| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to
sleep waiting for an event. When no setup events are pending, it calls
wait_event_interruptible_exclusive_locked_irq() with the mutex still
held. The wait macro deliberately drops the waitqueue spinlock before
sleeping but does not drop the mutex.
If a userspace daemon is polling ep0 via read() and the gadget is
asynchronously torn down via configfs (e.g., echo "" > UDC), a
deadlock can occur:
1. The configfs teardown calls functionfs_unbind(), which queues a
FUNCTIONFS_UNBIND event.
2. The daemon wakes up, consumes the event, and drops the mutex.
3. However, if the daemon loops and immediately issues another read()
before exiting, it reacquires ffs->mutex and again goes into an
interruptible sleep.
4. Meanwhile, functionfs_unbind() continues execution and attempts to
acquire ffs->mutex to tear down ep0req.
5. The kernel deadlocks because the configfs thread is stuck in an
uninterruptible sleep waiting for the mutex, while the userspace
daemon is in an interruptible sleep holding the mutex forever
because no more events will arrive.
To fix this, we drop both the waitqueue spinlock and ffs->mutex before
going to sleep, and use wait_event_interruptible_exclusive() instead.
Upon waking up, we jump back to the `retry` label to safely reacquire
the mutex and re-evaluate the state machine. By not sleeping with
ffs->mutex held, we natively decouple gadget teardowns (which require
the mutex) from userspace polling. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
sensor_hub_get_feature() clamps its return value to the caller's buffer
size, but the copy loop still copies field->report_size / 8 bytes for
each report value. A malicious HID descriptor can advertise a large
feature field size while an IIO caller supplies a small stack buffer,
such as a single s32, causing an out-of-bounds write.
HID core stores parsed report values in __s32 slots and clamps extracted
values to 32 bits. Reject feature fields that require more than one slot
per value, guard the total byte count calculation, and clamp each
per-value copy to the remaining caller buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()
Patch series "lib/ucs2_string.c: fix out-of-bounds read in
ucs2_strnlen()", v2.
This series fixes an off-by-one out-of-bounds read in ucs2_strnlen().
The first patch is the real fix, the second patch comes as a bonus and
fixes the code indentation.
This patch (of 2):
ucs2_strnlen() checks the current character before checking whether the
caller-provided maximum length has been reached. If the input is not
NUL-terminated within that bound, the loop can read one ucs2_char_t past
the limit.
Test the length before dereferencing to prevent an off-by-one
out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: stm32: prevent out-of-bounds write on RX overflow
stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using
rx_msg.len as the write index, incrementing it on every RXBR
(receive-byte-ready) interrupt without checking it against the buffer
size:
cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct
cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a
completed message (RXEND). The number of bytes received before RXEND is
decided by the remote CEC device (it sets EOM), not by the driver. A
peer that keeps sending bytes without ending the message drives RXBR
repeatedly, pushing rx_msg.len past 16 and writing peer-controlled bytes
out of bounds into the surrounding memory. This is reachable in normal
operation once the driver has probed and receiving is enabled, from the
IRQ thread, without any local privilege.
The length check in the CEC core runs on the consumer side, after the
byte has been stored, so it does not prevent the overflow. Bound the
index in the driver before the store, as the other platform CEC drivers
already do (e.g. tegra_cec), dropping the excess bytes of an overlong
frame.
Found by static analysis tool CodeQL. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation
Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error
in nilfs_direct_propagate() during testing.
Analysis revealed that after truncating a file, a node block immediately
below the B-tree root was not deleted. Instead, it remained in the B-tree
node cache in a dirty state. The log writer subsequently detected this
block and incorrectly invoked nilfs_direct_propagate() on it, which is
designed to handle only data blocks in direct mapping.
B-tree nodes in the cache are managed by virtual block numbers, and their
logical keys typically exceed the range expected by direct mapping.
Consequently, processing such a node as a direct mapping entry triggers
a slab-out-of-bounds access.
The root cause is that when a B-tree mapping collapses into a direct
mapping during truncation, an intermediate node block pointed to by the
root node is left behind as garbage instead of being explicitly deleted.
This resolves the issue by adding a nilfs_btree_discard() operation
to delete the remaining intermediate node block during the conversion.
A 'deform' flag is added to the bop_delete interface to explicitly signal
that the deletion is part of a mapping transformation. This allows the
B-tree mapping implementation to perform the necessary cleanup and
discarding of the residual node structure that would be otherwise be left
orphaned after the transition. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
pci_write_legacy_io() loads 4 bytes from the kernfs write buffer
regardless of how many bytes userspace wrote:
if (count != 1 && count != 2 && count != 4)
return -EINVAL;
return pci_legacy_write(bus, off, *(u32 *)buf, count);
kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1),
so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and
the unconditional u32 load reads up to 2 bytes past the end of the
allocation, which KASAN reports as a slab-out-of-bounds read.
Similarly, a 2-byte write overreads by 1 byte.
Thus, read only the number of bytes requested using get_unaligned_le16()
and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the
buffer as little-endian to match the byte ordering of PCI I/O port
space.
The PowerPC implementation previously compensated for the generic
code's native-endian 32-bit load by shifting the value into place
for the 1 and 2 byte cases. The shifts were only correct on
big-endian kernels.
On little-endian PowerPC (POWER8 and later), they extracted the wrong
bytes, so a 1-byte write wrote an out-of-bounds byte instead of the
requested value. On big-endian, the native load also caused out_le16()
and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte
writes. The little-endian helpers resolve both issues, so the shifts
are removed.
No changes are needed for the Alpha platform.
The legacy_io file is root-only and exists only on Alpha and PowerPC,
the two architectures that define HAVE_PCI_LEGACY. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip-samsung-dcphy: fix out-of-range max_register
The PHY register block is 64KB, so with a register stride of 4 the
last accessible register sits at offset 0xfffc. max_register names
0x10000, one register past the end of the mapping: dumping the
registers through the regmap debugfs interface reads beyond the
ioremapped region and oopses on the unmapped page. The oops fires
with the regmap lock held, so later PHY operations deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: fix out-of-bounds read in signature length check
ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field
before handing the signature payload to verify_pkcs7_signature(), but the
check has the wrong sign:
if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node))
The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ,
64 bytes) into the node, so the payload is at most
snod->len - sizeof(struct ubifs_sig_node)
bytes long. Adding the header size instead of subtracting it accepts a
declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually
holds -- past the end of c->sbuf, which is vmalloc(c->leb_size).
verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder()
is then handed that inflated length and reads beyond the allocation while
walking the DER headers. The node length comes straight from the mounted
image, so a crafted signed UBIFS image reaches this via
ubifs_read_superblock() before the signature is cryptographically checked.
snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner
(c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected
subtraction cannot underflow. Legitimately signed images are unaffected: a
correct superblock never declares a signature longer than the node it is
embedded in. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock
nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with
list_for_each_entry_safe(ni, tmp, ...). For each expired entry it
sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the
source vfsmount, then reacquires the lock to list_del + kfree the
entry and continue iterating via the macro's saved tmp pointer.
The nsui_busy flag protects the current ni from concurrent
nfsd4_ssc_setup_dul() finders during the lock-drop window, but it
does not pin tmp. Another nfsd RPC thread that fails its source-
server mount and reaches nfsd4_ssc_cancel_dul() will, during that
same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount
item, and release the lock. If that item is the saved tmp of the
expire walk, the next iteration dereferences a freed
nfsd4_ssc_umount_item.
Restart the walk from the head after the mntput() unlock window so
no saved next pointer survives the lock-drop. The list is bounded
by the number of active inter-server source mounts (typically small)
and the expire delayed-work runs periodically rather than per-IO,
so the restart is cheap. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check
The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in
fh_verify of directories") details the assumption that justified
adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is
invalid (in the case of NFS reexport).
When NFSD exports an NFS filesystem it is very possible for
nfsd_mode_check() to encounter a @dentry that doesn't have
i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and
NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).
So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir
return on that branch must stay. It guards the subsequent
lookup_one_unlocked() -> __lookup_slow() path, which calls
inode->i_op->lookup() with no NULL check, so returning nfserr_notdir
is what keeps a client LOOKUP into such a @dentry from dereferencing
a NULL method pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path
When the server returns a new layout stateid while a valid one is still
held, pnfs_layout_process() calls pnfs_mark_matching_lsegs_return() on
the on-stack free_me list and jumps to out_forget. Segments whose
reference count drops to zero are unlinked from lo->plh_segs and moved
to free_me by mark_lseg_invalid(); for an idle cached segment the layout
header holds the only reference, so this happens on the first decrement.
out_forget never drains free_me -- only the success path calls
pnfs_free_lseg_list().
Commit 814b84971388 ("pNFS/NFSv4: Fix a layout segment leak in
pnfs_layout_process()") added the drain; commit 08bd8dbe8882
("pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()")
removed it while switching the destination to lo->plh_return_segs, which
is drained elsewhere. Commit fb700ef02676 ("NFSv4.1: Simplify layout
return in pnfs_layout_process()") switched the destination back to
free_me without restoring the drain.
Restore the pnfs_free_lseg_list() call. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd, nfsd: RCU-protect nlmsvc_ops dispatch
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Reset write verifier when async COPY writeback fails
Async COPY captures nn->writeverf at request time and reports it to
the client via CB_OFFLOAD after the worker kthread completes. When
the post-copy vfs_fsync_range() or filemap_check_wb_err() in
_nfsd_copy_file_range() reports an error, the worker correctly
leaves NFSD4_COPY_F_COMMITTED clear so that CB_OFFLOAD encodes
wr_stable_how as NFS_UNSTABLE, but the server's write verifier is
not rotated.
A client that receives NFS_UNSTABLE in CB_OFFLOAD follows up with
COMMIT to make the copied data durable. With the verifier
unchanged, COMMIT returns the same value the client just received
via CB_OFFLOAD, and the client concludes the copy is durable --
silently dropping the data whose writeback in fact failed. This
violates the UNSTABLE+COMMIT durability contract (RFC 7862 section
15.1, RFC 8881 section 18.32) and matches the bug just fixed in
nfsd_vfs_write() and nfsd_commit().
Rotate nn->writeverf at the writeback-failure site. The async COPY
worker has no svc_rqst, so commit_reset_write_verifier() is not
available here; calling nfsd_reset_write_verifier() directly
mirrors the trace-less reset already used by
nfsd_file_check_write_error() for the same purpose. Filter out
-EAGAIN and -ESTALE, matching commit_reset_write_verifier(), since
neither indicates a durable-storage failure. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: sample writeback error cursor before async COPY loop
_nfsd_copy_file_range() samples dst->f_wb_err into "since"
after the copy loop, then uses it to detect writeback errors
via filemap_check_wb_err() once vfs_fsync_range() returns.
Because the nfsd_file cache reuses a single struct file
across requests targeting the same inode, a concurrent
COMMIT or stable WRITE on dst advances dst->f_wb_err to the
current mapping->wb_err via file_check_and_advance_wb_err()
during its own vfs_fsync_range(). If that advancement lands
between the writeback error appearing in mapping->wb_err
and the COPY worker sampling "since", the worker captures
the already-advanced cursor, errseq_check() sees cur ==
since and returns zero, and NFSD4_COPY_F_COMMITTED is set
even though writeback failed. CB_OFFLOAD then encodes
wr_stable_how = FILE_SYNC4, the client treats the copied
data as durable, and the failure becomes silent data loss.
Sample since once at the start of the function. The cursor
then reflects state in effect before this COPY issues any
writes, and filemap_check_wb_err() detects any error that
occurs during the copy regardless of which thread first
observes it. This matches the pattern used by
nfsd_vfs_write() and nfsd4_clone_file_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate nseconds in TIME_DELEG decode paths
The xdrgen-based TIME_DELEG_ACCESS and TIME_DELEG_MODIFY decode arms
store a raw uint32_t nseconds directly into tv_nsec without enforcing
nseconds < NSEC_PER_SEC. The legacy nfsd4_decode_nfstime4 has this
check but the TIME_DELEG paths do not. A malformed timespec can
propagate through notify_change() to disk.
Add range checks in both nfs4xdr.c (SETATTR path) and
nfs4callback.c (CB_GETATTR path). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate symlink target length in NFSv4 CREATE
nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for
NF4LNK symlink targets, allowing a client to force a kmalloc of up to
the maximum RPC payload size (several MiB) per COMPOUND op that persists
until compound teardown. The VFS rejects oversized targets with
ENAMETOOLONG, but the allocation has already occurred.
Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater
than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the
allocation. |
