| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: skip sufficiently large global buffers when resizing
z_erofs_gbuf_nrpages is advanced only after every global buffer has been
grown. If a resize fails after some buffers were enlarged, a retry
revisits those enlarged buffers.
Retrying the same size then returns -ENOMEM because alloc_pages_bulk()
has no pages to add and the unchanged return value is treated as a
failure. Retrying an intermediate size allocates a temporary pointer
array smaller than gbuf->nrpages and copies more existing pointers than
the array can hold.
Skip buffers that already satisfy the request. Once all remaining
buffers have caught up, advancing z_erofs_gbuf_nrpages again describes
the guaranteed minimum size across the pool. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix use-after-free of file range info
fsnotify_pre_content() builds its file_range on the triggering task's
stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the
heap-allocated permission event so copy_range_info_to_user() can report
the offset later.
The event reader can set the event state to FAN_EVENT_REPORTED and then
sleep while preparing the file descriptor. If a signal interrupts the
triggering task at that point, fanotify_get_response() changes the state
to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack
frame while the reader still owns the event. The reader then dereferences
pevent->ppos and copies the stale stack value to userspace.
KASAN reported:
BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970
Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95
Call Trace:
fanotify_read+0x293e/0x2970
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Store the range position directly in the permission event and use
FANOTIFY_NO_RANGE when range information is unavailable. The event remains
alive until the reader finishes, so the reported offset no longer depends
on the triggering task's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check. |
| In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix per-CPU address resolution into an extended register
The destination of the per-CPU address MOV is encoded in ModRM.reg,
which is extended by REX.R, but the REX prefix is built with
add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and
this instruction addresses memory as disp32 with no base, so the bit
has no effect at all and the high register bit is simply lost.
Every is_ereg() destination therefore resolves to the wrong register,
picking whichever one shares the low three bits:
R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI
With BPF_REG_5, whose reg2hex is 0, the emitted
65 49 03 04 25 <off> add %gs:<off>,%rax
adds the per-CPU offset to RAX rather than R8. The destination keeps
the unadjusted address and RAX is clobbered, so the program goes on to
dereference a pointer that was never made per-CPU:
BUG: unable to handle page fault for address: 0000607e386a8894
RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9
Call Trace:
__bpf_prog_test_run_raw_tp+0x2dc/0x7d0
__flush_smp_call_function_queue+0x1e9/0xc80
Kernel panic - not syncing: Fatal exception in interrupt
R5 is the mildest of the four, aliasing a scratch register and faulting
at the store. R7 aliases RBP and would corrupt the frame pointer, R8
and R9 alias the argument registers.
Use add_2mod() so the register goes through REX.R, matching how
add_2reg() places it in ModRM.reg and how emit_priv_frame_ptr()
hardcodes 0x4c for the same instruction with R9. Encodings for the
non-extended registers are unchanged.
Problem showed up when trying to resurrect BPF_GCC CI (selftests built
with BPF_GCC).
This has gone unnoticed because clang reloads the address into R1
before each per-CPU access, so the destination is never an extended
register. GCC keeps several per-CPU addresses live at once, and
test_progs-bpf_gcc panics the kernel in global_percpu_data/init, where
the address of a .percpu variable ends up in R5. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: reject a zero value_size, require
max_entries to equal calc_max_entries() for that value_size and block
size, and require nr_entries to fit. Equality rather than an upper bound,
since a count below the real capacity trips BUG_ON() in fill_ablock() and
trim_ablock(). Metadata dm-array writes satisfies all three. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: bound fwctl command payload to the input buffer
fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len)
and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc()
ignores in_len and never checks the user-controlled op_size against it.
cxlctl_set_feature() bounds op_size only from below
(op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr)
bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len
and a large op_size the first memcpy() already reads past the
kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox
payload and sent to the device, and a large enough op_size can walk into
unmapped memory and oops the kernel. The Get paths pin op_size to a fixed
size but likewise read the input struct without checking in_len.
Reject, at the single dispatch point, any request whose fixed header plus
op_size does not fit in the copied-in buffer. The lower-bound test guards
the subtraction and ensures op_size was copied in before it is read. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mce: Make the MCE notifier per-region
Flavien Solt reported lifetime issues with the CXL MCE notifier, which
can lead to NULL dereferences and use-after-free in the MCE handler.
The notifier was registered per memory device and stored in 'struct
cxl_memdev_state', even though it only needs the region state (the
region's SPA range and its extended linear cache size).
Instead of keeping the memory device and endpoint alive, the correct fix
is to move the notifier into 'struct cxl_region' and register it from
cxl_region_probe() as it should be a per-region notifier. Setup the
registration to only happen for regions that have an extended linear
cache as that is the only current usage.
Remove cxl_port_get_spa_cache_alias() as it is now dead code.
[ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.
Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:
BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
Read of size 4 at addr 00000000000006b4 by task ping6/394
CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
Call Trace:
<IRQ>
kasan_report+0xc6/0x100
ipv6_rpl_srh_rcv+0xb3/0x1070
ip6_protocol_deliver_rcu+0x759/0x9a0
ip6_input_finish+0xa8/0x1b0
ip6_input+0xe1/0x490
ipv6_rcv+0x33d/0x460
__netif_receive_skb_one_core+0xd6/0x130
process_backlog+0x2cc/0xa00
__napi_poll.constprop.0+0x56/0x270
net_rx_action+0x327/0x730
handle_softirqs+0x11e/0x630
do_softirq+0xb3/0xf0
</IRQ>
Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.
Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix still_degraded being inverted in raid10_sync_request()
Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into
bitmap_operations") converted still_degraded from int to bool, but
inverted the assignment in the loop that checks whether the array will
still be degraded after the current device is recovered:
"still_degraded = 1" became "still_degraded = false".
As a result, recovering a device while another mirror is still missing
calls md_bitmap_start_sync() with degraded == false, which clears bitmap
bits that the still-missing device needs. When that device is re-added,
its bitmap-based recovery finds the bits already cleared and skips every
region written while the array was degraded, so it is marked In_sync
while holding stale data: silent corruption.
Reproducer (raid10 near=2, 4 disks, internal bitmap):
- fail and remove one disk of each mirror pair
- write to the degraded array
- re-add both disks and let recovery finish
- "check" reports mismatch_cnt=262272 after 256 MiB of degraded
writes and file contents differ; the second disk's "recovery"
completes in milliseconds because everything is skipped
The same conversion in raid1 got it right (still_degraded = true).
Restore the correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: close backchannel before destroying callback service
A backchannel receive can complete a request while the NFS callback
service is being torn down. xprt_complete_bc_request() removes the
request from bc_pa_list, drops bc_alloc_count, marks the request in use,
and then asks xprt_enqueue_bc_request() to hand it to the callback
service.
If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request()
currently returns without enqueueing or freeing the committed request.
The xprt_get() taken on entry is leaked as well. If the producer wins
the race before bc_serv is cleared, it can also enqueue onto sv_cb_list
after nfs_callback_down() has stopped the callback threads, leaving the
request linked to a svc_serv that is about to be freed.
Close the producer side before callback threads are stopped. Add
xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call
it on callback shutdown and callback-start failure before stopping the
service threads. Requests that lose the NULL transition in
xprt_enqueue_bc_request() are released through the normal backchannel
free path after balancing bc_slot_count. Finally, drain any remaining
sv_cb_list requests after the callback threads have stopped and before
svc_destroy() frees the service. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: defer rq_argp and rq_resp free until after RCU grace period
svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously
via kfree(), but defers the rqstp struct free via kfree_rcu(). After
svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is
a window where RCU readers that started before list_del_rcu() can still
traverse the thread list and find the rqstp. These readers (e.g.
nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has
already been freed — a use-after-free.
Fix this by moving the kfree of rq_argp and rq_resp into an explicit
call_rcu() callback alongside the struct free. Resources not accessed
by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain
synchronously freed. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gssx_dec_option_array error path bugs
Four coupled defects in the gssx XDR option-array decoder make the
error paths unsafe: a NULL deref in the caller, a refcount leak on
the decoded group_info, and a latent use-after-free that the leak
fix would otherwise expose.
gssx_dec_option_array() sets oa->count = 1 before allocating
oa->data. If that allocation fails, -ENOMEM is returned with
oa->count == 1 and oa->data == NULL. All other error paths jump
to free_oa: which frees oa->data and NULLs it but also leaves
oa->count == 1. The caller trusts the count:
gssp_accept_sec_context_upcall()
gssx_dec_accept_sec_context()
gssx_dec_option_array() /* fails, count=1 data=NULL */
data = res.options.data[0].value /* NULL deref */
Independently, free_creds: releases the partially decoded svc_cred
with a bare kfree(creds). gssx_dec_linux_creds() installs a
groups_alloc() result into creds->cr_group_info; that object is
kvmalloc-backed and refcounted, and only put_group_info() reaches
kvfree(). A plain kfree(creds) drops the wrapper and leaks the
group_info allocation.
The natural fix for the leak is to call free_svc_cred(creds) before
kfree(creds), but free_svc_cred() invokes put_group_info() on
creds->cr_group_info unconditionally when non-NULL. The existing
out_free_groups: path in gssx_dec_linux_creds() already called
groups_free() on that pointer without clearing it, so once
free_svc_cred() is wired in, the subsequent put_group_info() would
touch freed memory.
Fix all four together:
- Move the oa->count = 1 assignment below the oa->data allocation
so it is never set when oa->data is NULL.
- Reset oa->count to 0 at free_oa: so count and data stay
coherent and the caller sees an empty option array.
- Call free_svc_cred(creds) before kfree(creds) at free_creds:
so the refcounted cr_group_info is released. free_svc_cred()
either NULL-guards each field explicitly (cr_group_info has
an if() check) or delegates to a helper that is NULL-safe
itself (kfree for the string fields, gss_mech_put() which
guards with if(gm) at gss_mech_switch.c:342), so it is safe
to call on a partially decoded svc_cred where only
cr_uid/cr_gid/cr_group_info have been written and everything
else is zero from kzalloc.
- In gssx_dec_linux_creds()'s out_free_groups: path, release
cr_group_info with put_group_info() rather than groups_free()
so the teardown matches free_svc_cred()'s refcount-aware path,
and clear the pointer so a later free_svc_cred() on the same
creds does not release it a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2
gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags
byte at ptr[2], and padding at ptr[3..7], then passes
ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg().
None of these accesses check read_token->len first.
The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus
ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers
accept shorter tokens from the wire:
- gss_unwrap_resp_integ() enforces only an upper bound
(offset + len <= rcv_buf->len) before allocating
mic.data = kmalloc(len) and passing it to gss_verify_mic().
A malicious NFS server can therefore supply a short checksum
opaque, producing a small slab allocation that the Kerberos MIC
verifier reads past.
- gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400)
before passing the wire-supplied length to
gss_validate_seqno_mic(), which constructs a mic xdr_netobj
and calls gss_verify_mic().
- svcauth_gss_verify_header() enforces only
checksum.len >= XDR_UNIT (4 bytes) before dispatching to
gss_verify_mic().
- svcauth_gss_unwrap_integ() checks only that the checksum fits
in gsd->gsd_scratch.
Add a length guard at the top of gss_krb5_verify_mic_v2(), before any
ptr[] access or scatterlist construction. Well-formed MIC tokens from
gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN +
cksum_len bytes, so valid traffic is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id
svc_rdma_free() caches rdma->sc_cm_id->device before teardown,
then calls rdma_destroy_id(sc_cm_id) which frees the cm_id.
rpcrdma_rn_unregister() follows, but between those two calls
the transport's sc_rn entry is still installed in the device's
rd_xa. A concurrent ib_unregister_device walk can dispatch
svc_rdma_xprt_done() against the now-freed sc_cm_id.
Move rpcrdma_rn_unregister() before rdma_destroy_id() so the
transport's notification entry is removed from the xarray before
the cm_id it references is destroyed.
Also guard the sc_cm_id dereference with a NULL check: the
following patches introduce paths that reach svc_rdma_free()
with sc_cm_id == NULL (listener create failure, ADDR_CHANGE
replacement failure). |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject inline replies that overflow the pull-up buffer
An RPC-over-RDMA client can request a reply, such as an NFS READ
payload, without providing a Write list or a Reply chunk to carry
it. When such a reply needs more scatter/gather entries than the
device's Send Queue supports, svc_rdma_pull_up_needed() selects
pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole
reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size
bytes, while the reply on this path is bounded only by the client's
request, so svc_rdma_xb_linearize() copies past the end of the
buffer and corrupts adjacent slab memory. The oversized length is
then stored in sc_sges[0].length and posted, so the device also
reads beyond the mapped region.
The SGE-exhaustion branch is the only pull-up path that can exceed
the buffer: the threshold branch pulls up only replies smaller
than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE
budget are sent directly without linearization. Make
svc_rdma_pull_up_needed() report -E2BIG when the reply it would
pull up cannot fit sc_max_req_size, and fail the request with
ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping
the connection.
The helper no longer answers a simple yes/no question: it now
reports pull-up, no pull-up, or -E2BIG for a reply too large to
linearize. Rename svc_rdma_pull_up_needed() to
svc_rdma_check_pull_up() so its name no longer implies a boolean
predicate. |
