| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NTFS-3G versions < 2021.8.22, a stack buffer overflow can occur when correcting differences in the MFT and MFTMirror allowing for code execution or escalation of privileges when setuid-root. |
| In NTFS-3G versions < 2021.8.22, when a specially crafted NTFS inode pathname is supplied in an NTFS image a heap buffer overflow can occur resulting in memory disclosure, denial of service and even code execution. |
| In NTFS-3G versions < 2021.8.22, when a specially crafted MFT section is supplied in an NTFS image a heap buffer overflow can occur and allow for code execution. |
| In NTFS-3G versions < 2021.8.22, when specially crafted NTFS attributes are read in the function ntfs_attr_pread_i, a heap buffer overflow can occur and allow for writing to arbitrary memory or denial of service of the application. |
| JFreeChart v1.5.4 was discovered to be vulnerable to ArrayIndexOutOfBounds via the 'setSeriesNeedle(int index, int type)' method. NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| All versions of the package audify are vulnerable to Improper Validation of Array Index when frameSize is provided to the new OpusDecoder().decode or new OpusDecoder().decodeFloat functions it is not checked for negative values. This can lead to a process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Bound VBIOS record-chain walk loops
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
(cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| A vulnerability in the PE file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in PE files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PE content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| A vulnerability in the PESpin file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in PESpin files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PESpin content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| A vulnerability in the 7z file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in 7z files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains 7z content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### byPass command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### 2wayAudio command index-out-of-bound |
| Versions of the package json-2-csv from 3.15.0 and before 5.5.11 are vulnerable to CSV Injection via the preventCsvInjection option which can be bypassed. An attacker can inject formulas into CSV files, which execute when the files are opened in spreadsheet applications. |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### audio command index-out-of-bound |
| containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a vulnerability in the CRI checkpoint import process where it fails to validate the image references specified within a checkpoint image's configuration. An attacker with permissions to create pods can use a crafted checkpoint image to force containerd to pull a malicious image and assign it an arbitrary local tag, thereby poisoning the node's local image cache. Subsequently, if other pods on the same node attempt to use the poisoned tag with an IfNotPresent (or Never) pull policy, they will unknowingly execute the attacker's malicious image instead of the legitimate one. This can lead to a compromise of the affected pods, allowing the attacker to execute arbitrary code under the victim pod's identity. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. |
| Missing validation of "valuesFrom" references in Helm Deployer of SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 could be used by owners of one tenant to access fleet credentials of other tenants. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES
Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the
uwtable annotation for functions, but not for the module. This means
that compiler-generated functions such as 'asan.module_ctor' do not
receive the uwtable annotation.
When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot
failures because the dwarf information emitted for the kasan
constructors is wrong, which causes the SCS boot patching code to
patch the constructor in an illegal manner. Specifically, the paciasp
instruction is patched, but the autiasp instruction is not. This
mismatch leads to a crash when the constructor is called during boot.
==================================================================
BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90
Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1
Specifically the faulting instruction is the (*fn)() to invoke the
constructor in do_ctors() of the init/main.c file.
Once the fix lands in rustc, this flag can be made conditional on the
rustc version. Note that passing the flag on a rustc with the fix
present has no effect.
[ The fix [1] has landed for Rust 1.98.0 (expected release on
2026-08-20).
Thus add a version check as discussed.
- Miguel ]
[ Adjusted link and comment. - Miguel ] |
| Pion DTLS is a Go implementation of Datagram Transport Layer Security. Versions prior to 3.1.4 are vulnerable to Remote Denial of Service via panic while parsing a crafted ECDHE_PSK ServerKeyExchange message. This issue has been fixed in version 3.1.4. |
