| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rustls-webpki versions before 0.103.10 and 0.104.0-alpha.5 contain faulty CRL authority-matching logic that compares only the first distributionPoint against each CRL's IssuingDistributionPoint, ignoring additional distributionPoints. Attackers with a compromised trusted issuing authority can present revoked certificates that pass revocation checks under UnknownStatusPolicy::Allow, or cause incorrect errors under the default deny policy. |
| rustls-webpki (the Rust webpki fork used by rustls) versions >= 0.101.0 and prior to 0.103.12 and 0.104.0-alpha.6 incorrectly accepted permitted-subtree DNS name constraints for certificates asserting a wildcard name. For example, a name constraint of accept.example.com was treated as satisfied by a certificate for *.example.com, which could feasibly assert reject.example.com — a name outside the permitted subtree. Because name constraints are restrictions applied to otherwise properly issued certificates, the issue is only reachable after signature verification succeeds and requires a misissued wildcard certificate to exploit. |
| ArcadeDB before 26.9.1 (com.arcadedb:arcadedb-engine <= 26.8.1) fails to bind the authenticated principal onto the DatabaseAsyncTransaction async worker threads used by the parallel edge-connect phase of POST /api/v1/batch/{database}. Because those workers have no current user, LocalDatabase.checkPermissionsOnFile returns early and allows the write, bypassing per-type CREATE_RECORD/UPDATE_RECORD ACL enforcement. In deployments that rely on per-type or per-group ACLs, an authenticated low-privilege user holding CREATE_RECORD on an edge type E but with CREATE_RECORD/UPDATE_RECORD revoked on a vertex type V can submit a graph edge-load batch request (with parallelFlush at its default value of true) and durably append edges to protected vertices of type V by writing records into V's <V>_out_edges/<V>_in_edges buckets, resulting in unauthorized modification of graph adjacency. Setting parallelFlush=false causes the request to be correctly rejected. This is an incomplete fix of GHSA-c23x-pqcj-7hfm, which bound the principal only on the HTTP handler thread. |
| vLLM versions before 0.28.0 fail to validate the lower bound of token IDs in the /v1/embeddings and /pooling endpoints, allowing unauthenticated attackers to crash the engine by submitting negative token IDs. A single request with a negative token ID triggers a CUDA device-side assertion that poisons the GPU context, causing all subsequent requests to fail until the process restarts. |
| ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a policy bypass in the PCD (and, per the upstream advisory, CUBE and HALD) coder: when a specific command line option is supplied, the decoder does not check a configured resource limit, which can result in extra memory allocation. A local user able to pass command line options to ImageMagick can therefore exceed the intended memory policy limit, causing a limited availability impact. The issue is fixed in 7.1.2-31 and 6.9.13-56. |
| SOGo before 5.12.11 constructs password-reset links using the client-supplied Origin header as the authority, allowing unauthenticated attackers to redirect recovery tokens to attacker-controlled domains. Attackers can submit password recovery requests with a malicious Origin header to have valid password-reset tokens mailed to victim recovery addresses within links pointing to attacker infrastructure, enabling account takeover. |
| Grandstream GWN7660ELR before firmware version 1.0.27.6 contains an information disclosure vulnerability that allows unauthenticated remote attackers to obtain sensitive system information by querying the SNMP v2c service configured with the default community string 'public'. Attackers can query standard MIBs over the SNMP port to retrieve operating system and kernel version, running process names and command-line arguments, network interface configuration, routing table entries, ARP table mappings, active TCP connection details, and file system paths, enabling detailed reconnaissance of the device and adjacent network infrastructure. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: virtio_pmem: refcount requests for token lifetime
KASAN reports slab-use-after-free in __wake_up_common():
BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160
Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux
1.17.0-2-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x6d/0xb0
print_report+0x170/0x4e2
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __virt_addr_valid+0x1dc/0x380
kasan_report+0xbc/0xf0
? __wake_up_common+0x114/0x160
? __wake_up_common+0x114/0x160
__wake_up_common+0x114/0x160
? __pfx__raw_spin_lock_irqsave+0x10/0x10
__wake_up+0x36/0x60
virtio_pmem_host_ack+0x11d/0x3b0
? sched_balance_domains+0x29f/0xb00
? __pfx_virtio_pmem_host_ack+0x10/0x10
? _raw_spin_lock_irqsave+0x98/0x100
? __pfx__raw_spin_lock_irqsave+0x10/0x10
vring_interrupt+0x1c9/0x5e0
? __pfx_vp_interrupt+0x10/0x10
vp_vring_interrupt+0x87/0x100
? __pfx_vp_interrupt+0x10/0x10
__handle_irq_event_percpu+0x17f/0x550
? __pfx__raw_spin_lock+0x10/0x10
handle_irq_event+0xab/0x1c0
handle_fasteoi_irq+0x276/0xae0
__common_interrupt+0x65/0x130
common_interrupt+0x78/0xa0
</IRQ>
virtio_pmem_host_ack() wakes a request that has already been freed by the
submitter.
This happens when the request token is still reachable via the virtqueue,
but virtio_pmem_flush() returns and frees it.
Fix the token lifetime by refcounting struct virtio_pmem_request.
virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an
extra reference once the request is queued. The completion path drops the
virtqueue reference, and the submitter drops its reference before
returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Clear queue->active_job when v3d_fence_create() fails
The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming
job to queue->active_job before calling v3d_fence_create(). If
v3d_fence_create() fails, the callback returns NULL without clearing
active_job, leaving a dangling pointer.
Create a failure path in all run_job() callbacks that clears the active
job before returning NULL. The BIN path takes queue->queue_lock around the
clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD
paths have no concurrent reader, so the clear is lock-free. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup
vddInd and vddcInd fields from VBIOS-parsed tables are used to index into
voltage lookup tables without a bounds check. Return -EINVAL when any
index is out of range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in plane reset function
amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
corruption or missed completions.
Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Add refcounting to user ring MRs
Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings
by bumping the MR's refcount upon association. |
