64 directory prefix, causing limited cross-tenant file corruption. Zip archives are not practically affected because ZipFile.extractall strips parent traversal segments, and the advisory does not establish arbitrary filesystem writes, file reads, or direct code execution. This issue is fixed in Ulmo and Verawood.1. |
| The Pochipp plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'keyword' parameter in versions up to, and including, 1.20.2. This is due to insufficient output escaping , which reads $_GET['keyword'], applies only sanitize_text_field() (which strips tags but leaves double quotes intact) and interpolates the value directly into the value attribute of the search input via a PHP heredoc, without esc_attr(). This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user with upload_files capability (Author or above) into performing an action such as clicking on a specially crafted link to /wp-admin/media-upload. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Fix controller cleanup on EDL sysfs failure
mhi_register_controller() adds the controller device before creating the
optional trigger_edl sysfs file. If sysfs_create_file() fails, the error
path only drops the device reference and leaves the device registered.
Hence, call device_del() in the error path before put_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: pci: fix error path in rtl_pci_probe()
In the last error path in rtl_pci_probe(), the cleanup functions are
skipped due to a wrong goto label. Moreover, the successful call to
rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to
be reverted. Fix this issue by updating the labels and adding the
relevant cleanup functions to the last error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: Keep link pointers valid on realloc failure
meson_card_reallocate_links() grows the DAI link and private data
arrays with two consecutive krealloc() calls and updates the owner
pointers only after both calls have succeeded.
A successful krealloc() may move the data: it frees the old block and
returns a new one. When that happens for the link array and the second
krealloc() then fails, card->dai_link still points to the block that
krealloc() already freed, and the error path frees the new block too.
The probe error path then calls meson_card_clean_references(), which
dereferences card->dai_link and kfree()s it again, resulting in a
use-after-free and a double free.
Commit card->dai_link and card->num_links right after the first
krealloc() succeeds, so the pointer always refers to a valid allocation
that meson_card_clean_references() can walk and free. krealloc() with
__GFP_ZERO zero-initializes the added entries, so walking them on the
error path is safe. With both failure paths reduced to a plain return,
drop the goto labels and the error message. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ipu6: Do not free aux device pdata after init
ipu6_bus_initialize_device() stores the isys/psys pdata pointer in
struct ipu6_bus_device and initializes the auxiliary device. After that
point, error unwinding must drop the auxiliary device reference and let
ipu6_bus_release() free both the bus device and adev->pdata.
The isys and psys init paths already call put_device() when MMU
initialization fails, and ipu6_bus_add_device() calls
auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths
therefore run the bus release callback. The extra kfree(pdata) in the
callers can release the same object a second time.
Remove the manual pdata frees after the auxiliary device has been
initialized.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| WACRM is a self-hostable CRM template for WhatsApp. In version 0.7.0 and earlier, WACRM flow and automation write routes authenticate account viewers but do not enforce the agent role before using a service-role database client that bypasses row-level security. In src/app/api/flows/[id]/route.ts, src/app/api/flows/[id]/activate/route.ts, and src/app/api/flows/route.ts, a viewer can create, edit, activate, or delete flows because membership-only checks are followed by service-role writes. In src/app/api/automations/route.ts and src/app/api/automations/engine/route.ts, a viewer can create active automations and trigger outbound WhatsApp actions without the role required by the underlying write policies. This can permit unauthorized workflow changes, destructive flow deletion, and outbound actions from a role intended to be read-only. This vulnerability is fixed with commit 03e851bea56dcf6bb21ff1b80ba531372bf3269f. |
| The Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.1.0.4 via the upload_file function. This is due to a mismatch between the field validation pipeline and the file persistence pipeline, where hidden file upload fields bypass extension validation and a rejected file's intact upload state is later passed to upload_file() without re-validation. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the targeted form to contain a File Upload field with its Visibility set to 'Hidden'; the vulnerability is reachable by unauthenticated attackers on any publicly accessible form meeting this condition. |
| The Better Messages – Chat Rooms, Group Chat, Private Messages & AI Chat Bots plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.15.33. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to access the full message transcript, thread metadata, and user data of any chat-room thread without authentication. This is only exploitable when the chat room's only_joined_can_read setting retains its default value of '0'. |
