Export limit exceeded: 413267 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413267 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98658 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: proximity: aw96103: validate firmware data length The firmware parser reads a length from the binary header and then uses it to walk six-byte register/value entries. A truncated firmware image can make the parser read beyond the copied firmware buffer. A value smaller than the four-byte count field also underflows, producing a very large length. Read the little-endian field with get_unaligned_le32(), as previously proposed by David Lechner. Validate the header size, reject an underflowed length, ensure the resulting payload is contained in the firmware image, and require it to contain whole register/value entries. | ||||
| CVE-2026-98653 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix _gaccess_shadow_fault() In some circumstances, it is possible that the page of nested guest memory that is being shadowed is not present at all in the parent guest gmap. dat_entry_walk() will not find any leaf entry and return with -ENOENT, which will erroneously be propagated all the way to userspace. Fix by manually calling gmap_link() on the memory of the nested guest that is being shadowed if the mapping was not already present. | ||||
| CVE-2026-98652 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm->srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state(). | ||||
| CVE-2026-98651 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes. | ||||
| CVE-2026-98650 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix potential races in dat skey functions When dat_cond_set_storage_key() finds a large page, it will conditionally set the storage key in absolute memory using large_crste_to_phys() to get the absolute address. There is a race window between dat_entry_walk() and large_crste_to_phys(): the large page could have been split concurrently, and large_crste_to_phys() might be called with a crste that does not designate a large page, leading to crashes. Similar issues were also present in dat_set_storage_key(). dat_get_storage_key() and dat_reset_reference_bit() did instead check for a potential concurrent splitting of the large page, but then handled it incorrectly. Fix by performing a READ_ONCE on the crste pointer, checking and using the result, instead of dereferencing the pointer again. In case a race is detacted, try dat_entry_walk() again. | ||||
| CVE-2026-98649 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times. | ||||
| CVE-2026-98648 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/uv: Prevent potential out-of-bounds read When the system has more than 85 secrets, the uv_secret_list struct array only holds up to 85 items per page, resulting in an out of bounds read in find_secret_in_page if the targeted secret is in the next page or not stored at all. Fix this by looping over the number of stored secrets which is the per sub-list count of stored secrets and not the overall count. | ||||
| CVE-2026-98646 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 </TASK> The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there. | ||||
| CVE-2026-98639 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Config word last. Since the consumer is an external agent on coherent shared memory, use WRITE_ONCE() to stop the compiler from reordering the stores and smp_wmb() to make the parameter words globally visible before the Pending bit is set. | ||||
| CVE-2026-98638 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve() pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl() and the WARN_ON() there, which is fatal at EL2. The existing !sve_state_size test rejects such a length, but only after the macro has run. Check sve_vl_valid() before deriving the state size. A valid length cannot yield a zero size, so the !sve_state_size test goes with it. | ||||
| CVE-2026-98637 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE, which is left set. Later vCPUs on that VM then skip the SVE setup and register with a NULL sve_state, which the guest's first FP access hands to sve_load_state(). Return the error without touching vcpu_features. | ||||
| CVE-2026-98636 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size is 0) is mounted, and performs shift operations using dictionarysize, the shift exponent is -1, causing a shift-out-of-bounds. Detail as below: squashfs_comp_opts(msblk, buffer, length) squashfs_xz_comp_opts() if (comp_opts) n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1 if (opts->dict_size != (1 << n) && opts->dict_size != (1 << n) + (1 << (n + 1))) <----shift-out-of-bounds Fix it by adding a dictionary size range check before the shift operation. | ||||
| CVE-2026-98635 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: block: Fix zones_cond out-of-bounds write on zone report blk_revalidate_disk_zones() sizes the zones_cond array from the disk capacity and zone size, but the index used by blk_revalidate_zone_cond() comes from the device-driven report_zones() walk and is never checked against the array size. A device reporting more zones than fit the array makes blk_zone_set_cond() write out of bounds. One way to reach this is a zone count exceeding 32 bits: both blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 + 1024 zones of one 512-byte logical block) gets its zone count truncated to a small value, undersizing the array while the report walk keeps counting upward. Check the index against the array size before storing the zone condition, and refuse to revalidate when the zone count does not fit 32 bits. | ||||
| CVE-2026-98634 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd_zbc: Reject disks with too many zones sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and stores the result in the unsigned int nr_zones field of struct zoned_disk_info, silently truncating counts that exceed 32 bits. The truncated count is later used to size per-zone resources, while the device may still report more zones than fit. Moreover, sd_zbc_report_zones() counts the reported zones with a signed int zone_idx, which overflows past INT_MAX. Reject devices reporting more than INT_MAX zones at scan time; such a device is not realistic for any medium that exists today, and accepting it produces inconsistent zone bookkeeping. | ||||
| CVE-2026-98633 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP without freeing its skb argument. This leaks the cloned skb and also prevents nxp_set_ind_reset() from being called to perform recovery. Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC)) call with IS_ENABLED(CONFIG_DEV_COREDUMP). | ||||
| CVE-2026-98632 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel In send_cancel(), pending mesh_tx objects are removed from the hdev->mesh_pending list and freed via mesh_send_complete(). However, if a mesh transmission was already queued onto hdev->cmd_sync_work_list via mesh_next(), the queued entry retains a raw pointer to mesh_tx. When hci_cmd_sync_work later processes the entry, it attempts to execute mesh_send_sync and its destroy callback mesh_send_start_complete using the already freed mesh_tx pointer, leading to a use-after-free. Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the target mesh_tx before completing it. If the entry is found and dequeued, its destroy callback will complete and free the object; otherwise, mesh_send_complete() is called directly. Additionally, ensure the transmission queue advances after cancellation or errors. In mesh_send_start_complete(), call mesh_next() on error unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds hdev->cmd_sync_work_lock and calling mesh_next() synchronously would deadlock. Instead, advance the queue in send_cancel() once the lock is released and if no transmission is in progress. | ||||
| CVE-2026-98630 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Fix payload page pool error cleanup The payload page pool pointer contains an error pointer when its allocation fails. The cleanup path passes that error pointer to page_pool_destroy() instead of destroying the header page pool. This can dereference the error pointer and leave the header page pool allocated. Destroy the header page pool instead. | ||||
| CVE-2026-98627 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve packet pointer class displacement in regsafe() regsafe() maps packet pointer IDs between states and checks that each current register range is a subset of the corresponding explored register range. It does not, however, preserve the displacement between registers that share a packet pointer ID. This is unsound because packet range is shared by ID. A bounds check on one class member updates every member, and a later access can consume the range through another member. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") folded the fixed pointer offset into r64 and removed the old off equality check, so two individually narrower registers can prune even when their displacement has changed. The explored path can then license an out-of-bounds packet access on the pruned path. Require matching range bases for packet pointers with an ID. Together with the existing ID mapping, this preserves the displacement between members of each packet-pointer class without adding per-ID state. Packet pointers without an ID remain unaffected. | ||||
| CVE-2026-98626 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Restrict CO-RE poisoning to relocatable instructions CO-RE relocation records can name any instruction offset. When a relocation cannot be resolved, bpf_core_patch_insn() currently poisons its target before checking whether that instruction is a valid relocation target. Malformed metadata can therefore replace jumps, calls, exits, register-source arithmetic, or non-immediate loads instead of failing at the relocation step. Handle poisoning only after the instruction has passed the same class and operand-form checks used for a resolved relocation. Route invalid forms through the existing diagnostic and return a hard error. Keep poisoning supported instructions, including both halves of a plain ldimm64, so an unresolved relocation in dead code remains valid. Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return its status directly from each validated instruction case. This avoids routing the success path through a common label and leaves the helper free to report errors. The shared relocation code applies this restriction to both libbpf and in-kernel CO-RE. | ||||
| CVE-2026-98620 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure If register_netdev() fails for one of the MTK_MAX_DEVS devices in mtk_probe(), the error path jumps to err_deinit_ppe, skipping mtk_unreg_dev(). The previously registered net_devices are then freed by mtk_free_dev() while still in NETREG_REGISTERED state, hitting the BUG_ON(dev->reg_state != NETREG_UNREGISTERED). Route the register_netdev() failure to err_unreg_netdev so the net_devices registered so far are properly unregistered before being freed. | ||||