| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: check import_ubuf() return value
import_ubuf() can fail if the address range (provided by the userspace
ublk server) is outside the allowed user address space. Return that 0
bytes were copied if import_ubuf() fails rather than passing an
uninitialized struct iov_iter to ublk_copy_user_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline xattrs during inode block validation
Patch series "ocfs2: validate xattr entry bounds", v7.
This series validates OCFS2 xattr entry name/value bounds when xattr
metadata is read and validated, before getxattr() or listxattr() can walk
out-of-range entry arrays or offsets from corrupted metadata.
This patch (of 2):
ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk
metadata from it, but inline xattr metadata is still checked only in
operation-specific consumers. The existing ibody lookup helper validates
inline header placement and entry count, but inode block validation does
not reject entry name/value bounds.
Add a flat xattr entry validator and call it from inode block validation
for inline xattrs. Keep the operation paths on their existing
header/count lookup checks; the full entry bounds check now runs when the
inode block is validated at read time.
Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or
listxattr() can walk past the inline storage.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170
Read of size 2 at addr ffff8881242a2000 by task python3/529
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_find_entry+0x5a/0x170
ocfs2_xattr_get_nolock+0x20a/0x820
ocfs2_xattr_get+0x10c/0x1e0
__vfs_getxattr+0xe2/0x130
vfs_getxattr+0x185/0x1b0 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
bucket block while checking name/value offsets against the bucket block
they target.
Reject corrupted external xattr metadata before listxattr() or getxattr()
can walk out-of-range entry arrays or name/value offsets.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190
Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_list_entries+0xd7/0x190
ocfs2_listxattr+0x3f6/0x610
listxattr+0x90/0xe0
path_listxattrat+0xed/0x220
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Invalidate RCU pointers after final spin unlock
In a sleepable BPF program, a spin lock can provide the only RCU protection
for a kptr. The final bpf_spin_unlock() ends that protection, but the
verifier leaves the pointer valid. Another CPU can then free the object
before the pointer is used. A capability-limited runtime PoC triggered a
task_struct use-after-free in __bpf_get_task_stack().
Record whether the program is in an RCU-protected context before releasing
the lock. Invalidate RCU-protected pointers only when the unlock leaves the
final such context. This preserves valid pointers in non-sleepable programs
and inside an explicit RCU read-side section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold QP references for AE and CM processing
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregister_handler_list() blocks future handler lookups, but it does
not wait for sc_rx_work that already passed o2net_handler_get(). That
drain needs to cover local listener teardown as well, where the o2net
ordered workqueue may already be inside destroy_workqueue().
Fix the lifetime rule in both directions. Initialize the region delayed
works before publishing reg through the o2net handler table, keep new or
stopping regions non-armable with hr_stopping, and quiesce both delayed
works on failed-start and teardown paths even when no heartbeat thread is
left to call o2hb_disarm_timeout(). Then unregister handlers before
tearing down handler-visible region state and make the drain wait for the
active or destroying o2net ordered workqueue before release frees reg.
The buggy scenario involves two paths, with each column showing the order
within that path:
region lifecycle: late negotiate callback:
1. make_item() registers the 1. o2net_process_message() gets a
region handlers before heartbeat handler for reg.
dev_store() has built a 2. The callback runs after the lookup
runnable heartbeat context. lock is dropped and dereferences reg.
2. A failed start or rmdir 3. An approve or timeout path tries to
stops the heartbeat thread, queue reg's delayed work, or release
quiesces existing work, and races the callback body after handler
drops the final configfs ref. unregister.
3. region_release() must drain 4. The callback or delayed work can
handler-visible o2net rx work outlive reg unless lifecycle code
before freeing reg. keeps the region non-armable and
drains the active-or-destroying
o2net workqueue.
Validation reproduced this kernel report:
KASAN slab-use-after-free in __run_timers+0x22c/0x5b0
Write of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__run_timers+0x22c/0x5b0
kasan_report+0xe0/0x110
_raw_spin_unlock_irqrestore+0x27/0x60
try_to_wake_up+0x191/0xf70
timer_expire_remote+0xae/0xf0
run_timer_softirq+0x19b/0x1a0
handle_softirqs+0x156/0x660
__irq_exit_rcu+0xc4/0x160
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
o2hb_heartbeat_group_make_item+0x3c/0x600 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: post the full-feature receive buffers after session registration
isert_put_login_tx() posts the full-feature receive buffers before
__transport_register_session() runs, so an initiator that does not wait
for the final Login Response can still have a SCSI command executed
against an se_session whose se_tpg is NULL - the same oops as the
previous patch, at target_submit+0xbe.
Post them from isert_get_rx_pdu(), which the previous patch already uses
to send that response, and post them before that send: the receive queue
is filled at the moment the initiator is told it may use it. Allocating
there keeps the existing property that a memory allocation failure cannot
happen once the final Login Response is on the wire.
The receive queue is already empty between the final Login Request and
isert_post_recvm(); this moves the second point later, from a median of
92 us to 172 us over 1200 logins. Only an initiator that sends before it
has been told to can reach that window, and on IB and RoCE its send is
retried there until the buffers appear - isert_rdma_accept() asks for
rnr_retry_count = 7. iWARP has no RNR flow control, so there the same
send terminates the connection instead.
Measured over rxe, 400 login cycles per run, with an initiator that does
not wait: an instrumented build counted no entries to isert_recv_done()
before the buffers are posted in 10 runs, where that initiator oopsed
8 of 10 unpatched runs and 5 of 10 with only the previous patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix use-after-free in siw_accept()
siw_accept() looks up the QP supplied by userspace. If that QP is
already in RTS, the function jumps to error cleanup before associating
the incoming CEP with it.
The cleanup tests whether qp->cep is non-NULL and assumes the current
call installed the association. However, qp->cep can point to the CEP
of an existing connection. The cleanup then drops a reference from the
incoming cep, not qp->cep. Once the incoming endpoint loses its
remaining references, this can free it before the subsequent cep->qp
store, causing a use-after-free. It also clears the existing QP
association.
Only release the association reference when qp->cep is the incoming
CEP. This preserves an existing association and avoids accessing the
freed endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
module/dups: Fix use-after-free in kmod_dup_req lifetime handling
The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed
only after it is no longer referenced. When releasing an instance, the
kmod_dup_request_delete() function removes the kmod_dup_req from the
dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it.
However, this doesn't work correctly because parallel users referencing the
instance in kmod_dup_request_exists_wait() don't enter an RCU read-side
critical section. This can result in a use-after-free.
The kmod_dup_request_exists_wait() function may need to hold a valid
reference to a kmod_dup_req instance across a blocking wait until the
corresponding modprobe command completes. This makes it unsuitable for RCU.
Fix the issue by changing the lifecycle management of kmod_dup_req to use
reference counting. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: don't clobber the extent buffer when zeroing it out
On a zoned filesystem a freed-but-still-dirty tree block is written out
as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write
pointer advancing. btree_csum_one_bio() implemented this by memzeroing
the extent buffer's own folios before submission.
That destroys the in-memory buffer while it may still be referenced. In
particular btrfs_free_tree_block() can run on it afterwards and reads
the header to add a delayed reference; once the header has been zeroed
it frees bytenr 0 and corrupts the extent tree (the
btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an
"unable to find ref" abort). It is flaky and reproduces under fsstress,
e.g. generic/461 and generic/013.
Write the zeros to disk from the shared zero page instead and leave the
extent buffer content untouched, so any later reference - including the
delayed reference from btrfs_free_tree_block() - still sees a valid
header. end_bbio_meta_write() now clears writeback on the buffer's own
folios, as the bio no longer carries them. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind
hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via
hci_conn_timeout (disc_work) -> hci_proto_disconn_ind ->
l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted
concurrently.
disc_work is disabled sync in hci_conn_del(), so we cannot take
hci_dev_lock in disc_work.
Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock
which is held in other access paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
