Export limit exceeded: 390809 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390809 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89645 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same failure path drops that count to 0 before mount fails. | ||||
| CVE-2026-89644 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map leak in NOCOW direct I/O write btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an extent map reference that must be dropped on all exit paths. For direct writes into a NOCOW range, btrfs_get_blocks_direct_write() keeps using that extent map and asks btrfs_create_dio_extent() to allocate the ordered extent. If that fails, for example because btrfs_alloc_ordered_extent() fails, the function returns the error without dropping the input extent map. The PREALLOC path avoided this by dropping the input extent map before replacing it with the newly created one. Check the error from btrfs_create_dio_extent() before replacing the map and drop the input extent map on failure. | ||||
| CVE-2026-89642 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range. | ||||
| CVE-2026-89628 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: clamp eeprom debugfs read to bytes actually received picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte supplied by the device in its REPORT_EE_DATA reply -- clamped only to the caller's read() count: ret = resp->raw_data[2]; if (ret > s) ret = s; if (copy_to_user(u, resp->raw_data+3, ret)) It never checks resp->raw_size, the number of bytes picolcd_raw_event() actually copied into the 64-byte raw_data[] of the kmalloc'd struct picolcd_pending. A device (or a spoofed picoLCD) returning a length byte of 0xff, read with a count >= 255, makes copy_to_user() read past raw_data[] into adjacent slab memory and return it to userspace through the debugfs "eeprom" file: BUG: KASAN: slab-out-of-bounds in _copy_to_user Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd] The debug-dump path in the same file already validates the device length byte against the received size before trusting it; this read does not. The file is created S_IRUSR (root-only) and a crafted device is needed, so it is neither unprivileged- nor remotely-triggerable. Clamp the copy length to resp->raw_size - 3 (the payload actually received, minus the 3-byte header), floored at 0 for short replies. | ||||
| CVE-2026-89625 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer: ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB completion ghl_magic_poke_cb() re-arms the timer with mod_timer(). sony_remove() drained the timer with timer_delete_sync() and then freed the URB with usb_free_urb(): timer_delete_sync(&sc->ghl_poke_timer); usb_free_urb(sc->ghl_urb); timer_delete_sync() does not block re-arming, and while the URB is in flight the timer is not pending, so the sync delete is a no-op. A URB completion that runs after the delete re-arms the timer, and usb_free_urb() only drops a reference -- it does not kill an in-flight URB. sc is allocated with devm_kzalloc() and freed once sony_remove() returns, so the re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a use-after-free from timer softirq. This is a disconnect/rmmod race. Poison the URB first, then shut the timer down, before freeing the URB. usb_poison_urb() kills any in-flight URB and permanently rejects further submissions, so a poke timer that is still pending cannot re-submit the URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs. usb_kill_urb() would not suffice: it only cancels the in-flight URB and leaves it submittable once it returns, so the pending timer could re-submit it and put a fresh URB in flight over the freed sc. timer_shutdown_sync() then drains any last callback and blocks re-arming. The probe error path is unaffected: it is only reached before the timer is armed. Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds and arms the poke timer, the poke URB is held in flight, the driver is unbound (freeing sc), then the URB is released. The completion re-arms the timer on the freed sc, and the re-armed timer fires ~8 s later: BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0 Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0 ghl_magic_poke+0x98/0xb0 call_timer_fn+0x35/0x2b0 __run_timers+0x69c/0x9a0 run_timer_softirq+0x173/0x2a0 Allocated by task 169: sony_probe Freed by task 338: devres_release_group <- hid_device_remove (sony_remove) Found by 0sec (https://0sec.ai) using automated source analysis. | ||||
| CVE-2026-89623 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 3.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: stop device IO before hid_hw_stop Quiesce device IO at the start of the devm cleanup callback mcp2221_hid_unregister() so that incoming HID reports cannot race with hardware teardown during probe failure or device removal, addressing a potential use-after-free. Guard the call to hid_device_io_stop() with io_started. On normal removal hid_device_remove() has already cleared io_started before the devres group is released, so an unconditional call would otherwise hit the !io_started path and emit a spurious "io already stopped" warning on every removal. The guard preserves the probe-failure balancing, where io_started is still set after hid_device_io_start(), while staying silent on the normal removal path. | ||||
| CVE-2026-89618 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ] | ||||
| CVE-2026-89604 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivileged users on the efivarfs mount point, which may result in a flood of calls to the QueryVariableInfo() runtime service. These calls are disproportionately costly on x86 systems where the variable store is backed by SMM, as each SMM entry requires a rendez-vous of all the CPUs. So rate limit the calls to QueryVariableInfo() at twice per second, and return the most recently obtained value for calls that are elided. | ||||
| CVE-2026-89598 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2 stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables x_tables autofs4 [ 258.129215] Preemption disabled at: [ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340 [ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C 6.6.0-rc5-rockchip-rk356x #4 [ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT) [ 258.129243] Call trace: [ 258.129245] dump_backtrace+0xa0/0x128 [ 258.129252] show_stack+0x20/0x38 [ 258.129256] dump_stack_lvl+0x60/0xb0 [ 258.129265] dump_stack+0x18/0x28 [ 258.129269] __schedule_bug+0xa0/0xc8 [ 258.129274] __schedule+0x9ac/0xd30 [ 258.129279] schedule+0x60/0x100 [ 258.129282] schedule_timeout+0x194/0x338 [ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498 [ 258.129296] rk3x_i2c_xfer+0x20/0x60 [ 258.129300] __i2c_transfer+0x194/0x648 [ 258.129308] i2c_transfer+0x9c/0x130 [ 258.129313] i2c_transfer_buffer_flags+0x64/0x98 [ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb] [ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb] [ 258.129343] soft_cursor+0x13c/0x210 [ 258.129350] bit_cursor+0x2dc/0x550 [ 258.129354] fbcon_cursor+0xec/0x108 [ 258.129359] hide_cursor+0x44/0xc8 [ 258.129365] vt_console_print+0x398/0x3b0 [ 258.129370] console_flush_all.isra.0+0x17c/0x410 [ 258.129377] console_unlock+0x4c/0x100 [ 258.129382] vprintk_emit+0x1c8/0x340 [ 258.129386] vprintk_default+0x40/0x58 [ 258.129389] vprintk+0xb8/0xd0 [ 258.129392] _printk+0x68/0x98 [ 258.129398] watchdog_release+0x170/0x230 [ 258.129404] __fput+0xbc/0x288 [ 258.129409] __fput_sync+0x58/0x70 [ 258.129413] __arm64_sys_close+0x40/0x90 [ 258.129419] invoke_syscall+0x4c/0x118 [ 258.129426] el0_svc_common.constprop.0+0x48/0xf0 [ 258.129432] do_el0_svc+0x24/0x38 [ 258.129437] el0_svc+0x48/0x100 [ 258.129443] el0t_64_sync_handler+0xc0/0xc8 [ 258.129448] el0t_64_sync+0x190/0x198 [ 258.573087] ------------[ cut here ]------------ [ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871 preempt_count_sub+0x9c/0x148 [ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp ---truncated--- | ||||
| CVE-2026-89595 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new event bit, fanotify and inotify may avoid recalculating the object mask if the cached aggregate already contains that bit. This is racy with a recalculation triggered by a concurrent update to another mark on the same connector. The concurrent scan can read the mark before the new bit is added, while the updater reads the old aggregate before that scan publishes its result. The updater then skips recalculation and the scan publishes a mask without the bit, leaving the object mask stale after both updates complete. This can be reproduced with two fanotify groups watching the same inode: one thread removes FAN_MODIFY from one existing mark while another thread adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return, writes can fail to produce FAN_MODIFY for the group whose mark now contains the bit. This was reproduced on an unmodified v6.12.95 kernel. The equivalent inotify interleaving loses IN_MODIFY events. For normal fanotify additions, recalculate whenever the raw mark mask changes. The normal mask is not cleared asynchronously, so an unchanged addition cannot introduce missing interest. Always recalculate ignore-mask updates because FS_MODIFY handling may clear the ignore mask without taking mark->lock, making snapshot comparisons unreliable. Always recalculate after updating an existing inotify watch. Its replace path temporarily sets mark->mask to zero, so a concurrent scan can observe zero even when the old and final masks are equal. Assigning the replacement mask directly would avoid the transient zero, but existing-watch updates are infrequent, so unconditional recalculation is simpler. | ||||
| CVE-2026-89592 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix NULL dereference and integer overflow in rocket_job_push() rocket_job_push() allocates a temporary array to hold all input and output GEM object pointers: bos = kvmalloc_array(job->in_bo_count + job->out_bo_count, sizeof(void *), GFP_KERNEL); memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *)); memcpy(&bos[job->in_bo_count], job->out_bos, ...); Two bugs exist: 1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and the subsequent memcpy() dereferences it, causing a kernel NULL pointer dereference. 2. Integer overflow: in_bo_count and out_bo_count are both u32, set directly from userspace-supplied in_bo_handle_count and out_bo_handle_count with no prior validation. Their sum is computed in u32 arithmetic and can wrap to a smaller value, causing the allocation count passed to kvmalloc_array() to be smaller than intended. Subsequent uses still operate on the original counts when copying and locking objects, which may lead to out-of-bounds accesses on the temporary array. Fix by using check_add_overflow() to detect count overflow before the allocation, and adding a NULL check on the allocation result. | ||||
| CVE-2026-89591 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: initialize job domain before cleanup paths rocket_ioctl_submit_job() releases rjob through rocket_job_put() on allocation error paths. rocket_job_cleanup() unconditionally calls rocket_iommu_domain_put(job->domain), but job->domain is assigned only after task copying and BO lookups. A failure before that assignment can therefore clean up a job with a NULL domain pointer. Take the per-file domain reference before the first error path can release rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so the common cleanup path cannot free the task array again after a task-copy error. | ||||
| CVE-2026-89590 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels] | ||||
| CVE-2026-89582 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp->init_ops, bp->init_data and bp->init_ops_offsets in its error path without setting them to NULL. The cleanup function bnx2x_release_firmware() frees the same three pointers unconditionally, so if init_firmware fails and release_firmware is later called (e.g. from __bnx2x_remove or through the function state machine), all three are freed a second time. Set each pointer to NULL after kfree() in the error path so that the subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. | ||||
| CVE-2026-89578 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-io: clone the source bio instead of copying its biovec For DM_IO_BIO requests, do_region() built each destination bio by walking the source bio's biovec and re-adding the pages one at a time, tracking the remaining transfer in sectors. The vector lengths are byte granular and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split across pages), so the sector-based accounting could lose a sub-sector fragment: to_sector() truncated the remainder and the outer loop spun forever submitting empty bios, hanging the I/O. There is no need to rebuild the biovec at all. The destination reads into (or writes from) exactly the same pages as the source bio, so the bio can simply clone the source's biovec with bio_alloc_clone() and remap it to the target device. The clone inherits the source's iterator and alignment, and the block layer splits it to the target's limits on submission, so the whole region maps to a single cloned bio with no manual page copying or sector accounting. This removes the per-page copy path (and its open-coded bvec dpages helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to a dm-mirror device. Page-list, vma and kmem sources keep the existing copy path. | ||||
| CVE-2026-89576 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the live superblock refcount and then dm_tm_shadow_block() allocates a new block for the metadata snapshot. If the subsequent dm_sm_inc_block() of writeset_tree_root or era_array_root fails, the function only unlocks the clone and returns. The newly allocated shadow block is never returned to the metadata space map, so each failed take-snap permanently leaks one metadata block. Free the clone with dm_sm_dec_block() on those error paths, matching the final step of metadata_drop_snap(). | ||||
| CVE-2026-89575 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space for the termination NUL after the maximum 20 decimal digits of a long long value to avoid buffer overflow in sprintf(). | ||||
| CVE-2026-89572 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix OPP table cleanup apple_soc_cpufreq_init() adds OPP tables from firmware, but some failure paths do not remove them. The driver also uses dev_pm_opp_remove_all_dynamic(), which is not the right cleanup helper for OPP tables loaded from firmware. Use the cpumask OPP helper after the policy CPU mask has been populated. Pair it with the matching cpumask remove helper on failure paths and in apple_soc_cpufreq_exit(). This also removes the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask helper loads the DT OPP tables for all CPUs in the policy. | ||||
| CVE-2026-89568 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kho: fix size calculation in kho_preserved_memory_reserve() kho_preserved_memory_reserve() calculates the size of a preservation by doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it can only be shifted by 31. That is, it will only work for preservations up to 2 GiB. Larger preservations will trigger undefined behaviour. While preservations larger than 2 GiB can't be obtained via folios currently, they can be obtained via kho_preserve_pages(). For example, memblock reserve_mem uses kho_preserve_pages(). Reservations larger than 2 GiB are valid and will trigger this bug if properly aligned. Fix it by using 1UL for shifting. | ||||
| CVE-2026-89567 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for every buffer examined, including busy buffers. Pass NULL from checkpoint cleanup paths so their existing full-list behavior is preserved. This restores the scan-budget semantics that existed before journal_shrink_one_cp_list() was changed to always scan a complete checkpoint list. | ||||