| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
The cleanup loop was starting at the wrong array index, causing
out-of-bounds access.
Start the loop at the correct index for zero-indexed arrays to prevent
accessing memory beyond the allocated array bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: verify orphan file size is not too big
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: reject negative file sizes in squashfs_read_inode()
Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs.
This warning is ultimately caused because the underlying Squashfs file
system returns a file with a negative file size.
This commit checks for a negative file size and returns EINVAL.
[phillip@squashfs.org.uk: only need to check 64 bit quantity] |
| In the Linux kernel, the following vulnerability has been resolved:
pid: Add a judgment for ns null in pid_nr_ns
__task_pid_nr_ns
ns = task_active_pid_ns(current);
pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
if (pid && ns->level <= pid->level) {
Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.
For example:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : __task_pid_nr_ns+0x74/0xd0
lr : __task_pid_nr_ns+0x24/0xd0
sp : ffffffc08001bd10
x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
Call trace:
__task_pid_nr_ns+0x74/0xd0
...
__handle_irq_event_percpu+0xd4/0x284
handle_irq_event+0x48/0xb0
handle_fasteoi_irq+0x160/0x2d8
generic_handle_domain_irq+0x44/0x60
gic_handle_irq+0x4c/0x114
call_on_irq_stack+0x3c/0x74
do_interrupt_handler+0x4c/0x84
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
account_kernel_stack+0x60/0x144
exit_task_stack_account+0x1c/0x80
do_exit+0x7e4/0xaf8
...
get_signal+0x7bc/0x8d8
do_notify_resume+0x128/0x828
el0_svc+0x6c/0x70
el0t_64_sync_handler+0x68/0xbc
el0t_64_sync+0x1a8/0x1ac
Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Account for failed debug initialization
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/events: Return -EEXIST for bound VIRQs
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
When calling mprotect() to a large hugetlb memory area in our customer's
workload (~300GB hugetlb memory), soft lockup was observed:
watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]
CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7
Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mte_clear_page_tags+0x14/0x24
lr : mte_sync_tags+0x1c0/0x240
sp : ffff80003150bb80
x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000
x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458
x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000
x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000
x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000
Call trace:
mte_clear_page_tags+0x14/0x24
set_huge_pte_at+0x25c/0x280
hugetlb_change_protection+0x220/0x430
change_protection+0x5c/0x8c
mprotect_fixup+0x10c/0x294
do_mprotect_pkey.constprop.0+0x2e0/0x3d4
__arm64_sys_mprotect+0x24/0x44
invoke_syscall+0x50/0x160
el0_svc_common+0x48/0x144
do_el0_svc+0x30/0xe0
el0_svc+0x30/0xf0
el0t_64_sync_handler+0xc4/0x148
el0t_64_sync+0x1a4/0x1a8
Soft lockup is not triggered with THP or base page because there is
cond_resched() called for each PMD size.
Although the soft lockup was triggered by MTE, it should be not MTE
specific. The other processing which takes long time in the loop may
trigger soft lockup too.
So add cond_resched() for hugetlb to avoid soft lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix bootup splat with separate_gpu_drm modparam
The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses
drm_gem_obj.gpuva.list, which is not initialized when the drm driver
does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms
drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam
is set:
[ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0
[ 9.523160] Mem abort info:
[ 9.523161] ESR = 0x0000000096000006
[ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9.523165] SET = 0, FnV = 0
[ 9.523166] EA = 0, S1PTW = 0
[ 9.523167] FSC = 0x06: level 2 translation fault
[ 9.523169] Data abort info:
[ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000
[ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000
[ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP
[ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT
[ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024
[ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 9.592973] pc : lookup_vma+0x28/0xe0 [msm]
[ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm]
[ 9.763632] sp : ffff800082dab460
[ 9.763666] Call trace:
[ 9.763668] lookup_vma+0x28/0xe0 [msm] (P)
[ 9.763688] get_vma_locked+0x2c/0x128 [msm]
[ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm]
[ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm]
[ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm]
[ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper]
[ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper]
[ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib]
[ 9.763782] drm_client_register+0x58/0x9c [drm]
[ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib]
[ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib]
[ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm]
[ 9.763830] msm_drm_init+0x1a8/0x22c [msm]
[ 9.763848] msm_drm_bind+0x30/0x3c [msm]
[ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4
[ 9.919283] __component_add+0xa4/0x170
[ 9.919286] component_add+0x14/0x20
[ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm]
[ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm]
[ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus]
[ 9.919341] really_probe+0xbc/0x298
[ 9.919345] __driver_probe_device+0x78/0x12c
[ 9.919348] driver_probe_device+0x40/0x160
[ 9.919350] __driver_attach+0x94/0x19c
[ 9.919353] bus_for_each_dev+0x74/0xd4
[ 9.919355] driver_attach+0x24/0x30
[ 9.919358] bus_add_driver+0xe4/0x208
[ 9.919360] driver_register+0x60/0x128
[ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus]
[ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20]
[ 9.919370] do_one_initcall+0x6c/0x1b0
[ 9.919374] do_init_module+0x58/0x234
[ 9.919377] load_module+0x19cc/0x1bd4
[ 9.919380] init_module_from_file+0x84/0xc4
[ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc
[ 9.919384] invoke_syscall+0x48/0x110
[ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8
[ 9.919393] do_el0_svc+0x20/0x2c
[ 9.919396] el0_svc+0x34/0xf0
[ 9.919401] el0t_64_sync_handler+0xa0/0xe4
[ 9.919403] el0t_64_sync+0x198/0x19c
[ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44)
[ 9.919410] ---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/pa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid migrating empty section
It reports a bug from device w/ zufs:
F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT
F2FS-fs (dm-64): Stopped filesystem due to reason: 4
Thread A Thread B
- f2fs_expand_inode_data
- f2fs_allocate_pinning_section
- f2fs_gc_range
- do_garbage_collect w/ segno #x
- writepage
- f2fs_allocate_data_block
- new_curseg
- allocate segno #x
The root cause is: fallocate on pinning file may race w/ block allocation
as above, result in do_garbage_collect() from fallocate() may migrate
segment which is just allocated by a log, the log will update segment type
in its in-memory structure, however GC will get segment type from on-disk
SSA block, once segment type changes by log, we can detect such
inconsistency, then shutdown filesystem.
In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE),
however segno #173822 was just allocated as data type segment, so in-memory
SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA).
Change as below to fix this issue:
- check whether current section is empty before gc
- add sanity checks on do_garbage_collect() to avoid any race case, result
in migrating segment used by log.
- btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix possible deadlock while configuring policy
Following deadlock can be triggered easily by lockdep:
WARNING: possible circular locking dependency detected
6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted
------------------------------------------------------
check/1334 is trying to acquire lock:
ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180
but task is already holding lock:
ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
blk_queue_enter+0x40b/0x470
blkg_conf_prep+0x7b/0x3c0
tg_set_limit+0x10a/0x3e0
cgroup_file_write+0xc6/0x420
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}:
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
wbt_init+0x17e/0x280
wbt_enable_default+0xe9/0x140
blk_register_queue+0x1da/0x2e0
__add_disk+0x38c/0x5d0
add_disk_fwnode+0x89/0x250
device_add_disk+0x18/0x30
virtblk_probe+0x13a3/0x1800
virtio_dev_probe+0x389/0x610
really_probe+0x136/0x620
__driver_probe_device+0xb3/0x230
driver_probe_device+0x2f/0xe0
__driver_attach+0x158/0x250
bus_for_each_dev+0xa9/0x130
driver_attach+0x26/0x40
bus_add_driver+0x178/0x3d0
driver_register+0x7d/0x1c0
__register_virtio_driver+0x2c/0x60
virtio_blk_init+0x6f/0xe0
do_one_initcall+0x94/0x540
kernel_init_freeable+0x56a/0x7b0
kernel_init+0x2b/0x270
ret_from_fork+0x268/0x4c0
ret_from_fork_asm+0x1a/0x30
-> #0 (&q->sysfs_lock){+.+.}-{4:4}:
__lock_acquire+0x1835/0x2940
lock_acquire+0xf9/0x450
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
blk_unregister_queue+0x53/0x180
__del_gendisk+0x226/0x690
del_gendisk+0xba/0x110
sd_remove+0x49/0xb0 [sd_mod]
device_remove+0x87/0xb0
device_release_driver_internal+0x11e/0x230
device_release_driver+0x1a/0x30
bus_remove_device+0x14d/0x220
device_del+0x1e1/0x5a0
__scsi_remove_device+0x1ff/0x2f0
scsi_remove_device+0x37/0x60
sdev_store_delete+0x77/0x100
dev_attr_store+0x1f/0x40
sysfs_kf_write+0x65/0x90
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->q_usage_counter(queue)#3);
lock(&q->rq_qos_mutex);
lock(&q->q_usage_counter(queue)#3);
lock(&q->sysfs_lock);
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute functions
The function dc_stream_set_cursor_attributes() currently dereferences
the `stream` pointer and nested members `stream->ctx->dc->current_state`
without checking for NULL.
All callers of these functions, such as in
`dcn30_apply_idle_power_optimizations()` and
`amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks
before calling these functions.
Fixes below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes()
error: we previously assumed 'stream' could be null (see line 334)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
327 bool dc_stream_program_cursor_attributes(
328 struct dc_stream_state *stream,
329 const struct dc_cursor_attributes *attributes)
330 {
331 struct dc *dc;
332 bool reset_idle_optimizations = false;
333
334 dc = stream ? stream->ctx->dc : NULL;
^^^^^^
The old code assumed stream could be NULL.
335
--> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) {
^^^^^^
The refactor added an unchecked dereference.
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
313 bool dc_stream_set_cursor_attributes(
314 struct dc_stream_state *stream,
315 const struct dc_cursor_attributes *attributes)
316 {
317 bool result = false;
318
319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here.
This function used to check for if stream as NULL and return false at
the start. Probably we should add that back. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: fix access race during throttle policy activation
On repeated cold boots we occasionally hit a NULL pointer crash in
blk_should_throtl() when throttling is consulted before the throttle
policy is fully enabled for the queue. Checking only q->td != NULL is
insufficient during early initialization, so blkg_to_pd() for the
throttle policy can still return NULL and blkg_to_tg() becomes NULL,
which later gets dereferenced.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000156
...
pc : submit_bio_noacct+0x14c/0x4c8
lr : submit_bio_noacct+0x48/0x4c8
sp : ffff800087f0b690
x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0
x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff
x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c
x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60
x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002
x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500
x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a
Call trace:
submit_bio_noacct+0x14c/0x4c8
verity_map+0x178/0x2c8
__map_bio+0x228/0x250
dm_submit_bio+0x1c4/0x678
__submit_bio+0x170/0x230
submit_bio_noacct_nocheck+0x16c/0x388
submit_bio_noacct+0x16c/0x4c8
submit_bio+0xb4/0x210
f2fs_submit_read_bio+0x4c/0xf0
f2fs_mpage_readpages+0x3b0/0x5f0
f2fs_readahead+0x90/0xe8
Tighten blk_throtl_activated() to also require that the throttle policy
bit is set on the queue:
return q->td != NULL &&
test_bit(blkcg_policy_throtl.plid, q->blkcg_pols);
This prevents blk_should_throtl() from accessing throttle group state
until policy data has been attached to blkgs. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix potential deadlock while nr_requests grown
Allocate and free sched_tags while queue is freezed can deadlock[1],
this is a long term problem, hence allocate memory before freezing
queue and free memory after queue is unfreezed.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ |
