| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, the enterprise Google Chrome device-trust stages advance the flow without confirming that the out-of-band device attestation actually ran. Affected enterprise deployments place either a Google Chrome Endpoint stage with mode set to REQUIRED or the deprecated Google Chrome Device Trust Connector stage in an authentication flow. The device attestation occurs in a verification iframe that calls the Google Verified Access API and records the verified device on success, but the vulnerable stages treat the flow as passed as soon as the stage is submitted. An attacker who can reach such a stage, including after primary username and password authentication, can skip the verification iframe and authenticate from a device that was never verified. Where device trust is the only additional factor, that protection is fully bypassed, while other configured factors remain in force. This issue is fixed in versions 2026.2.6 and 2026.5.5. |
| Eclipse Kura versions prior to 5.6.2 trust the client-supplied X-Forwarded-For HTTP header as the authoritative source of the client IP address in audit log entries. The org.eclipse.kura.web2 (Web Console) and org.eclipse.kura.rest.provider (REST API) components use this header as the primary IP source when initializing audit context, and org.eclipse.kura.jetty.customizer unconditionally installs Jetty's ForwardedRequestCustomizer on all HTTP/HTTPS connectors, causing HttpServletRequest.getRemoteAddr() to reflect the attacker-controlled header value. An unauthenticated remote attacker can exploit this vulnerability to bypass IP-based brute-force protections — such as fail2ban — by spoofing the logged IP address to a non-routable value, allowing a brute-force attack to proceed undetected, or to cause a denial of service against a third party by injecting a victim's IP address and triggering a ban on that address. |
| A vulnerability was detected in Alaev SEO Tools Extension up to 1.0.10 on Chrome. This impacts the function addDiv of the file src/popup.html of the component Popup UI. Performing a manipulation results in basic cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| HTML Injection in the public subscription form in maalfer MailerUp before 1.1.3 allows unauthenticated remote attackers to have the application send a message carrying arbitrary HTML, to an attacker-chosen address and from the form owner's configured sending identity, via the first_name field of the subscription request, which is interpolated unescaped into the double opt-in verification email. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| A flaw has been found in Webkul Bagisto up to 2.4.4. The affected element is an unknown function of the file /customer/register of the component Customer-Registration Notification Email. This manipulation of the argument first_name/last_name causes basic cross site scripting. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| XSS vulnerability in Markdown handling in Apache Allura.
This issue affects Apache Allura: from 1.10.0 before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| XSS vulnerability in code display in Apache Allura.
This issue affects Apache Allura: before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: check the number of BDs needed for xdp_frame
The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the
number of fragments contained in xdp_frame may be greater than or equal
to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr
to be out of bounds. |
| A reflected cross-site scripting issue exists in URL handling. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: validate firmware interface structure sizes
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| rsync before 3.5.0 contains an improper path handling vulnerability that allows a malicious sender to expand the scope of --delete operations beyond the intended destination subtree by sending a crafted file list that causes rsync to reclassify implied parent directory entries or treat synthetic paths as the transfer root. Attackers can exploit multiple variants including implied parent reclassification, synthetic root path construction, legacy protocol behavior below version 30, and non-directory root handling to cause the receiver to delete files outside the authorized destination directory. |
| OAuth2 sign-in reactivates an administrator-deactivated account on auth sources without refresh tokens (incomplete fix of #38009) |
| llama.cpp builds b1283 through b9058 contain an integer overflow vulnerability in the llama_batch_init() function where unchecked multiplications in malloc() calls can wrap past INT32_MAX when computing allocation sizes. Attackers can pass specially crafted parameters to trigger integer overflow, causing heap corruption and potentially achieving arbitrary code execution through subsequent batch operations that write past allocated buffer boundaries. |
