| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: clamp eeprom debugfs read to bytes actually received
picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte
supplied by the device in its REPORT_EE_DATA reply -- clamped only to
the caller's read() count:
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
It never checks resp->raw_size, the number of bytes picolcd_raw_event()
actually copied into the 64-byte raw_data[] of the kmalloc'd struct
picolcd_pending. A device (or a spoofed picoLCD) returning a length byte
of 0xff, read with a count >= 255, makes copy_to_user() read past
raw_data[] into adjacent slab memory and return it to userspace through
the debugfs "eeprom" file:
BUG: KASAN: slab-out-of-bounds in _copy_to_user
Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd]
The debug-dump path in the same file already validates the device length
byte against the received size before trusting it; this read does not.
The file is created S_IRUSR (root-only) and a crafted device is needed,
so it is neither unprivileged- nor remotely-triggerable.
Clamp the copy length to resp->raw_size - 3 (the payload actually
received, minus the 3-byte header), floored at 0 for short replies. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guard preserves the probe-failure balancing,
where io_started is still set after hid_device_io_start(), while
staying silent on the normal removal path. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Initialize ei->children and ei->list in init_ei()
eventfs_create_dir() allocates the eventfs_inode and initializes it with
init_ei(). But this does not initialize the eventfs_inode list_heads. If
the eventfs_create_dir() fails due to memory pressure, it will call
free_ei() before it initialized the lists, and that checks to make sure
the eventfs_inode has no children. But because the list wasn't
initialized, it will give a false warning.
Fix it by moving the list initialization into init_ei().
[ Rewrote change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Rate limit statfs() handler
Ravi reports that statfs() may be called by unprivileged users on the
efivarfs mount point, which may result in a flood of calls to the
QueryVariableInfo() runtime service. These calls are disproportionately
costly on x86 systems where the variable store is backed by SMM, as each
SMM entry requires a rendez-vous of all the CPUs.
So rate limit the calls to QueryVariableInfo() at twice per second, and
return the most recently obtained value for calls that are elided. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: Fix stale object mask after concurrent mark updates
When a mark gets a new event bit, fanotify and inotify may avoid
recalculating the object mask if the cached aggregate already contains that
bit. This is racy with a recalculation triggered by a concurrent update to
another mark on the same connector.
The concurrent scan can read the mark before the new bit is added, while
the updater reads the old aggregate before that scan publishes its result.
The updater then skips recalculation and the scan publishes a mask without
the bit, leaving the object mask stale after both updates complete.
This can be reproduced with two fanotify groups watching the same inode:
one thread removes FAN_MODIFY from one existing mark while another thread
adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return,
writes can fail to produce FAN_MODIFY for the group whose mark now contains
the bit. This was reproduced on an unmodified v6.12.95 kernel. The
equivalent inotify interleaving loses IN_MODIFY events.
For normal fanotify additions, recalculate whenever the raw mark mask
changes. The normal mask is not cleared asynchronously, so an unchanged
addition cannot introduce missing interest. Always recalculate ignore-mask
updates because FS_MODIFY handling may clear the ignore mask without taking
mark->lock, making snapshot comparisons unreliable.
Always recalculate after updating an existing inotify watch. Its replace
path temporarily sets mark->mask to zero, so a concurrent scan can observe
zero even when the old and final masks are equal. Assigning the replacement
mask directly would avoid the transient zero, but existing-watch updates
are infrequent, so unconditional recalculation is simpler. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix NULL dereference and integer overflow in rocket_job_push()
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: initialize job domain before cleanup paths
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at all. The destination reads into
(or writes from) exactly the same pages as the source bio, so the bio can
simply clone the source's biovec with bio_alloc_clone() and remap it to
the target device. The clone inherits the source's iterator and alignment,
and the block layer splits it to the target's limits on submission, so the
whole region maps to a single cloned bio with no manual page copying or
sector accounting.
This removes the per-page copy path (and its open-coded bvec dpages
helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to
a dm-mirror device. Page-list, vma and kmem sources keep the existing copy
path. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check need_resched() when skipping busy checkpoint buffers
journal_shrink_one_cp_list() skips busy checkpoint buffers when called
with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also
skips the need_resched() check at the end of the loop body.
Consequently, when a checkpoint list contains mostly busy buffers, the
shrinker can walk the entire list while holding journal->j_list_lock,
even when a reschedule has been requested. Large checkpoint lists under
memory pressure can therefore cause long lock hold times and leave other
CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls.
Route the busy-buffer path through the need_resched() check so that the
shrinker can release j_list_lock and reschedule promptly, restoring
parity with the clean-buffer path, which already checks need_resched().
This does not change which checkpoint buffers are eligible for removal. |
| In the Linux kernel, the following vulnerability has been resolved:
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0.
Jump to the existing drop label instead. It frees the skb and still
returns 0, so the packet keeps being reported as consumed, which is what
we want here: the outer header has already been pulled, and neither the
remaining handlers nor an ICMP unreachable have any use for it.
Triggering this needs an ipip or mplsip tunnel in collect_md mode and an
atomic allocation failure, which is why it has gone unnoticed. |
| In the Linux kernel, the following vulnerability has been resolved:
params: fix charp corruption on allocation failure
param_set_charp() stores charp parameters in allocated memory after slab is
available, and releases the previous value when the parameter is updated.
The previous value is released before the replacement allocation succeeds.
If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter
left as NULL.
Failing zswap's compressor update before zswap is initialized can later
trigger:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:strcmp+0x10/0x30
Call Trace:
zswap_setup+0x3b1/0x490
zswap_enabled_param_set+0x5b/0xa0
param_attr_store+0x93/0xe0
module_attr_store+0x1c/0x30
kernfs_fop_write_iter+0x116/0x1f0
Allocate and copy the replacement first, then replace the parameter value
only after allocation succeeds. |
