| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Fail TX enqueue when the QP link is down
Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to
make ntb_transport_tx_enqueue() drop packets submitted while the QP link
is down, but it only returns 0 without consuming the packet. Zero means
success by this function's contract, so ntb_netdev reports NETDEV_TX_OK
and forgets the skb: nothing queued it, nothing frees it, and it leaks,
one skb for every transmit racing a link-down.
Return -ENOLINK instead, restoring the contract that a non-zero return
leaves the buffer owned by the caller. With the preceding patch,
ntb_netdev frees the skb on non-retryable enqueue failures and returns
NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking
or entering a busy retry loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not dereference an unset send buffer on the SMC-D teardown path
smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its
sk_wait_event() condition, and sk_wait_event() evaluates that condition
once with the socket lock released. smcd_buf_detach() clears
conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group
terminating while a socket waits there leaves the helper dereferencing
NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and
smc_close_cancel_work() drops the lock across two cancel_*_sync() calls.
Sample the pointer once in the helper, report nothing prepared while it is
unset, and bound the ioctl the same way. The receive tasklet dereferences
the field directly in smc_cdc_msg_recv_action(), not through this helper;
1/2 is what keeps it from running that late. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix socket refcount leak in smc_switch_conns()
smc_switch_conns() takes a reference on the SMC socket before dropping
lgr->conns_lock, so the connection stays alive while the CDC slot is
fetched:
sock_hold(&smc->sk);
read_unlock_bh(&lgr->conns_lock);
/* pre-fetch buffer outside of send_lock, might sleep */
rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend);
if (rc)
goto err_out;
The err_out label only drops the wr_tx link reference, so this early exit
returns without the matching sock_put(). The second error exit is not
affected, because sock_put() has already run by then.
A leaked sk_refcnt means the smc_sock is never destroyed. Its send and
receive buffers stay allocated, and for a user socket the reference held
on the network namespace is never released, so the netns can no longer be
torn down.
smc_cdc_get_free_slot() fails when the target link goes down or when the
connection has been killed while the switch is in progress. Both are
reachable during the link failover this function implements, so the leak
is triggered by the same hardware events that make smc_switch_conns() run
in the first place.
Restructure so there is a single sock_put() covering both outcomes,
instead of adding a second one to the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: sm501: Fix potential memory leaks during remove
The memory allocated for struct sm501_devdata in sm501_pci_probe() and
sm501_plat_probe() is not freed by the corresponding remove functions
sm501_pci_remove() and sm501_plat_remove(). Fix that by adding a call to
kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: bound the MIDI event length from the device
usb6fire_comm_receiver_handler() forwards a MIDI event using a length
byte the device supplies, with no bound and no check that the transfer
delivered that many bytes:
if (!urb->status) {
if (rt->receiver_buffer[0] == 0x10) /* midi in event */
if (midi_rt)
midi_rt->in_received(midi_rt,
rt->receiver_buffer + 2,
rt->receiver_buffer[1]);
}
receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so
only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the
device chooses, so a device that answers with 0x10 and a length of 0xFF
makes snd_rawmidi_receive() read 255 bytes starting two bytes into a
64-byte object. The bytes past the buffer are handed to userspace
through the rawmidi read path.
urb->actual_length is not consulted either, so a short transfer leaves
both the type byte and the length byte at their previous values and the
handler acts on stale data.
The receiver URB is submitted from usb6fire_comm_init() at probe, so the
read happens on plug with no user action; forwarding to userspace also
needs a MIDI input substream open, since usb6fire_midi_in_received()
only calls snd_rawmidi_receive() when rt->in is set.
KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device:
BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive
Read of size 255 at addr ffff000009f64682 by task bash/183
__asan_memcpy
snd_rawmidi_receive
usb6fire_midi_in_received [snd_usb_6fire]
usb6fire_comm_receiver_handler [snd_usb_6fire]
Allocated by task 11:
usb6fire_comm_init [snd_usb_6fire]
usb6fire_chip_probe [snd_usb_6fire]
The buggy address is located 2 bytes inside of
allocated 64-byte region [ffff000009f64680, ffff000009f646c0)
Reject the event when the length exceeds the bytes that follow the
header, and require the transfer to have delivered the header plus that
many bytes. The receiver URB is submitted with a 64-byte
transfer_buffer_length, so a genuine device cannot deliver an event
longer than those 62 bytes and nothing valid is dropped.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Check card index validity at probe
aloop driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: do not copy out an uninitialised init response
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
0, private->bInterfaceNumber,
step0_resp, private->step0_resp_size);
if (err < 0)
return err;
usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or
zero-length data stage completes with status 0 and snd_usb_ctl_msg()
returns a small actual_length. The only check is err < 0, so a short
transfer is accepted as success.
snd_usb_ctl_msg() copies the full size back unconditionally:
buf = kmemdup(data, size, GFP_KERNEL);
...
memcpy(data, buf, size);
Bytes the device never wrote are therefore restored into resp unchanged
and copied to userspace. step0_resp_size and step2_resp_size are each
validated only to 1..255, so the caller also picks the slab cache, from
kmalloc-8 up to kmalloc-512.
On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data
stage, s0 = s2 = 255:
# init_on_alloc off, no spray
step0 window [0,255): nonzero=94/255
000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01
010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff
# same kernel, kmalloc-512 pre-seeded with an 8-byte tag
step0 window [0,255): nonzero=219/255 tagbytes=232
# identical run, init_on_alloc=1
step0 window [0,255): nonzero=0/255 tagbytes=0
# all three runs
step2 window [255,510): device words matched=62/62
a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address
ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is
exactly the step-0 region.
Zero the buffer, and require the step-0 transfer to deliver the full
step0_resp_size bytes so a short data stage is reported as an error.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mpu401: Check card index validity at probe
mpu401 driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mts64: Check card index validity at probe
Although mts64 driver has a check of the given devptr->id value, it
doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: portman2x4: Check card index validity at probe
Although portman2x4 driver has a check of the given devptr->id value,
it doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: serial-u16550: Check card index validity at probe
serial-u16550 driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virmidi: Check card index validity at probe
virmidi driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-stats: fix a crash if allocation of per-cpu data fails
If "dm_kvzalloc(percpu_alloc_size, cpu_to_node(cpu))" fails, the code
jumps to the "out" label and calls dm_stat_free. dm_stat_free does
"for_each_possible_cpu(cpu) { dm_kvfree(s->stat_percpu[cpu][0].histogram,
s->histogram_alloc_size);", which crashes with NULL pointer dereference
if s->stat_percpu[cpu] is NULL.
This commit fixes the bug by testing s->stat_percpu[cpu] for NULL before
using it. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate on-media seg_num against the cache device size
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: detect a cycle in the last-kset chain during replay
cache_replay() follows the on-media last-kset chain by next_cache_seg_id
with no cond_resched(). A forged chain that points back into a segment it
has already visited makes the replay loop follow it forever.
Cap the last-kset hops at cache->n_segs; a valid chain visits each segment
at most once. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: only hand out initialized cache segments
get_cache_segment() scans the segment map up to cache->n_segs, the
physical device segment count, but cache_segs_init() only initializes
the first cache_info->n_segs segments. A crafted image with
cache_info->n_segs smaller than the device count leaves the remaining
pcache_cache_segment structs zeroed (segment.data == NULL), and the
allocator can hand one to cache_kset_close(), which writes through the
returned segment's data pointer with no NULL check.
Bound the allocator's search to cache_info->n_segs so only initialized
segments are ever returned. A conforming cache sets n_segs equal to the
device segment count, so this rejects nothing legitimate. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: bound IBI payload to the requested max_payload_len
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no check against the slot size.
A device that sends more bytes than the slot holds writes past
slot->data, an out-of-bounds write into the IBI pool.
Bound the loop by dev->ibi->max_payload_len and clamp each read to the
space left in the slot, the same way dw-i3c does. A device can still send
more than the requested payload. Flush the leftover bytes from the RX FIFO
so they do not leak into the next transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
The memory allocated for buf is not freed in some of the error paths in
brcmf_sdio_read_control(). Fix that by adding vfree() calls.
[arend: rework as suggested by Johannes] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: copy request headers via a stack buffer for io-uring
The fuse-io-uring transport copies req->in.h out to the ring in
fuse_uring_copy_to_ring() and req->out.h back in fuse_uring_commit().
Both headers live inside the fuse_request slab object, whose cache
(fuse_req_cachep) is created without a usercopy whitelist, so copying
them directly to/from userspace trips CONFIG_HARDENED_USERCOPY and
panics:
usercopy: Kernel memory exposure attempt detected from SLUB object
'fuse_request' (offset 56, size 40)!
kernel BUG at mm/usercopy.c:102!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:usercopy_abort (mm/usercopy.c:90)
Call Trace:
__check_heap_object (mm/slub.c:8268)
__check_object_size (mm/usercopy.c:197 mm/usercopy.c:258 mm/usercopy.c:223)
copy_header_to_ring (fs/fuse/dev_uring.c:618)
fuse_uring_prepare_send (fs/fuse/dev_uring.c:776 fs/fuse/dev_uring.c:785)
fuse_uring_send_in_task (fs/fuse/dev_uring.c:1306)
tctx_task_work_run (io_uring/tw.c:96)
task_work_run (kernel/task_work.c:233)
io_run_task_work (io_uring/tw.h:84)
io_cqring_wait (io_uring/wait.c:278)
__do_sys_io_uring_enter (io_uring/io_uring.c:2685)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Bounce both headers through an on-stack copy so the usercopy touches
stack memory, not the slab object. |
