Export limit exceeded: 390740 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390740 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390740 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89563 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit() ip6_tnl_xmit() may need to expand headroom before it can push the outer IPv6 and optional encap headers. It currently does that with skb_realloc_headroom(), copies skb->sk ownership, consumes the original skb, and then continues processing with the replacement skb kept only in its local variable. That is safe only if the helper cannot fail afterwards. But this helper still has post-reallocation error exits. collect_md tunnels reject non-NONE encap after the replacement, and ip6_tnl_encap() can also fail later. In those cases the helper returns an error to its callers while the caller still only has the original skb pointer. Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on error, so they can end up freeing an skb that ip6_tnl_xmit() already consumed. Use skb_cow_head() instead. It provides the required headroom and writability without privately replacing the caller-owned skb, so later error returns cannot leave callers with a stale pointer. The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING and already call skb_cow_head() before entering ip6_tnl_xmit(). They do not rely on the removed skb_shared() reallocation. This also makes the IPv6 tunnel path consistent with ip_tunnel_xmit(). | ||||
| CVE-2026-89562 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumulates the lower device's hardware header length into dev->hard_header_len whenever header_ops is set. This is incorrect for both users of header_ops. ip6gretap and ip6erspan have a fixed Ethernet hardware header length. For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header, the optional FOU or GUE header, and the outer IPv6 header. The lower device header is headroom needed later, not part of the tunnel device's hardware header. Keep the lower device header in needed_headroom. Set hard_header_len to the tunnel header length only for ARPHRD_IP6GRE devices with header_ops, and leave the fixed Ethernet header length unchanged for tap and erspan devices. | ||||
| CVE-2026-89560 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation Whiteout objects are used in the upper layer of an OverlayFS to indicate that the file with this name does not exist in the unified view, even if it is present in one of the lower layer file systems. For the userspace implementations of OverlayFS (fuse-overlayfs), whiteout objects can be created from userspace as well: * mknod(2) with S_IFCHR and makedev(0, 0) * renameat2(2) with RENAME_WHITEOUT, creating the whiteout in the old place of the moved file. This commit guards whiteout creation in both of these cases with LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered character devices and are not bound to a driver. LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a whiteout object: creating one is the only S_IFCHR creation that the VFS exempts from CAP_MKNOD, so it is as unprivileged as creating a regular file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that expose a kernel interface [1]. For the mknod(2) case, introduce a Landlock erratum. The creation of whiteout objects through mknod(2) was previously guarded using LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using LANDLOCK_ACCESS_FS_MAKE_REG. For the renameat2(2) case, fix a bug: Before this commit, renameat2(2) with RENAME_WHITEOUT would create a directory entry even when all LANDLOCK_ACCESS_FS_MAKE_* rights were denied. This does not affect normal renames within layered OverlayFS mounts: When doing a regular rename() on a mounted fuse-overlayfs, it is the fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT, and only the Landlock domain of that daemon is checked there. Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories") Depends-on: fe72ce6710cb ("landlock: Add errata documentation section") [mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and add link(2) to the user doc] | ||||
| CVE-2026-89559 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() The on-media namespace index field nslot is a u32 read from the DIMM label storage area. __nd_label_validate() bounds it against the config area size, but sizeof_namespace_label() returns unsigned, so the product nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before the comparison. A crafted nslot passes the bound and is then used as the loop trip count in nd_label_data_init(), whose memset() walks off the end of the config_size buffer: an out-of-bounds write. The field is not trusted -- it comes from the medium, or from userspace via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound check is exact; conforming labels are unaffected. The check was safe when introduced by commit 4a826c83db4e ("libnvdimm: namespace indices: read and validate"): it multiplied by sizeof(struct nd_namespace_label), a size_t, so on a 64-bit build the product did not wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label definitions") narrowed it to 32 bits when the label size became a runtime value read via sizeof_namespace_label(). | ||||
| CVE-2026-89558 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix still_degraded being inverted in raid10_sync_request() Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into bitmap_operations") converted still_degraded from int to bool, but inverted the assignment in the loop that checks whether the array will still be degraded after the current device is recovered: "still_degraded = 1" became "still_degraded = false". As a result, recovering a device while another mirror is still missing calls md_bitmap_start_sync() with degraded == false, which clears bitmap bits that the still-missing device needs. When that device is re-added, its bitmap-based recovery finds the bits already cleared and skips every region written while the array was degraded, so it is marked In_sync while holding stale data: silent corruption. Reproducer (raid10 near=2, 4 disks, internal bitmap): - fail and remove one disk of each mirror pair - write to the degraded array - re-add both disks and let recovery finish - "check" reports mismatch_cnt=262272 after 256 MiB of degraded writes and file contents differ; the second disk's "recovery" completes in milliseconds because everything is skipped The same conversion in raid1 got it right (still_degraded = true). Restore the correct value. | ||||
| CVE-2026-89557 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on- disk superblock. It is used for badblocks API badblocks_set() by the following sequence, 1930 rdev->badblocks.shift = sb->bblog_shift; 1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) { 1932 u64 bb = le64_to_cpu(*bbp); 1933 int count = bb & (0x3ff); 1934 u64 sector = bb >> 10; 1935 sector <<= sb->bblog_shift; 1936 count <<= sb->bblog_shift; 1937 if (bb + 1 == 0) 1938 break; 1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1)) 1940 return -EINVAL; 1941 } bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for an invalid bb->bblog_shit, it is possible to make sector be overflowed by the following calculation, 1935 sector <<= sb->bblog_shift; Then in turn when call badblocks_set() at line 1939 with the invalid rdev->badblocks.shift set at line 1930, may result an overflow inside _badblocks_clear() in block/badblocks.c. Although there are many places to call badblocks APIs, the non-zero shift value is only used in super_1_load(), other places always use 0 as the shift value. Therefore it is unnecessary to do a general shift value overflow check inside badblock API, and just check here as the caller. This may avoid unnecessary check, make the badblocks API code more simple and elegant. | ||||
| CVE-2026-89555 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: reload header after pskb_may_pull() mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop when an MPLS route has multiple nexthops. While walking the MPLS label stack, the hash routine caches hdr for the current label. After finding the bottom-of-stack label, it calls pskb_may_pull() before reading the inner IP header. If an skb is constructed with the inner IP header in nonlinear data and insufficient tailroom in the linear head, pskb_may_pull() calls pskb_expand_head() to replace the skb head and free the old one. This leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr again when it performs a second pull for the larger header. The issue was found through static analysis. A reproducer sending a legal Geneve packet through a bareudp/MPLS multipath setup triggered the same KASAN report in 2 of 2 unpatched runs: BUG: KASAN: slab-use-after-free in mpls_select_multipath Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23 Call Trace: mpls_select_multipath mpls_forward __netif_receive_skb_list_core netif_receive_skb_list_internal napi_complete_done gro_cell_poll __napi_poll net_rx_action Freed by task 23: kfree pskb_expand_head __pskb_pull_tail mpls_select_multipath Reload hdr from the current skb head after each successful pull before deriving the inner IPv4 or IPv6 header pointer. | ||||
| CVE-2026-89553 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gem: reserve the bo in the info ioctl around the vma lookup In the non-uvmm path, there could be a race between the info lookup finding the vma, and the gem close path closing the vma leading to a use-after-free. Spotted with the help of Opus 4.6. | ||||
| CVE-2026-89552 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: params: fix charp corruption on allocation failure param_set_charp() stores charp parameters in allocated memory after slab is available, and releases the previous value when the parameter is updated. The previous value is released before the replacement allocation succeeds. If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter left as NULL. Failing zswap's compressor update before zswap is initialized can later trigger: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0x10/0x30 Call Trace: zswap_setup+0x3b1/0x490 zswap_enabled_param_set+0x5b/0xa0 param_attr_store+0x93/0xe0 module_attr_store+0x1c/0x30 kernfs_fop_write_iter+0x116/0x1f0 Allocate and copy the replacement first, then replace the parameter value only after allocation succeeds. | ||||
| CVE-2026-89550 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: enforce krb5 token minimum length svcauth_gss_unwrap_priv() validates only an upper bound on the wire-supplied opaque length before handing the buffer to gss_unwrap(): if (len > xdr_stream_remaining(xdr)) goto unwrap_failed; offset = xdr_stream_pos(xdr); ... maj_stat = gss_unwrap(ctx, offset, offset + len, buf); The wire value `len` flows unchanged as the upper bound into the krb5 unwrap path, so a len in [0, 16] passes this check and is handed to gss_unwrap(). For a krb5 v2 context that lands in gss_krb5_unwrap_v2(), which reads the 16-byte RFC 4121 token header fields at ptr+4 and ptr+6 and then calls rotate_left() before any integrity check. With a sub-header length the header reads run past the token, and _rotate_left()'s `shift %= buf->len` path can divide by zero when buf->len has been driven to zero by the truncated token. A header-only token (len == 16) is equally invalid: with a non-zero RRC field and the opaque blob ending at the XDR buffer boundary, rotate_left() builds a zero-length subbuffer, reaching the same division. Reject the token at the server entry point before it reaches the krb5 unwrap core. A valid sealed RFC 4121 token must contain the 16-byte header plus at least some encrypted payload. Fix by adding a minimum-length check immediately after the existing upper-bound check: if (len <= GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; | ||||
| CVE-2026-89547 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Check svc pool percpu counter allocation __svc_create() initializes three per-pool percpu_counter stats and ignores every return value. On SMP, percpu_counter_init() fails when __alloc_percpu_gfp() cannot satisfy the allocation, leaving the failed counter with fbc->counters == NULL and its embedded raw_spinlock_t, list_head, and count never initialized. __svc_create() returns the half-constructed svc_serv to nfsd, lockd, or the NFS callback service anyway. Once that service is live, the hot-path increments in svc_xprt_enqueue(), svc_handle_xprt(), and svc_pool_wake_idle_thread() reach a counter whose backing pointer is NULL. The pointer is a per-cpu offset, so the access does not fault: it resolves to offset zero of the current CPU's per-cpu area and silently corrupts whatever variable lives there. A /proc/fs/nfsd/pool_stats read walks the same NULL per-cpu storage and returns garbage, and on CONFIG_DEBUG_SPINLOCK or lockdep it splats on the never-initialized lock. Creating the broken service requires a percpu allocation failure during RPC server startup, so it is reachable only by a local administrator under memory pressure or fault injection; a remote peer cannot induce the bad state on its own. Check each percpu_counter_init() return value in __svc_create() and fail when an allocation fails, unwinding the counters already set up in the current pool and in every pool initialized before it. A discrete percpu_counter_destroy() per counter at teardown frees each per-cpu allocation exactly once. | ||||
| CVE-2026-89546 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: close backchannel before destroying callback service A backchannel receive can complete a request while the NFS callback service is being torn down. xprt_complete_bc_request() removes the request from bc_pa_list, drops bc_alloc_count, marks the request in use, and then asks xprt_enqueue_bc_request() to hand it to the callback service. If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request() currently returns without enqueueing or freeing the committed request. The xprt_get() taken on entry is leaked as well. If the producer wins the race before bc_serv is cleared, it can also enqueue onto sv_cb_list after nfs_callback_down() has stopped the callback threads, leaving the request linked to a svc_serv that is about to be freed. Close the producer side before callback threads are stopped. Add xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call it on callback shutdown and callback-start failure before stopping the service threads. Requests that lose the NULL transition in xprt_enqueue_bc_request() are released through the normal backchannel free path after balancing bc_slot_count. Finally, drain any remaining sv_cb_list requests after the callback threads have stopped and before svc_destroy() frees the service. | ||||
| CVE-2026-89545 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed. | ||||
| CVE-2026-89544 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. | ||||
| CVE-2026-89543 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir Normal client creation goes through rpc_setup_pipedir(), which records clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event() calls rpc_setup_pipedir_sb() directly and never refreshes that field. The umount path also removes the directory without clearing clnt->pipefs_sb. After a late pipefs mount or any remount, rpc_clnt_remove_pipedir() compares the current superblock against a stale pipefs_sb pointer and skips cleanup, leaving pipefs dentries whose inode private data still points at a freed rpc_clnt, leading to a potential use-after-free during subsequent rpc_info_open() or rpc_show_info() calls. Fix this by properly updating clnt->pipefs_sb upon mount events and clearing it during unmount or failure paths. | ||||
| CVE-2026-89542 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_krb5_unwrap_v2 against short tokens gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN (16) bytes long, and its rotate_left() helper passes buf->len - base to xdr_buf_subsegment() without verifying that base <= buf->len. When a caller hands in a sub-16-byte token, or a token whose declared len leaves base past the end of the buffer, three distinct failures follow: gss_krb5_unwrap_v2(offset, len, buf) ptr = buf->head[0].iov_base + offset ec = *(ptr + 4) /* OOB read on short head */ rrc = *(ptr + 6) /* OOB read on short head */ rotate_left(offset + 16, buf, rrc) xdr_buf_subsegment(buf, &subbuf, base, buf->len - base) /* u32 wrap when base > len */ _rotate_left(&subbuf, shift) shift %= buf->len /* divide-by-zero when base == len */ After decryption, the cleanup arithmetic has the same shape: movelen = min_t(unsigned int, buf->head[0].iov_len, len); movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip; BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen > buf->head[0].iov_len); The BUG_ON re-adds the value just subtracted, so it reduces to min(A, B) > A and is permanently false; it cannot catch the unsigned underflow of movelen, which then drives a ~UINT_MAX-byte memmove(). Add four defense-in-depth guards inside the unwrap core so it is safe regardless of what its callers validate: - reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before touching ptr+4/ptr+6; - bail from rotate_left() when buf->len <= base, covering both the underflow and zero-length cases; - return early from _rotate_left() when buf->len is zero, so the shift %= buf->len modulo cannot fault; - replace the dead BUG_ON with a live check that returns GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. | ||||
| CVE-2026-89541 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_unwrap_resp_priv length checks gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with offset = (u8 *)(p) - (u8 *)head->iov_base; if (offset + opaque_len > rcv_buf->len) goto unwrap_failed; maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, offset + opaque_len, rcv_buf); Both operands are u32 and the sum is computed in u32. A reply with opaque_len near 0xffffffff makes offset + opaque_len wrap to a small value that is below rcv_buf->len, so the bound check passes and gss_unwrap() is called with end < begin. The check also lacks a lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt header reads at ptr+4 and ptr+6 then run past the token. A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the rotate_left() loop that follows. Fix by replacing the single combined check with three guards that are safe in u32 arithmetic and that enforce the RFC 4121 minimum outer token length: if (offset > rcv_buf->len) goto unwrap_failed; if (opaque_len > rcv_buf->len - offset) goto unwrap_failed; if (opaque_len < GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; The first guard makes the subtraction in the second guard unconditionally safe; offset is derived from a successful xdr_inline_decode() in the head kvec, so in practice it already satisfies the bound. The floor mirrors the server-side check added in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token minimum length"). | ||||
| CVE-2026-89540 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: init gssp_lock before publishing proc entry create_use_gss_proxy_proc_entry() publishes /proc/net/rpc/use-gss-proxy via proc_create_data() before init_gssp_clnt() runs mutex_init() on sn->gssp_lock. Once the dentry is linked under proc_subdir_lock it is immediately reachable from userspace, so a write that lands in the window drives set_gssp_clnt() into mutex_lock() on a zero-initialized struct mutex. create_use_gss_proxy_proc_entry(net) proc_create_data("use-gss-proxy", ...) /* dentry live */ init_gssp_clnt(sn) mutex_init(&sn->gssp_lock) /* too late */ write_gssp() set_gssp_clnt(net) mutex_lock(&sn->gssp_lock) /* uninitialized */ gssp_rpc_create(...) sn->gssp_clnt = clnt mutex_unlock(&sn->gssp_lock) The window spans only the two statements between proc_create_data() returning and init_gssp_clnt(), so a writer reaches it only if the registering thread is preempted there while another task is already opening the freshly published file. register_pernet_subsys() runs in preemptible context under pernet_ops_rwsem, so that preemption is possible, and the window widens on auth_rpcgss module load, when the proc entry is created for every live net namespace whose tasks are already running. A writer that wins the race locks a zero-filled struct mutex. On CONFIG_DEBUG_MUTEXES the missing magic value trips a "lock used without init" splat; on a production kernel the fast path acquires the lock via CMPXCHG(owner, 0, current). In the latter case a second writer that arrives before init_gssp_clnt() re-zeroes owner can enter set_gssp_clnt() concurrently, shut down the first writer's clnt while it is still in use, and leak the loser's clnt. Fix by initializing sn->gssp_lock in sunrpc_init_net() so its lifetime matches the sunrpc_net it lives in. sn->gssp_clnt is already NULL from the kzalloc that backs net_generic storage, so the lazy helper is no longer needed; drop init_gssp_clnt(), its prototype, and the call from create_use_gss_proxy_proc_entry(). sunrpc.ko is a build-time dependency of auth_rpcgss.ko, so sunrpc_init_net() has always run on every netns before any auth_gss pernet init can publish the proc entry. | ||||
| CVE-2026-89538 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->len to a logical length, which can be much smaller than head[0].iov_len (the allocated receive-page capacity). It then calls xdr_buf_trim() with a trim length derived from the 16-bit "extra count" (ec) field in the Kerberos v2 token header. The ec field is authenticated by the post-decrypt memcmp() against the encrypted header copy, so a randomly-mutated value is rejected. However, any peer holding a valid GSS context can legitimately encrypt a token whose ec exceeds the plaintext length. Per RFC 4121, such a token is structurally malformed. Although xdr_buf_trim() now clamps the buf->len subtraction to avoid unsigned underflow, the buffer is still left in a semantically invalid state (zero length, inconsistent iov lengths) when ec is oversized. Reject these tokens before calling xdr_buf_trim(), giving callers a well-defined GSS_S_DEFECTIVE_TOKEN error and keeping the xdr_buf internally consistent. The wrapped blob begins at a nonzero offset -- both callers pass len as offset + opaque_len -- so buf->len still counts the offset bytes that precede the blob. Compare the trim length against the remaining wrapped segment, buf->len - offset, rather than the whole buffer; comparing against buf->len alone leaves an offset-wide window in which an oversized ec passes the test and xdr_buf_trim() cuts into the bytes ahead of the blob. | ||||
| CVE-2026-89537 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2 gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags byte at ptr[2], and padding at ptr[3..7], then passes ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg(). None of these accesses check read_token->len first. The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers accept shorter tokens from the wire: - gss_unwrap_resp_integ() enforces only an upper bound (offset + len <= rcv_buf->len) before allocating mic.data = kmalloc(len) and passing it to gss_verify_mic(). A malicious NFS server can therefore supply a short checksum opaque, producing a small slab allocation that the Kerberos MIC verifier reads past. - gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400) before passing the wire-supplied length to gss_validate_seqno_mic(), which constructs a mic xdr_netobj and calls gss_verify_mic(). - svcauth_gss_verify_header() enforces only checksum.len >= XDR_UNIT (4 bytes) before dispatching to gss_verify_mic(). - svcauth_gss_unwrap_integ() checks only that the checksum fits in gsd->gsd_scratch. Add a length guard at the top of gss_krb5_verify_mic_v2(), before any ptr[] access or scatterlist construction. Well-formed MIC tokens from gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN + cksum_len bytes, so valid traffic is unaffected. | ||||