Export limit exceeded: 396016 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 396016 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50758 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89582 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp->init_ops, bp->init_data and bp->init_ops_offsets in its error path without setting them to NULL. The cleanup function bnx2x_release_firmware() frees the same three pointers unconditionally, so if init_firmware fails and release_firmware is later called (e.g. from __bnx2x_remove or through the function state machine), all three are freed a second time. Set each pointer to NULL after kfree() in the error path so that the subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. | ||||
| CVE-2026-89575 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space for the termination NUL after the maximum 20 decimal digits of a long long value to avoid buffer overflow in sprintf(). | ||||
| CVE-2026-89563 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit() ip6_tnl_xmit() may need to expand headroom before it can push the outer IPv6 and optional encap headers. It currently does that with skb_realloc_headroom(), copies skb->sk ownership, consumes the original skb, and then continues processing with the replacement skb kept only in its local variable. That is safe only if the helper cannot fail afterwards. But this helper still has post-reallocation error exits. collect_md tunnels reject non-NONE encap after the replacement, and ip6_tnl_encap() can also fail later. In those cases the helper returns an error to its callers while the caller still only has the original skb pointer. Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on error, so they can end up freeing an skb that ip6_tnl_xmit() already consumed. Use skb_cow_head() instead. It provides the required headroom and writability without privately replacing the caller-owned skb, so later error returns cannot leave callers with a stale pointer. The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING and already call skb_cow_head() before entering ip6_tnl_xmit(). They do not rely on the removed skb_shared() reallocation. This also makes the IPv6 tunnel path consistent with ip_tunnel_xmit(). | ||||
| CVE-2026-89560 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation Whiteout objects are used in the upper layer of an OverlayFS to indicate that the file with this name does not exist in the unified view, even if it is present in one of the lower layer file systems. For the userspace implementations of OverlayFS (fuse-overlayfs), whiteout objects can be created from userspace as well: * mknod(2) with S_IFCHR and makedev(0, 0) * renameat2(2) with RENAME_WHITEOUT, creating the whiteout in the old place of the moved file. This commit guards whiteout creation in both of these cases with LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered character devices and are not bound to a driver. LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a whiteout object: creating one is the only S_IFCHR creation that the VFS exempts from CAP_MKNOD, so it is as unprivileged as creating a regular file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that expose a kernel interface [1]. For the mknod(2) case, introduce a Landlock erratum. The creation of whiteout objects through mknod(2) was previously guarded using LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using LANDLOCK_ACCESS_FS_MAKE_REG. For the renameat2(2) case, fix a bug: Before this commit, renameat2(2) with RENAME_WHITEOUT would create a directory entry even when all LANDLOCK_ACCESS_FS_MAKE_* rights were denied. This does not affect normal renames within layered OverlayFS mounts: When doing a regular rename() on a mounted fuse-overlayfs, it is the fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT, and only the Landlock domain of that daemon is checked there. Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories") Depends-on: fe72ce6710cb ("landlock: Add errata documentation section") [mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and add link(2) to the user doc] | ||||
| CVE-2026-89557 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on- disk superblock. It is used for badblocks API badblocks_set() by the following sequence, 1930 rdev->badblocks.shift = sb->bblog_shift; 1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) { 1932 u64 bb = le64_to_cpu(*bbp); 1933 int count = bb & (0x3ff); 1934 u64 sector = bb >> 10; 1935 sector <<= sb->bblog_shift; 1936 count <<= sb->bblog_shift; 1937 if (bb + 1 == 0) 1938 break; 1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1)) 1940 return -EINVAL; 1941 } bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for an invalid bb->bblog_shit, it is possible to make sector be overflowed by the following calculation, 1935 sector <<= sb->bblog_shift; Then in turn when call badblocks_set() at line 1939 with the invalid rdev->badblocks.shift set at line 1930, may result an overflow inside _badblocks_clear() in block/badblocks.c. Although there are many places to call badblocks APIs, the non-zero shift value is only used in super_1_load(), other places always use 0 as the shift value. Therefore it is unnecessary to do a general shift value overflow check inside badblock API, and just check here as the caller. This may avoid unnecessary check, make the badblocks API code more simple and elegant. | ||||
| CVE-2026-89551 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by walking the tail, pages, and head iovecs. Each per-section step uses min_t() so it never removes more bytes than that section holds, but the final accounting at the fix_len label subtracts the total bytes actually consumed from buf->len without any clamp: fix_len: buf->len -= (len - trim); When the caller has set buf->len to a value smaller than the sum of the iov_lens, (len - trim) can exceed buf->len and the unsigned subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches xdr_buf_trim() in exactly that state: buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip; buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip); xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip); buf->len is a small wire-derived value while the iov_lens are at page scale, so the per-section loops legitimately consume far more bytes than buf->len records. The wrapped buf->len then propagates as the authoritative stream bound into every downstream XDR decoder. Fix by clamping the decrement so buf->len bottoms out at zero: buf->len -= min_t(unsigned int, buf->len, len - trim); On the normal path where the iov_lens sum to buf->len, (len - trim) is always <= buf->len and the result is identical to before. No callers change behavior outside the underflow case. | ||||
| CVE-2026-89542 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_krb5_unwrap_v2 against short tokens gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN (16) bytes long, and its rotate_left() helper passes buf->len - base to xdr_buf_subsegment() without verifying that base <= buf->len. When a caller hands in a sub-16-byte token, or a token whose declared len leaves base past the end of the buffer, three distinct failures follow: gss_krb5_unwrap_v2(offset, len, buf) ptr = buf->head[0].iov_base + offset ec = *(ptr + 4) /* OOB read on short head */ rrc = *(ptr + 6) /* OOB read on short head */ rotate_left(offset + 16, buf, rrc) xdr_buf_subsegment(buf, &subbuf, base, buf->len - base) /* u32 wrap when base > len */ _rotate_left(&subbuf, shift) shift %= buf->len /* divide-by-zero when base == len */ After decryption, the cleanup arithmetic has the same shape: movelen = min_t(unsigned int, buf->head[0].iov_len, len); movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip; BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen > buf->head[0].iov_len); The BUG_ON re-adds the value just subtracted, so it reduces to min(A, B) > A and is permanently false; it cannot catch the unsigned underflow of movelen, which then drives a ~UINT_MAX-byte memmove(). Add four defense-in-depth guards inside the unwrap core so it is safe regardless of what its callers validate: - reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before touching ptr+4/ptr+6; - bail from rotate_left() when buf->len <= base, covering both the underflow and zero-length cases; - return early from _rotate_left() when buf->len is zero, so the shift %= buf->len modulo cannot fault; - replace the dead BUG_ON with a live check that returns GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. | ||||
| CVE-2026-89541 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_unwrap_resp_priv length checks gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with offset = (u8 *)(p) - (u8 *)head->iov_base; if (offset + opaque_len > rcv_buf->len) goto unwrap_failed; maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, offset + opaque_len, rcv_buf); Both operands are u32 and the sum is computed in u32. A reply with opaque_len near 0xffffffff makes offset + opaque_len wrap to a small value that is below rcv_buf->len, so the bound check passes and gss_unwrap() is called with end < begin. The check also lacks a lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt header reads at ptr+4 and ptr+6 then run past the token. A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the rotate_left() loop that follows. Fix by replacing the single combined check with three guards that are safe in u32 arithmetic and that enforce the RFC 4121 minimum outer token length: if (offset > rcv_buf->len) goto unwrap_failed; if (opaque_len > rcv_buf->len - offset) goto unwrap_failed; if (opaque_len < GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; The first guard makes the subtraction in the second guard unconditionally safe; offset is derived from a successful xdr_inline_decode() in the head kvec, so in practice it already satisfies the bound. The floor mirrors the server-side check added in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token minimum length"). | ||||
| CVE-2026-89538 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->len to a logical length, which can be much smaller than head[0].iov_len (the allocated receive-page capacity). It then calls xdr_buf_trim() with a trim length derived from the 16-bit "extra count" (ec) field in the Kerberos v2 token header. The ec field is authenticated by the post-decrypt memcmp() against the encrypted header copy, so a randomly-mutated value is rejected. However, any peer holding a valid GSS context can legitimately encrypt a token whose ec exceeds the plaintext length. Per RFC 4121, such a token is structurally malformed. Although xdr_buf_trim() now clamps the buf->len subtraction to avoid unsigned underflow, the buffer is still left in a semantically invalid state (zero length, inconsistent iov lengths) when ec is oversized. Reject these tokens before calling xdr_buf_trim(), giving callers a well-defined GSS_S_DEFECTIVE_TOKEN error and keeping the xdr_buf internally consistent. The wrapped blob begins at a nonzero offset -- both callers pass len as offset + opaque_len -- so buf->len still counts the offset bytes that precede the blob. Compare the trim length against the remaining wrapped segment, buf->len - offset, rather than the whole buffer; comparing against buf->len alone leaves an offset-wide window in which an oversized ec passes the test and xdr_buf_trim() cuts into the bytes ahead of the blob. | ||||
| CVE-2026-89533 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a Read chunk's segment list to build a sub-range starting at byte offset and spanning length bytes for a Position-Zero or Call chunk. Two arithmetic defects in the per-segment loop produce wrong DMA lengths and a u32 underflow: pcl_for_each_segment(segment, chunk) { if (offset > segment->rs_length) { offset -= segment->rs_length; continue; } dummy.rs_handle = segment->rs_handle; dummy.rs_length = min_t(u32, length, segment->rs_length) - offset; dummy.rs_offset = segment->rs_offset + offset; First, the skip predicate uses '>' instead of '>='. When offset equals the segment's full rs_length, the segment is fully consumed and should be skipped, but the loop falls through into the body. The resulting dummy.rs_length is min_t(u32, length, rs_length) - rs_length, which underflows to a near-UINT_MAX u32 when length is smaller than rs_length, or is zero otherwise. Second, the length formula subtracts offset from the min_t() result rather than from segment->rs_length before the cap. For offset > 0 the segment's residual is rs_length - offset, not rs_length, so the cap must be applied to the residual. With the current bracketing, whenever length is smaller than rs_length - offset the per-segment length becomes length - offset instead of length, silently dropping offset bytes from the rebuilt chunk. Combined with the boundary case above it also enables the u32 underflow path, which propagates a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB kmalloc_array_node() in svc_rdma_get_rw_ctxt(). Additionally, svc_rdma_read_call_chunk() can invoke this function with length == 0 when the last Read chunk ends exactly at the end of the Call chunk. With the corrected >= predicate, every segment is skipped and the function returns the initial -EINVAL, rejecting a valid request. Return success immediately when length is zero. Also break out of the loop once length is fully consumed to avoid passing zero-length segments to svc_rdma_build_read_segment(). Fix by using '>=' so a fully-consumed segment is skipped, by moving '- offset' inside min_t() so the cap is applied to the segment's residual length, by returning success for zero-length requests, and by stopping iteration when the requested range has been consumed. | ||||
| CVE-2026-89532 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix pcl_for_each_segment for empty chunks When a parsed chunk list contains a chunk whose ch_segcount is zero, pcl_for_each_segment computes its inclusive upper bound as &chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the subtraction wraps to 0xFFFFFFFF and the bound lands far past the ch_segments flex array. The loop body then walks unrelated memory at sizeof(struct svc_rdma_segment) stride until it faults. A zero-segcount chunk is reachable from the wire: xdr_check_write_chunk() only rejects segcount values greater than rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs, so a Write or Reply chunk advertising zero segments leaves ch_segcount == 0 on the list. When the transport has negotiated Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four PCLs with pcl_for_each_segment and dereferences segment->rs_handle on each iteration, turning the underflow into an out-of-bounds read and a general protection fault. xdr_check_write_list / xdr_check_reply_chunk pcl_alloc_write() chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */ list_add_tail(&chunk->ch_list, &pcl->cl_chunks) /* fill loop iterates zero times for wire segcount 0 */ svc_rdma_get_inv_rkey() pcl_for_each_chunk(rc_write_pcl) pcl_for_each_segment(segment, chunk) pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */ segment->rs_handle /* OOB read -> GPF */ Fix by switching the macro to a half-open upper bound that uses ch_segcount directly. For ch_segcount == 0 the loop start equals the loop end and the body is skipped; for ch_segcount > 0 the iteration range is unchanged. All six existing call sites in net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound, so no caller changes are needed. | ||||
| CVE-2026-89525 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udf: reject VAT indexes equal to the entry count UDF 1.50 virtual partition mapping uses the VAT as an array of physical block mappings. s_num_entries stores the number of entries in that array, not the highest valid index. The valid VAT indexes are therefore below s_num_entries. udf_get_pblock_virt15() currently rejects only indexes greater than s_num_entries. A crafted image can request index s_num_entries, pass the bounds check, and make the kernel read one entry past the allocated VAT table. Change the check to reject block >= s_num_entries, so the count is handled as an exclusive upper bound. A crafted UDF image reproduced this on origin/master commit 0e35b9b6ec0ffcc5e23cbdec09f5c622ad532b53 with a KASAN slab-out-of-bounds report in udf_get_pblock_virt15(). Trail of Bits has a reproducer that triggers kernel panic demonstrating the bug, and can share it if needed. | ||||
| CVE-2026-89524 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx() bounds the declared lengths from above (their sum must fit the received event), but an assoc request/response shorter than its fixed offset still underflows here: the u8 wraps to ~250, and cfg80211_connect_result() / cfg80211_roamed() then treat that wrapped value as the IE length and copy that many bytes out of the small assoc_info buffer to user space via nl80211, disclosing adjacent slab memory. Clamp both lengths to their offsets before subtracting. Found by 0sec (https://0sec.ai) using automated source analysis; the missing lower bound is evident from source. Compile-tested. | ||||
| CVE-2026-89497 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: skip leading spaces before parsing client debug masks orangefs_prepare_cdm_array() sizes each client debug keyword buffer with strcspn(cds_head, " "), but then parses the keyword with %s. The %s conversion skips leading whitespace, while strcspn() does not. If a client debug entry starts with a space, the allocation can be sized for an empty keyword while sscanf() copies the following non-empty token. This can write past the end of the allocated keyword buffer. Skip leading spaces before computing the keyword length so the allocation matches the string parsed by sscanf(). | ||||
| CVE-2026-89495 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lockres_handler() passes mres->lockname_len unchecked to dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname slab object: a heap out-of-bounds write of up to ~223 bytes. - the same handler trusts mres->num_locks without checking that the message is large enough to hold that many entries, so dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len) copy and trips a BUG_ON (an out-of-bounds read ending in a panic). The other o2dlm receive handlers already reject an oversized name; the migration and recovery handlers have omitted it since the DLM was added (see the Fixes tags). Patch 1 bounds namelen; patch 2 validates lockname_len, num_locks, and the payload size. Conforming recovery and migration traffic is unaffected. o2net authenticates peers only by the DLM domain key, so any node that has joined the domain -- including a compromised or malicious member -- can send these messages. There is no local trigger; the attacker must already be a member of the cluster. Each sink was confirmed under KASAN with an out-of-tree module mirroring it exactly -- a kmem_cache/kmalloc of the real destination size, then the same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes, Read for the recovery walk, and a panic. A userspace AddressSanitizer build faults identically under -m32 and -m64. Scrubbed logs are available on request. I reported this privately to security@kernel.org and the ocfs2 maintainers on 2026-06-20; with no response after the standard embargo period I am posting the fix publicly. I have no embargo requirement. This patch (of 2): A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied name length (migrate->namelen) without bounding it. dlm_init_mle() then copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[] array of an o2dlm_mle slab object, so a malformed message from a cluster peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds write of attacker-controlled data, reachable by any node in the domain. Reject an oversized name, the way dlm_master_request_handler() and the other o2dlm receive handlers already do; the migration handler omits the check entirely. Conforming messages are unaffected. | ||||
| CVE-2026-89490 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix readdir position truncation on 32-bit kernels In ocfs2_dir_foreach_blk_el(), the directory cookie position is rebuilt with ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset; `ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask ~(sb->s_blocksize - 1) is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB block size). In the AND expression with the 64-bit `ctx->pos`, that unsigned operand is zero-extended to 64 bits per the usual arithmetic conversions, yielding 0x00000000fffff000. The high 32 bits of `ctx->pos` are silently cleared, even though directory size is allowed to exceed 4 GiB. When readdir() crosses the 4 GiB boundary on a 32-bit kernel the position is reset back into the first 4 GiB block, making the re-validation path re-enumerate already-returned dirents indefinitely. This is ocfs2_dir_foreach_blk_el(), the extent-list readdir path taken for all non-inline directories, so a directory large enough to cross 4 GiB reaches it. This is the same class of bug that commit 3dce5bb82c97 ("exfat: Fix bitwise operation having different size") fixed in exfat, and the fix mirrors the equivalent ext4 fix in this series. Cast the operand to loff_t so the mask is 64-bit before the AND: ctx->pos = (ctx->pos & ~((loff_t)sb->s_blocksize - 1)) | offset; 64-bit kernels are unaffected. | ||||
| CVE-2026-89480 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against. | ||||
| CVE-2026-89476 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix stream->outcnt underflow on duplicate RECONF responses A cached RECONF chunk may contain more than one request parameter. A duplicate response can therefore find and process the same ADD_OUT request again while another parameter is still outstanding, rolling back outcnt twice and possibly underflowing it. Track outstanding request types as bits and clear each bit after its first response. Later responses for the same request are then ignored. | ||||
| CVE-2026-89466 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: terminate the strings from firmware The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and leaves the destination without a terminator. Those destinations are model_number, serial_number and oem_info, each BATTMGR_STRING_LEN and declared next to each other. They go out to user space as val->strval, which power_supply_format_property() prints with "%s", so a firmware string that fills the whole field makes that read run into the following members. Use strscpy() so the copy always terminates, the way the SM8350 path already does for the same field. | ||||
| CVE-2026-89443 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the user-provided level as an index into perf_levels[] via _read_pp_level_info() and _read_bf_level_info(), but neither helper validates it first. The adjacent level-info helpers reject levels above max_level before reading the same per-level register block. Add the same bounds checks to the mask helpers, and reject disabled SST-PP levels in isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info(). This prevents out-of-bounds reads from the per-level offset table on invalid ioctl input. | ||||