| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: mm: Move initrd phys_to_virt handling after paging_init()
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Fix stack_depot usage
Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is
enabled to fix the following call stack:
[] BUG: kernel NULL pointer dereference, address: 0000000000000000
[] Workqueue: drm_sched_run_job_work [gpu_sched]
[] RIP: 0010:stack_depot_save_flags+0x172/0x870
[] Call Trace:
[] <TASK>
[] fast_req_track+0x58/0xb0 [xe]
(cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Fix synchronous external abort on unbind
A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is
executed after the configuration sequence described above:
modprobe usb_f_ecm
modprobe libcomposite
modprobe configfs
cd /sys/kernel/config/usb_gadget
mkdir -p g1
cd g1
echo "0x1d6b" > idVendor
echo "0x0104" > idProduct
mkdir -p strings/0x409
echo "0123456789" > strings/0x409/serialnumber
echo "Renesas." > strings/0x409/manufacturer
echo "Ethernet Gadget" > strings/0x409/product
mkdir -p functions/ecm.usb0
mkdir -p configs/c.1
mkdir -p configs/c.1/strings/0x409
echo "ECM" > configs/c.1/strings/0x409/configuration
if [ ! -L configs/c.1/ecm.usb0 ]; then
ln -s functions/ecm.usb0 configs/c.1
fi
echo 11e20000.usb > UDC
echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind
The displayed trace is as follows:
Internal error: synchronous external abort: 0000000096000010 [#1] SMP
CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs]
lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs]
sp : ffff8000838b3920
x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810
x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000
x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020
x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344
x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000
x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80
Call trace:
usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P)
usbhsg_pullup+0x4c/0x7c [renesas_usbhs]
usb_gadget_disconnect_locked+0x48/0xd4
gadget_unbind_driver+0x44/0x114
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
device_release_driver+0x18/0x24
bus_remove_device+0xcc/0x10c
device_del+0x14c/0x404
usb_del_gadget+0x88/0xc0
usb_del_gadget_udc+0x18/0x30
usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs]
usbhs_mod_remove+0x20/0x30 [renesas_usbhs]
usbhs_remove+0x98/0xdc [renesas_usbhs]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xb8
drv_attr_store+0x24/0x38
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x128/0x1b8
vfs_write+0x2ac/0x350
ksys_write+0x68/0xfc
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021)
---[ end trace 0000000000000000 ]---
note: sh[188] exited with irqs disabled
note: sh[188] exited with preempt_count 1
The issue occurs because usbhs_sys_function_pullup(), which accesses the IP
registers, is executed after the USBHS clocks have been disabled. The
problem is reproducible on the Renesas RZ/G3S SoC starting with the
addition of module stop in the clock enable/disable APIs. With module stop
functionality enabled, a bus error is expected if a master accesses a
module whose clock has been stopped and module stop activated.
Disable the IP clocks at the end of remove. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stackmap overflow check in __bpf_get_stackid()
Syzkaller reported a KASAN slab-out-of-bounds write in __bpf_get_stackid()
when copying stack trace data. The issue occurs when the perf trace
contains more stack entries than the stack map bucket can hold,
leading to an out-of-bounds write in the bucket's data array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix peer HE MCS assignment
In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to
firmware as receive MCS while peer's receive MCS sent as transmit MCS,
which goes against firmwire's definition.
While connecting to a misbehaved AP that advertises 0xffff (meaning not
supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff
is assigned to he_mcs->rx_mcs_set field.
Ext Tag: HE Capabilities
[...]
Supported HE-MCS and NSS Set
[...]
Rx and Tx MCS Maps 160 MHz
[...]
Tx HE-MCS Map 160 MHz: 0xffff
Swap the assignment to fix this issue.
As the HE rate control mask is meant to limit our own transmit MCS, it
needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive MCS.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Correctly handle return of sg_nents_for_len
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then
it results in an out of bounds access.
The code checks for invalid values, but doesn't set the error code. Return
-EINVAL in that case, instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
net/hsr: fix NULL pointer dereference in prp_get_untagged_frame()
prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_std
but doesn't check if the allocation failed. If __pskb_copy() returns
NULL, skb_clone() is called with a NULL pointer, causing a crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041
Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0c
RSP: 0018:ffffc9000d00f200 EFLAGS: 00010207
RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000
RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1ee
R10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000
R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00
FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0
Call Trace:
<TASK>
hsr_forward_do net/hsr/hsr_forward.c:-1 [inline]
hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741
hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84
__netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966
__netif_receive_skb_one_core net/core/dev.c:6077 [inline]
__netif_receive_skb+0x72/0x380 net/core/dev.c:6192
netif_receive_skb_internal net/core/dev.c:6278 [inline]
netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337
tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485
tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0449f8e1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48
RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ff
RDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8
RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001
R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003
</TASK>
Add a NULL check immediately after __pskb_copy() to handle allocation
failures gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't log conflicting inode if it's a dir moved in the current transaction
We can't log a conflicting inode if it's a directory and it was moved
from one parent directory to another parent directory in the current
transaction, as this can result an attempt to have a directory with
two hard links during log replay, one for the old parent directory and
another for the new parent directory.
The following scenario triggers that issue:
1) We have directories "dir1" and "dir2" created in a past transaction.
Directory "dir1" has inode A as its parent directory;
2) We move "dir1" to some other directory;
3) We create a file with the name "dir1" in directory inode A;
4) We fsync the new file. This results in logging the inode of the new file
and the inode for the directory "dir1" that was previously moved in the
current transaction. So the log tree has the INODE_REF item for the
new location of "dir1";
5) We move the new file to some other directory. This results in updating
the log tree to included the new INODE_REF for the new location of the
file and removes the INODE_REF for the old location. This happens
during the rename when we call btrfs_log_new_name();
6) We fsync the file, and that persists the log tree changes done in the
previous step (btrfs_log_new_name() only updates the log tree in
memory);
7) We have a power failure;
8) Next time the fs is mounted, log replay happens and when processing
the inode for directory "dir1" we find a new INODE_REF and add that
link, but we don't remove the old link of the inode since we have
not logged the old parent directory of the directory inode "dir1".
As a result after log replay finishes when we trigger writeback of the
subvolume tree's extent buffers, the tree check will detect that we have
a directory a hard link count of 2 and we get a mount failure.
The errors and stack traces reported in dmesg/syslog are like this:
[ 3845.729764] BTRFS info (device dm-0): start tree-log replay
[ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c
[ 3845.731236] memcg:ffff9264c02f4e00
[ 3845.731751] aops:btree_aops [btrfs] ino:1
[ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8
[ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00
[ 3845.735305] page dumped because: eb page dump
[ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir
[ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5
[ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701
[ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384
[ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0
[ 3845.737797] rdev 0 sequence 2 flags 0x0
[ 3845.737798] atime 1764259517.0
[ 3845.737800] ctime 1764259517.572889464
[ 3845.737801] mtime 1764259517.572889464
[ 3845.737802] otime 1764259517.0
[ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[ 3845.737805] index 0 name_len 2
[ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34
[ 3845.737808] location key (257 1 0) type 2
[ 3845.737810] transid 9 data_len 0 name_len 4
[ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34
[ 3845.737813] location key (258 1 0) type 2
[ 3845.737814] transid 9 data_len 0 name_len 4
[ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[ 3845.737816] location key (257 1 0) type 2
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a UAF problem in xattr repair
The xchk_setup_xattr_buf function can allocate a new value buffer, which
means that any reference to ab->value before the call could become a
dangling pointer. Fix this by moving an assignment to after the buffer
setup. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver
After unbinding the driver, another kthread `cros_ec_console_log_work`
is still accessing the device, resulting an UAF and crash.
The driver doesn't unregister the EC device in .remove() which should
shutdown sub-devices synchronously. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: Only force 030 bus error if PC not in exception table
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon. |
| Kaspersky has fixed a security issue in Kaspersky Endpoint Security for Linux (any version with anti-virus databases prior to 18.11.2025), Kaspersky Industrial CyberSecurity for Linux Nodes (any version with anti-virus databases prior to 18.11.2025), and Kaspersky Endpoint Security for Mac (12.0.0.325, 12.1.0.553, and 12.2.0.694 with anti-virus databases prior to 18.11.2025) that could have allowed a reflected XSS attack to be carried out by an attacker using phishing techniques. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: add miss release buffer head in fc_do_one_pass()
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
hd44780_probe() allocates a memory chunk for hd with kzalloc() and
makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(),
we should release all relevant memory and resource. But "lcd->drvdata
->hd44780" is not released, which will lead to a memory leak.
We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix
the memory leak bug. |
