| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The HTTPPasswordMgr class in the urllib.request module, along with its subclasses HTTPPasswordMgrWithDefaultRealm and HTTPPasswordMgrWithPriorAuth, did not take the URL scheme into account when matching stored credentials against a requested URL. Credentials added for an https:// URL were also used for requests to the same host over http://, so an attacker able to redirect or downgrade a client to plain HTTP (for example, via an HTTPS-to-HTTP redirect or an on-path position) could capture credentials in cleartext. Credentials added for http:// URLs could likewise be sent over https://.
Credential matching is now scoped by URL scheme. Credentials registered with a URL that includes a scheme are only used for requests with the same scheme. Credentials registered with a bare authority (such as example.com or example.com:8080) continue to match any scheme, preserving compatibility with existing code, including proxy authentication.
Users who cannot upgrade immediately can mitigate by ensuring that applications never make plain http:// requests to hosts for which credentials are registered, for example by not following redirects to http:// URLs. |
| A security flaw has been discovered in lin-snow Ech0 up to 5.4.1. Affected by this issue is the function MD5Encrypt of the file internal/util/crypto/crypto.go. Performing a manipulation results in risky cryptographic algorithm. Remote exploitation of the attack is possible. The complexity of an attack is rather high. The exploitation is known to be difficult. Upgrading to version 5.4.2 can resolve this issue. The patch is named 9ce19a3b0d0765086a655f45d3a706ec1810404f. It is recommended to upgrade the affected component. |
| In versions below 2.1.4 of the Venafi app for Splunk SOAR, a user who holds a role with permission to run actions could expose keystore and private-key passwords by invoking the get certificate action, because the action's keystore_password and password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.2.1 of the Splunk Attack Analyzer Connector for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking either the detonate file or detonate url action, because the action's archive_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.0.5 of the RSA SecurID Authentication Manager app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive token serial by invoking either the enable token or revoke token action, because the action's token_serial parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 3.8.5 of the Phantom app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking the deflate item action, because the action's password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.5.2 of the MS Graph for Active Directory app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive password by invoking the reset password action, because the action's temp_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 5.1.3 of the CrowdStrike OAuth API app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive document password by invoking either the detonate file or detonate url action, because the action's document_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.2.1 of the Cisco Webex app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive meeting password by invoking the schedule meeting action, because the action's password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| stigmem-node contains an insecure default configuration vulnerability that allows federation traffic to traverse networks without mTLS protection when non-loopback endpoints are enabled. Operators who explicitly disabled mTLS while binding federation to non-loopback addresses expose federation traffic to cleartext interception and man-in-the-middle attacks. |
| In versions below 3.2.2 of the Zoom app for Splunk SOAR, a user who holds a role with permission to run actions could expose meeting and personal meeting ID passwords by invoking one of the create meeting, update meeting, or update user settings actions, because the affected password and pmi_password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.1.9 of the AWS IAM app for Splunk SOAR, a user who holds a role with permission to run actions could expose sensitive AWS credentials by invoking an action that accepts the credentials parameter, because the parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.5.3 of the Azure AD Graph app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive password by invoking the reset password action, because the action's temp_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.4.5 of the Cisco Secure Malware Analytics app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive sample password by invoking the detonate file action, because the action's sample_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| Missing encryption of sensitive data in Smart Switch prior to version 3.7.72.6 allows adjacent attackers to intercept transmitted data. |
| Cleartext storage of sensitive information in Smart Switch prior to version 3.7.72.6 allows adjacent attackers to access sensitive data. |
| Apache Airflow's secrets masker did not mask `var.json` Variable values whose value is a dict in the Rendered Templates UI — the dict value failed an `isinstance(str)` guard — so a secret stored as a JSON Variable and referenced in a template via `var.json` was displayed in cleartext to any user with access to that task's Rendered Templates view. Users are advised to upgrade to apache-airflow 3.3.1 or later, which masks nested Variable values regardless of type. |
| A flaw has been found in mangroup dtale up to 3.22.0. This vulnerability affects the function build_secret_key of the file dtale/app.py of the component Flask Session Cookie. This manipulation causes insufficiently random values. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to access sensitive user data. |
| Cleartext Transmission of Sensitive Information (CWE-319) in a component used in the Gallagher Hanwha VMS and Gallagher NxWitness VMS integrations allows unprivileged users with local network access to view live video streams.
This issue affects all versions of Gallagher NxWitness VMS integration prior to 9.10.017 and Gallagher Hanwha VMS integration prior to 9.10.025. |
