| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: Synchronize timeout work during SQ teardown
nvmet_auth_sq_free() cancels auth_expired_work with
cancel_delayed_work(). If the work has already started, cancellation does
not wait for the callback. Transport teardown can consequently free or
reuse the queue containing struct nvmet_sq while
nvmet_auth_expired_work() still accesses that SQ.
Add a teardown-specific helper that synchronously drains the delayed work
before freeing authentication state, and use it from nvmet_sq_destroy().
Keep the non-synchronous helper for in-band authentication state cleanup,
where the SQ owner remains alive. |
| reNgine through 2.2.0 contains an authorization bypass vulnerability in the GetFileContents API endpoint that allows any authenticated user to read bundled recon tool configuration files. Attackers with low-privilege Auditor roles can access files containing third-party API keys for services like SecurityTrails, Shodan, Censys, VirusTotal, BinaryEdge and Hunter by querying the endpoint without role-based permission checks. |
| Hippo4j through 1.5.0 contains a server-side request forgery vulnerability in four ThreadPoolController endpoints that fail to validate the clientAddress parameter. Authenticated attackers can supply arbitrary hostnames and ports to trigger outbound GET requests to internal networks and cloud metadata services. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvmet_tcp_try_recv_pdu() reads a PDU header into the fixed 128-byte
queue->pdu union, then computes the remaining payload length as
queue->left = hdr->hlen - queue->offset + hdgst;
and reads that many more bytes into &queue->pdu + queue->offset, without
ever bounding the result against sizeof(queue->pdu).
A struct nvme_tcp_icreq_pdu is itself 128 bytes, exactly the size of the
union. Once a header digest has been negotiated (hdgst = 4), a second
ICReq passes the hlen == nvmet_tcp_pdu_size() check but yields
queue->left = 128 - 8 + 4 = 124, so bytes 8..132 are written into the
128-byte buffer -- 4 bytes past its end, over queue->hdr_digest and
queue->data_digest. Those bytes are attacker-controlled (an ICReq
carries no digest), and the duplicate ICReq is only rejected later,
after the overflow. A remote unauthenticated host can thus corrupt
kernel memory adjacent to the receive buffer.
Reject any PDU whose declared length would read past the end of
queue->pdu before the second recv. |
| TDuck survey form through version 5.0 contains an authorization bypass vulnerability in the POST /user/form/data/update endpoint that allows authenticated users to overwrite other users' form submission data. Attackers can discover submission identifiers allocated in narrow ranges and modify arbitrary form responses containing personal data by sending update requests without ownership validation. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: reject unsolicited H2CData PDUs
nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking
that its TTAG is a valid in-range command index and that the command's
data buffers are mapped. It never checks that the target has actually
solicited that data by sending an R2T for the command.
A remote host can abuse this. It submits a write command that takes the
R2T path and, before the target transmits the R2T, sends an H2CData PDU
for that command's tag. The data completes the command early, and when
the command then fails synchronously (e.g. a length mismatch caught by
nvmet_check_transfer_len()), it is completed a second time. Each
completion calls nvmet_tcp_queue_response(), so the same command is added
to queue->resp_list twice while it is still linked; the second llist_add()
makes the node point to itself (lentry->next == lentry).
nvmet_tcp_process_resp_list() then walks that self-referential node and
adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this
trips the "list_add double add" check (kernel BUG); without it the loop
never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is
remotely triggerable and needs no authentication on an allow_any_host
subsystem.
Track whether an R2T has been transmitted for a command and reject an
H2CData PDU that arrives before it. The flag is cleared on command reuse
(nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple
H2CData PDUs of a single solicited transfer. |
| Rallly before 4.15.0 contains an information disclosure vulnerability in the polls.get tRPC procedure that returns scheduled-event invitee names and email addresses to unauthenticated callers. Attackers can access a poll's urlId from public invite links to retrieve sensitive invitee information regardless of privacy settings. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: avoid out-of-bounds writes for compound folios
migrate_device_range() and migrate_device_pfns() clear the entries
following a compound folio so that the PFN arrays retain their
page-granular representation.
If a compound folio extends beyond the end of the caller-provided range,
the loops clear all following folio entries without limiting them to the
number of slots remaining in the npages-sized array, causing an
out-of-bounds write.
Do not proceed with a compound folio if its page-granular representation
does not fit entirely in the remaining PFN array. If this happens, drop
any reference and lock acquired for the folio, clear the remaining
entries, and stop collecting.
Observed with a KASAN x86 QEMU kernel using the HMM migrate_anon_huge_zero
selftest. Closing /dev/hmm_dmirror0 after migrating an anonymous huge
page to device memory exercises:
dmirror_fops_release()
-> dmirror_device_evict_chunk()
-> migrate_device_range() |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: reject an arena whose nfree is below the lane count
The BTT info block's nfree field, the number of reserve free blocks, is
read from the medium without validation. btt_freelist_init() and
btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree,
but the I/O path indexes them by the lane from nd_region_acquire_lane(),
which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree.
A crafted or foreign arena whose nfree is below the lane count makes
freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write.
btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the
code does not currently honor: num_lanes is ND_MAX_LANES regardless of
nfree. Reject an arena whose nfree is below num_lanes at discovery,
before the per-lane arrays are allocated, enforcing that invariant. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: fix wrong addr_pfn tracking in compound vmemmap population
vmemmap_populate_compound_pages() uses addr_pfn to determine the PFN
offset within a compound page and to decide whether the current vmemmap
slot should be populated as a head page mapping or should reuse a tail
page mapping.
However, addr_pfn is advanced manually in parallel with addr. The loop
itself progresses in vmemmap address space, so each PAGE_SIZE step in addr
covers PAGE_SIZE / sizeof(struct page) struct page slots. Since addr_pfn
is compared against nr_pages in data-PFN units, it should advance by the
same number of PFNs. The existing manual increments do not match that and
therefore do not reliably track the PFN corresponding to the current addr.
As a result, pfn_offset can be computed from the wrong PFN and the code
can make the head/tail decision for the wrong compound-page position.
Fix this by deriving addr_pfn directly from the current vmemmap address
instead of carrying it as loop state. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm()
In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to
&matrix_mdev->pqap_hook before the update locks are acquired and the
mdev list is checked for a conflicting assignment. If another mdev is
already attached to the same KVM instance, the function returns -EPERM
without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook
pointing at the failing matrix_mdev instead of the mdev that legitimately
owns the KVM.
Since matrix_mdev->kvm is never set on this error path,
vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev
is later closed. If matrix_mdev is subsequently freed, any PQAP
instruction executed by the guest will dereference the stale pointer
through pqap_hook_rwsem, resulting in a use-after-free.
Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm()
function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check
for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine
whether it belongs to another mdev. This will alleviate the need to iterate
the matrix_dev->mdev_list list to see if the kvm object is assigned to
another mdev.This was introduced in v3 to alleviate the need to take the
mdevs_lock while iterating the list; however, this did not prevent a
potential race condition.
The pqap_hook_rwsem(write) is now performed inside
get_update_locks_for_kvm(), which is updated to acquire
pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering
is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem
in read mode while srcu is held under vcpu->mutex, establishing the
dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read).
The pqap_hook_rwsem is now released inside the
release_update_locks_for_kvm(), which is updated to release
pqap_hook_rwsem(write) between mdevs_lock and kvm->lock.
Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved
after release_update_locks_for_kvm(). Previously it was called while
kvm->lock was held; if it were ever the last reference, kvm_destroy_vm()
would run under kvm->lock, which would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
The vfio_ap_config_remove function uses the bitmap_andnot function to clear
bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains
assigned to the mdev). This prevents the explicitly unplugged control
domains from being removed the KVM guest. The bitmap_and function is used
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of
bitmap_andnot() to determine whether the guest APCB needs to be updated.
However, bitmap_andnot() returns false when the resulting destination
bitmap is empty. This means that if the only adapter, domain or control
domain assigned to an mdev is removed from the host's AP configuration,
the bit is correctly cleared from the shadow APCB, but bitmap_andnot()
returns false because the result is an empty bitmap. Consequently,
do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called,
leaving the KVM guest with stale hardware access to the unplugged AP
devices.
Fix this by replacing the bitmap_andnot() return value check with
bitmap_intersects() to determine whether the shadow APCB actually
overlaps with the removal mask. If there is an intersection, call
bitmap_andnot() solely for its side effect of clearing the bits, then
unconditionally set do_hotplug to trigger the guest APCB update. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: afs: validate v2 image info bounds
The AFS v2 parser uses footer[8] to locate the image information block
inside the current erase block, then uses the image information
region_count to walk entries from a fixed local array. The footer offset
and region count come from flash contents and are not checked against the
erase block or the local image-info array before use.
Reject v2 entries whose image information offset would underflow the
erase block calculation, and reject region counts that cannot fit in the
local image-info array before walking region entries. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix stale receive device on merged fragments
Fragment reassembly reuses the skb from the highest-numbered buffered
fragment as the merged packet. When that fragment was received on a hard
interface which is deleted before the chain completes, the merged skb can
re-enter the receive path with a stale skb->dev and skb_iif.
batadv_batman_skb_recv() passes such merged packets through the normal
receive handlers again. DAT and bridge loop avoidance both derive the ARP
header length from skb->dev, so they can dereference the freed net_device
before the packet reaches the local mesh interface.
Refresh the receive device metadata from the current receive device before
running the packet handlers. This keeps internally reinjected merged
fragments consistent with the normal receive path after hard interface
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: align gxbb_32k_clk_sel number of parents with actual count
The following out-of-bounds read has been observed by Christian on a
GXBB WeTek Hub:
==================================================================
BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418
Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT
Hardware name: WeTek Hub (DT)
Call trace:
show_stack+0x14/0x20 (C)
dump_stack_lvl+0x74/0x94
print_report+0x164/0x4b0
kasan_report+0x98/0xd8
__asan_report_load8_noabort+0x1c/0x24
__clk_register+0x1b70/0x2418
devm_clk_hw_register+0x74/0x15c
meson_clkc_init+0xd4/0x20c
meson_clkc_syscon_probe+0x5c/0x94
platform_probe+0xbc/0x17c
really_probe+0x184/0x844
__driver_probe_device+0x154/0x35c
driver_probe_device+0x60/0x188
__driver_attach+0x168/0x4a0
bus_for_each_dev+0xec/0x180
driver_attach+0x38/0x58
bus_add_driver+0x238/0x4c0
driver_register+0x150/0x388
__platform_driver_register+0x54/0x7c
gxbb_clkc_driver_init+0x18/0x20
do_one_initcall+0xb8/0x340
kernel_init_freeable+0x49c/0x52c
kernel_init+0x24/0x148
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
gxbb_32k_clk_parents+0x60/0x400
The buggy address belongs to a vmalloc virtual mapping
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9
>ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
^
ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9
ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9
==================================================================
Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock
parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel
mux but didn't adjust the hard-coded num_parents field. Fix the actual
number of parents of that mux by using ARRAY_SIZE instead (avoiding
similar problems in future). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: loongson: Fix error handling in ACPI property parsing
In loongson_card_parse_acpi(), the return value of
device_property_read_string() for the `codec-dai-name` property was
ignored. If the property is missing or invalid, an uninitialized pointer
would be used later, potentially leading to undefined behavior.
Fix this by checking the return value and propagating the error
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix potential use-after-free in anonymous buffer release
An anonymous buffer handle holds a reference to the underlying IIO device.
The reference is dropped in the buffer handle's release function. If the
device has been removed, either through unbind or hot-unplug, the buffer
handle might hold the last reference.
The release function takes the mutex for the buffer using a guard, which
means the unlock happens after all the code in the function, including
`iio_device_put()`. If the anonymous buffer holds the last reference this
might free both the IIO device and the buffer, which contains the mutex,
leading to use-after-free when the mutex is unlocked.
Fix this by using a scoped guard just around the buffer dmabuf list access,
making sure the mutex is unlocked before releasing the IIO device.
Version 10 of the patch that introduced this issue used this exact scheme
of first unlocking and then dropping the reference [1]. During review it
was suggested to use a guard instead, and version 11 made that change [2]. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Make IIO DMA fence release RCU-safe
The `dma_fence` documentation states that if a custom release
implementation is provided, the `dma_fence` object must be freed in an
RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`,
which might result in a use-after-free.
Remove the custom `release` implementation. This makes the DMA fence core
fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence.
This requires that the fence be the first member of `struct iio_dma_fence`.
Using the default release method for extended DMA fence structures is a
common pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Tie IIO dma fence lock lifetime to the fence
The `iio_dma_fence` implementation currently uses a lock embedded in the
`iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the
`iio_dmabuf_priv`, which can cause a use-after-free.
Tie the lifetime of the lock to the lifetime of the fence by embedding them
in the same struct.
We can't just hold a reference to the `iio_dmabuf_priv` from the
`iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the
fence release callback is not allowed to sleep.
Note that the `dma_fence` framework now has an internal lock that gets used
when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to
allow this patch to be backportable use an external lock. |
