| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free (UAF) memory corruption.
Fix this issue by deferring the destruction of struct snd_uac_chip until
all references to the ALSA sound card are released. Register a custom
card->private_free callback (u_audio_card_free) during g_audio_setup()
that frees uac and its associated playback/capture request and ring
buffers only when the sound card reference count drops to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: remove default configfs groups on teardown
f_midi2_alloc_inst() creates default configfs child groups for the
default endpoint and default block using configfs_add_default_group(),
setting their internal refcount to 1.
However, during function teardown in f_midi2_free_inst() or EP cleanup
in f_midi2_ep_opts_release(), configfs_remove_default_groups() is
never called, therefore never dropping the refcount and leaking struct
f_midi2_ep_opts and f_midi2_block_opts.
Add the missing configfs_remove_default_groups() in the afformentioned
functions to free the structs properly. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to
sleep waiting for an event. When no setup events are pending, it calls
wait_event_interruptible_exclusive_locked_irq() with the mutex still
held. The wait macro deliberately drops the waitqueue spinlock before
sleeping but does not drop the mutex.
If a userspace daemon is polling ep0 via read() and the gadget is
asynchronously torn down via configfs (e.g., echo "" > UDC), a
deadlock can occur:
1. The configfs teardown calls functionfs_unbind(), which queues a
FUNCTIONFS_UNBIND event.
2. The daemon wakes up, consumes the event, and drops the mutex.
3. However, if the daemon loops and immediately issues another read()
before exiting, it reacquires ffs->mutex and again goes into an
interruptible sleep.
4. Meanwhile, functionfs_unbind() continues execution and attempts to
acquire ffs->mutex to tear down ep0req.
5. The kernel deadlocks because the configfs thread is stuck in an
uninterruptible sleep waiting for the mutex, while the userspace
daemon is in an interruptible sleep holding the mutex forever
because no more events will arrive.
To fix this, we drop both the waitqueue spinlock and ffs->mutex before
going to sleep, and use wait_event_interruptible_exclusive() instead.
Upon waking up, we jump back to the `retry` label to safely reacquire
the mutex and re-evaluate the state machine. By not sleeping with
ffs->mutex held, we natively decouple gadget teardowns (which require
the mutex) from userspace polling. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write
The trailing byte path in altera_cvp_send_block() dereferences a u32
pointer even when only 1-3 bytes remain in the input buffer. If the buffer
ends at a page or scatterlist boundary, this can read past the valid image
data and fault.
Copy the remaining bytes into a zero-initialized u32 before writing the
final word so only valid bytes are read from the input buffer. |
| n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the /rest/roles/:slug/assignments and /rest/roles/:slug/assignments/:projectId/members endpoints checked only whether the caller could manage the role type. A caller with role:manageProject could name a project the caller could not list and obtain member names and email addresses. The affected controller is packages/cli/src/controllers/role.controller.ts, which omitted the project:list scope check. This issue is fixed in versions 2.37.7 and 2.38.2. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
sensor_hub_get_feature() clamps its return value to the caller's buffer
size, but the copy loop still copies field->report_size / 8 bytes for
each report value. A malicious HID descriptor can advertise a large
feature field size while an IIO caller supplies a small stack buffer,
such as a single s32, causing an out-of-bounds write.
HID core stores parsed report values in __s32 slots and clamps extracted
values to 32 bits. Reject feature fields that require more than one slot
per value, guard the total byte count calculation, and clamp each
per-value copy to the remaining caller buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()
Patch series "lib/ucs2_string.c: fix out-of-bounds read in
ucs2_strnlen()", v2.
This series fixes an off-by-one out-of-bounds read in ucs2_strnlen().
The first patch is the real fix, the second patch comes as a bonus and
fixes the code indentation.
This patch (of 2):
ucs2_strnlen() checks the current character before checking whether the
caller-provided maximum length has been reached. If the input is not
NUL-terminated within that bound, the loop can read one ucs2_char_t past
the limit.
Test the length before dereferencing to prevent an off-by-one
out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: stm32: prevent out-of-bounds write on RX overflow
stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using
rx_msg.len as the write index, incrementing it on every RXBR
(receive-byte-ready) interrupt without checking it against the buffer
size:
cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct
cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a
completed message (RXEND). The number of bytes received before RXEND is
decided by the remote CEC device (it sets EOM), not by the driver. A
peer that keeps sending bytes without ending the message drives RXBR
repeatedly, pushing rx_msg.len past 16 and writing peer-controlled bytes
out of bounds into the surrounding memory. This is reachable in normal
operation once the driver has probed and receiving is enabled, from the
IRQ thread, without any local privilege.
The length check in the CEC core runs on the consumer side, after the
byte has been stored, so it does not prevent the overflow. Bound the
index in the driver before the store, as the other platform CEC drivers
already do (e.g. tegra_cec), dropping the excess bytes of an overlong
frame.
Found by static analysis tool CodeQL. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vicodec: fix out-of-bounds write in FWHT encoder
vidioc_s_fmt_vid_out() sizes the encoder CAPTURE buffer from the
compressed descriptor pixfmt_fwht, whose sizeimage_mult is 3:
coded_w * coded_h * 3 + sizeof(struct fwht_cframe_hdr). fwht_encode_frame()
encodes one plane per component, and an incompressible plane takes the
FWHT_FRAME_UNENCODED path in encode_plane(), copying the plane verbatim.
For a 4-component pixel format all four planes are full resolution
(width_div == height_div == 1), so a frame that forces every plane
through the unencoded fallback writes
sizeof(struct fwht_cframe_hdr) + 4 * coded_w * coded_h bytes, overrunning
the plane by coded_w * coded_h, which can result in corruption
of adjacent kernel heap memory.
Bump pixfmt_fwht.sizeimage_mult from 3 to 4, matching the largest
components_num among the supported raw formats, so the capture buffer is
always large enough for the unencoded fallback. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation
Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error
in nilfs_direct_propagate() during testing.
Analysis revealed that after truncating a file, a node block immediately
below the B-tree root was not deleted. Instead, it remained in the B-tree
node cache in a dirty state. The log writer subsequently detected this
block and incorrectly invoked nilfs_direct_propagate() on it, which is
designed to handle only data blocks in direct mapping.
B-tree nodes in the cache are managed by virtual block numbers, and their
logical keys typically exceed the range expected by direct mapping.
Consequently, processing such a node as a direct mapping entry triggers
a slab-out-of-bounds access.
The root cause is that when a B-tree mapping collapses into a direct
mapping during truncation, an intermediate node block pointed to by the
root node is left behind as garbage instead of being explicitly deleted.
This resolves the issue by adding a nilfs_btree_discard() operation
to delete the remaining intermediate node block during the conversion.
A 'deform' flag is added to the bop_delete interface to explicitly signal
that the deletion is part of a mapping transformation. This allows the
B-tree mapping implementation to perform the necessary cleanup and
discarding of the residual node structure that would be otherwise be left
orphaned after the transition. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: fix out-of-bounds read in signature length check
ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field
before handing the signature payload to verify_pkcs7_signature(), but the
check has the wrong sign:
if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node))
The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ,
64 bytes) into the node, so the payload is at most
snod->len - sizeof(struct ubifs_sig_node)
bytes long. Adding the header size instead of subtracting it accepts a
declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually
holds -- past the end of c->sbuf, which is vmalloc(c->leb_size).
verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder()
is then handed that inflated length and reads beyond the allocation while
walking the DER headers. The node length comes straight from the mounted
image, so a crafted signed UBIFS image reaches this via
ubifs_read_superblock() before the signature is cryptographically checked.
snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner
(c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected
subtraction cannot underflow. Legitimately signed images are unaffected: a
correct superblock never declares a signature longer than the node it is
embedded in. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock
nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with
list_for_each_entry_safe(ni, tmp, ...). For each expired entry it
sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the
source vfsmount, then reacquires the lock to list_del + kfree the
entry and continue iterating via the macro's saved tmp pointer.
The nsui_busy flag protects the current ni from concurrent
nfsd4_ssc_setup_dul() finders during the lock-drop window, but it
does not pin tmp. Another nfsd RPC thread that fails its source-
server mount and reaches nfsd4_ssc_cancel_dul() will, during that
same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount
item, and release the lock. If that item is the saved tmp of the
expire walk, the next iteration dereferences a freed
nfsd4_ssc_umount_item.
Restart the walk from the head after the mntput() unlock window so
no saved next pointer survives the lock-drop. The list is bounded
by the number of active inter-server source mounts (typically small)
and the expire delayed-work runs periodically rather than per-IO,
so the restart is cheap. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check
The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in
fh_verify of directories") details the assumption that justified
adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is
invalid (in the case of NFS reexport).
When NFSD exports an NFS filesystem it is very possible for
nfsd_mode_check() to encounter a @dentry that doesn't have
i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and
NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).
So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir
return on that branch must stay. It guards the subsequent
lookup_one_unlocked() -> __lookup_slow() path, which calls
inode->i_op->lookup() with no NULL check, so returning nfserr_notdir
is what keeps a client LOOKUP into such a @dentry from dereferencing
a NULL method pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path
When the server returns a new layout stateid while a valid one is still
held, pnfs_layout_process() calls pnfs_mark_matching_lsegs_return() on
the on-stack free_me list and jumps to out_forget. Segments whose
reference count drops to zero are unlinked from lo->plh_segs and moved
to free_me by mark_lseg_invalid(); for an idle cached segment the layout
header holds the only reference, so this happens on the first decrement.
out_forget never drains free_me -- only the success path calls
pnfs_free_lseg_list().
Commit 814b84971388 ("pNFS/NFSv4: Fix a layout segment leak in
pnfs_layout_process()") added the drain; commit 08bd8dbe8882
("pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()")
removed it while switching the destination to lo->plh_return_segs, which
is drained elsewhere. Commit fb700ef02676 ("NFSv4.1: Simplify layout
return in pnfs_layout_process()") switched the destination back to
free_me without restoring the drain.
Restore the pnfs_free_lseg_list() call. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release path refs on follow_down() error
nfsd_cross_mnt() initializes a local struct path with mntget() and
dget() before calling follow_down(). On a negative return the error
arm jumps to out without releasing those references:
err = follow_down(&path, follow_flags);
if (err < 0)
goto out;
follow_down() never drops the caller's entry-time refs on any error
sub-case; for example a pre-cross d_manage() failure leaves path
untouched, so the mntget()/dget() taken on entry survive the call.
Every other early-exit arm in nfsd_cross_mnt() (other-namespace
return, IS_ERR(exp2), and the success tail after the swap) already
calls path_put(&path); the err < 0 arm is the lone omission. The
leak inflates mnt_count and d_count on each failed cross-mount,
blocking umount and pinning dentries against the shrinker, and is
reachable by any authenticated NFS client through nfsd_lookup_dentry
or the NFSv4 READDIR encode path.
Fix by calling path_put(&path) before the goto out in the err < 0
arm so the entry-time refs are released on all follow_down() error
returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Reset write verifier when async COPY writeback fails
Async COPY captures nn->writeverf at request time and reports it to
the client via CB_OFFLOAD after the worker kthread completes. When
the post-copy vfs_fsync_range() or filemap_check_wb_err() in
_nfsd_copy_file_range() reports an error, the worker correctly
leaves NFSD4_COPY_F_COMMITTED clear so that CB_OFFLOAD encodes
wr_stable_how as NFS_UNSTABLE, but the server's write verifier is
not rotated.
A client that receives NFS_UNSTABLE in CB_OFFLOAD follows up with
COMMIT to make the copied data durable. With the verifier
unchanged, COMMIT returns the same value the client just received
via CB_OFFLOAD, and the client concludes the copy is durable --
silently dropping the data whose writeback in fact failed. This
violates the UNSTABLE+COMMIT durability contract (RFC 7862 section
15.1, RFC 8881 section 18.32) and matches the bug just fixed in
nfsd_vfs_write() and nfsd_commit().
Rotate nn->writeverf at the writeback-failure site. The async COPY
worker has no svc_rqst, so commit_reset_write_verifier() is not
available here; calling nfsd_reset_write_verifier() directly
mirrors the trace-less reset already used by
nfsd_file_check_write_error() for the same purpose. Filter out
-EAGAIN and -ESTALE, matching commit_reset_write_verifier(), since
neither indicates a durable-storage failure. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: sample writeback error cursor before async COPY loop
_nfsd_copy_file_range() samples dst->f_wb_err into "since"
after the copy loop, then uses it to detect writeback errors
via filemap_check_wb_err() once vfs_fsync_range() returns.
Because the nfsd_file cache reuses a single struct file
across requests targeting the same inode, a concurrent
COMMIT or stable WRITE on dst advances dst->f_wb_err to the
current mapping->wb_err via file_check_and_advance_wb_err()
during its own vfs_fsync_range(). If that advancement lands
between the writeback error appearing in mapping->wb_err
and the COPY worker sampling "since", the worker captures
the already-advanced cursor, errseq_check() sees cur ==
since and returns zero, and NFSD4_COPY_F_COMMITTED is set
even though writeback failed. CB_OFFLOAD then encodes
wr_stable_how = FILE_SYNC4, the client treats the copied
data as durable, and the failure becomes silent data loss.
Sample since once at the start of the function. The cursor
then reflects state in effect before this COPY issues any
writes, and filemap_check_wb_err() detects any error that
occurs during the copy regardless of which thread first
observes it. This matches the pattern used by
nfsd_vfs_write() and nfsd4_clone_file_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate symlink target length in NFSv4 CREATE
nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for
NF4LNK symlink targets, allowing a client to force a kmalloc of up to
the maximum RPC payload size (several MiB) per COMPOUND op that persists
until compound teardown. The VFS rejects oversized targets with
ENAMETOOLONG, but the allocation has already occurred.
Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater
than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr()
The BOTH_TIME_SET branch calls fh_verify() early so setattr_prepare()
can inspect the dentry. This causes nfsd_setattr() to skip
fh_want_write(), so notify_change() runs without a mount write
reference.
Add the missing fh_want_write() call after the early fh_verify(). |
