| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: initialize SecY before registering the netdevice
Creating a MACsec device with MAC offload over an LRO-capable lower
device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4
forwarding is enabled by default.
register_netdevice() invokes inetdev_init(), which disables LRO and emits
a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before
macsec_add_dev() initializes the SecY. key_len is still zero, so
macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in
rtmsg_ifinfo_build_skb(), even though the skb has enough space.
Even without the warning, notifications during registration can report
uninitialized SecY attributes, including the SCI. This ordering has existed
since the driver was introduced.
Initialize the SecY and apply the new-link attributes before registration.
Move MAC address inheritance into macsec_newlink() so the SCI can also be
initialized before registration-time notifications report it. Move the
per-CPU statistics and metadata destination allocation into ndo_init(),
and release partial allocations on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Disable the V3D interrupt across runtime suspend
vc4_irq_disable() masks the V3D interrupt sources and then calls
synchronize_irq() before the V3D is powered down. However, by itself,
this is not enough to quiesce the interrupt handler.
synchronize_irq() waits for handlers that have already set
IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE.
A GIC interrupt chip is able to mark an interrupt active as soon as a
CPU acknowledges it, so there these checks cover the whole dispatch path.
On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no
active state. A CPU that has read the hwirq out of the pending register
but has not yet reached handle_level_irq() stays invisible to
synchronize_irq().
During a power transition, vc4_irq() may therefore run after the power
domain is off, where every V3D register read will return 0xdeadbeef.
0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't
trigger NULL pointer dereference issues only because the functions
vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early
when there is no job pointer, but OUTOMEM is still able to schedule
vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it.
Therefore, fix the spurious interrupts by disabling the interrupt line
across the PM transition. To preserve the enable/disable balance, move
vc4_irq_install() and request the IRQ line disabled before the first
runtime resume. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()
This rcu_barrier() came from a time call_rcu() calls were used in
net/bridge/br_multicast.c.
Now kfree_rcu() is there, we can remove this problematic rcu_barrier()
which causes extreme RTNL pressure in many syzbot reports.
INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537.
task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337
Workqueue: netns cleanup_net
Call Trace:
<TASK>
[<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483
[<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411
[<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline]
[<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529
[<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75
[<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline]
[<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline]
[<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline]
[<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153
[<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888
[<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459
[<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157
[<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599
[<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
[<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2) |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes
me realize that is_in_v2_mode() may be called in a context where a new
cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root
pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode
flag which is set when the cpuset_v2_mode mount option is used. This
flag is written into only when cpuset_bind() is being called with a
stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is
modified to read the new cpuset_v2_mode flag instead of accessing
cpuset_cgrp_subsys.root directly.
[1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: reset ar->num_stations on hardware start
When (multiple) hw restart occurs, we end up in a situation where we
cannot accept new stations / mesh peers. This seems to be the
'num_stations' in 'struct ath11k' that did not get reset properly in
this case. In ath11k_mac_op_start(), it was indeed the only accounting var
that did not get reset so let's clear it too.
This avoids problems like those:
[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
[1248828.088115] Call trace:
[1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P)
[1248828.088119] ieee80211_reconfig+0x774/0x1438
[1248828.088123] ieee80211_restart_work+0x10c/0x178
[1248828.088127] process_one_work+0x178/0x3c0
[1248828.088130] worker_thread+0x280/0x440
[1248828.088133] kthread+0xe0/0xf8
[1248828.088137] ret_from_fork+0x10/0x20
[1248828.088141] ---[ end trace 0000000000000000 ]---
[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| IBM MQ could allow an authenticated attacker to cause a denial of service through a specially crafted message that triggers excessive memory operations during character set conversion. |
| BuildAdmin through 2.3.9 contains an insecure direct object reference vulnerability that allows authenticated backend administrators to modify other administrators' profiles via the id parameter. Attackers holding the routine/adminInfo/edit permission can overwrite avatar, nickname, email, mobile and motto fields, including a super administrator's email and mobile. |
| Incus before 6.0.7, 6.1.0 before 7.0.2, and 7.1.0 before 7.5.0 contains a missing authorization vulnerability in GET /1.0/operations/{uuid} that lets project-restricted clients read operations in other projects. Attackers holding a restricted certificate and a known operation UUID can retrieve command lines, environment secrets, websocket secrets, and trust enrolment tokens. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \
rcvnxt BF2E806, fl 0
WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640
Call Trace:
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806
WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0
Call Trace:
tcp_recvmsg_locked+0x8d1/0x2640
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by converting self-redirect verdict to __SK_PASS at the
beginning of sk_psock_verdict_apply(). This bypasses the
__SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting
the __SK_PASS path queue the skb to the psock ingress queue. The
data is then read via tcp_bpf_recvmsg_parser(), which advances
copied_seq exactly once through copied_from_self. Cross-socket
redirects continue through __SK_REDIRECT with sk_psock_eat_skb()
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and
adding a bool flag to indicate whether a store status is needed. The
callers of do_inject_vcpu() are modified to pass the pointer to the
bool flag; whenever a Store Status operation is needed, the callers can
now perform it outside the spinlock.
Opportunistically refactor kvm_s390_set_irq_state() to use
scoped_guard() and __free().
[ Added Fixes tag while picking -- Claudio ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Drop unnecessary PMD page copy when freeing
On a box with a discrete GPU, lockdep reports a possible deadlock as
soon as kswapd shrinks the TTM page pool. The immediate cause is an
x86 commit that added an mmap_read_lock() to kernel page protection
munging code.
The huge vmap code holds the same lock over a GFP_KERNEL allocation,
which is a no-no now that reclaim can take it. That allocation is in a
page table *free* path and ends up being for dubious purposes[1].
Basically, it tries to avoid hardware setting Accessed=1 in page table
entries that are unreachable by the hardware, a non-issue.
Remove the PMD copy. Detach the original PMD page at the PUD, flush
the mid-level caches, and free the PTE tables straight from the
detached PMD page. With no allocation left, the locking issue is gone.
Lockdep splat/analysis:
WARNING: possible circular locking dependency detected
7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U
------------------------------------------------------
kswapd0/269 is trying to acquire lock:
((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0
but task is already holding lock:
(pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm]
Chain exists of:
(init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem
The cycle is built from three edges:
1) pool_shrink_rwsem -> (init_mm).mmap_lock
The TTM shrinker restores the caching attribute of every page it
frees, while holding pool_shrink_rwsem:
ttm_pool_shrink()
-> ttm_pool_dispose_list()
-> ttm_pool_free_page()
-> set_pages_wb()
-> change_page_attr_set_clr() [ init_mm mmap read lock ]
2) fs_reclaim -> pool_shrink_rwsem
The same shrinker, called from reclaim.
3) (init_mm).mmap_lock -> fs_reclaim
ioremap() installing a huge PUD mapping over an existing PMD table:
ioremap_page_range()
-> vmap_range_noflush()
-> vmap_try_huge_pud() [ init_mm mmap read lock ]
-> pud_free_pmd_page()
-> __get_free_page(GFP_KERNEL) [ enters reclaim ]
[ dhansen: Lots of changelog munging/trimming and merged comments from my
version of the fix. ] |
| SiteServer SSCMS through 7.4.0 contains an authorization bypass vulnerability in ChannelsController that allows site-scoped administrators to access other sites' channels by supplying foreign channel IDs. Attackers with Channels permission on one site can read and overwrite another site's channel names, file paths, templates, link URLs, and custom fields, breaking multi-site isolation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.0, multiple ixml DOM traversal functions process deeply nested XML with unbounded recursion. The iterative XML parser accepts the document, but ixmlPrintDomTreeRecursive in ixml/src/ixml.c and ixmlNode_getElementsByTagNameRecursive, ixmlNode_getElementsByTagNameNSRecursive, ixmlNode_cloneNodeTreeRecursive, and ixmlNode_isAncestor in ixml/src/node.c recurse over firstChild and nextSibling links. An unauthenticated peer on the local network can supply deeply nested XML through a SOAP request, exhaust a service thread's stack, and crash the UPnP service. This is an incomplete-fix case for CVE-2021-28302 because its remediation converted ixmlNode_free but left these traversal paths recursive. This issue is fixed in 2.0.0. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524, which is part of version 0.9-rc3. |
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.7.0 via the 'order_id + billing_address_id (also shipping_address_id)' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to read and exfiltrate another customer's stored billing and shipping address PII — including street address, city, state, postcode, phone number, company name, VAT number, and legal registration ID — by enumerating sequential AUTO_INCREMENT order and address ID pairs. The id-equality guard intended to restrict address reuse is bypassed because the attacker controls both halves of the compared pair, and the unauthenticated AJAX entry point imposes only a soft rate limit of 5 requests per 60 seconds rather than any authentication or ownership check. |
