| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix race of dquot_scan_active() with quota deactivation
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ensure safe access to master conntrack
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd()
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX
path is the only caller of virtio_net_hdr_to_skb() that reads directly
from user-controlled shared memory.
Fix this by copying vnet_hdr from the mmap'd ring buffer to a
stack-local variable before validation and use, consistent with the
approach used in packet_snd() and all other callers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: track the connection owning a byte-range lock
SMB2_LOCK adds each granted byte-range lock to both the file lock list
and the lock list of the connection which handled the request. The
final close and durable handle paths, however, remove the connection
list entry while holding fp->conn->llist_lock.
With SMB3 multichannel, the connection handling the LOCK request can be
different from the connection which opened the file. The entry can
therefore be removed under a different spinlock from the one protecting
the list it belongs to. A concurrent traversal can then access freed
struct ksmbd_lock and struct file_lock objects.
Record the connection owning each lock's clist entry and hold a
reference to it while the entry is linked. Use that connection and its
llist_lock for unlock, rollback, close, and durable preserve. Durable
reconnect assigns the new connection as the owner when publishing the
locks again. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix race between interrupt and resend
After commit f8fce75fedf7 ("fuse: clear intr_entry in fuse_resend and
fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in
fuse_request_free() still triggers due to the following race:
In request_wait_answer()
if (test_bit(FR_SENT, &req->flags)) -> returns true
In fuse_chan_resend()
clear_bit(FR_SENT, &req->flags)
In request_wait_answer()
queue_interrupt(req)
Fix by:
- move clearing FR_SENT inside fpq->lock
- move setting FR_PENDING inside fiq->lock
- recheck FR_SENT after acquiring fiq->lock in fuse_dev_queue_interrupt() |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Properly support implicit ODP rereg_mr
Due to all the child mkeys in the implicit ODP configuration we cannot
change anything in place for the parent mkey. Instead the whole thing
needs to be rebuilt if any change is requested. If the user does not
specify a translation then force the implicit values which will then fall
through the logic into mlx5_ib_reg_user_mr() to allocate a completely new
MR.
Since implicit children were also touching the mr->pd, this removes
another case where the access was racy. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: gr2d/gr3d: Initialize address register map before HOST1X client is registered
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Allocate full pages for {DE,EN}CRYPT ops on SNP-enabled hosts
When {de,en}crypting memory of an SEV or SEV-ES guest on an SNP-enabled
host via a temporary buffer, allocate a full 4KiB page for the buffer to
ensure the page containing the buffer is wholly owned by KVM, i.e. won't
be concurrently allocated and accessed by other kernel code while KVM is
using the buffer to {de,en}crypt memory. On SNP-enabled platforms, when
sending SEV/SEV-ES commands that trigger firmware writes to memory, the
to-be-written page(s) must be (temporarily) assigned to Firmware (as
required by the SNP architecture, to guard against using such commands as
gadgets to attack SNP guests). See snp_map_cmd_buf_desc() and friends.
Unfortunately, transferring ownership of a page to Firmware makes the page
inaccessible to software, and thus writes generate RMP #PF violations. If
KVM uses a sub-page allocation for its temporary buffer, some other actor
in the kernel can allocate and use the other portions of the page, and thus
trigger unexpected (and seemingly spurious) RMP #PF violations due to
software attempting to access a Firmware-owned page.
BUG: unable to handle page fault for address: ffff906ae30f0300
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD 6b1b80d067 P4D 6b1b80d067 PUD 100231e2063 PMD 10055a88063 PTE 80000100630f0163
SEV-SNP: PFN 0x100630f0 unassigned, dumping non-zero entries in 2M PFN region: [0x10063000 - 0x10063200]
Oops: Oops: 0003 [#1] SMP
CPU: 70 UID: 0 PID: 10658 Comm: svw_WaiterThrea Tainted: G U W O 7.1.0-smp--c22293789940-seanjc-next #1 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:memset+0xf/0x20
Call Trace:
<TASK>
__kvmalloc_node_noprof+0x2a4/0x710
do_getxattr+0x4e/0x130
path_getxattrat+0x125/0x1b0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3a22cb6daa
</TASK>
Modules linked in: kvm_amd kvm irqbypass vfat fat ccp k10temp sha3 libsha3 i2c_piix4 gq(O) cdc_acm xhci_pci xhci_hcd
gsmi: Log Shutdown Reason 0x03
CR2: ffff906ae30f0300
---[ end trace 0000000000000000 ]---
RIP: 0010:memset+0xf/0x20
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x39e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
gsmi: Log Shutdown Reason 0x02 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix usage of page_frag_cache
nvme uses page_frag_cache to preallocate PDU for each preallocated request
of block device. Block devices are created in parallel threads,
consequently page_frag_cache is used in not thread-safe manner.
That leads to incorrect refcounting of backstore pages and premature free.
That can be catched by !sendpage_ok inside network stack:
WARNING: CPU: 7 PID: 467 at ../net/core/skbuff.c:6931 skb_splice_from_iter+0xfa/0x310.
tcp_sendmsg_locked+0x782/0xce0
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x8b/0xa0
nvme_tcp_try_send_cmd_pdu+0x149/0x2a0
Then random panic may occur.
Fix that by serializing the usage of page_frag_cache. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xilinx-trng - Remove crypto_rng interface
Implementing the crypto_rng interface has no purpose, as it isn't used
in practice. It's being removed from other drivers too. Just remove
it. This leaves hwrng, which is actually used.
Tagging with 'Cc stable' due to the bugs that this removes:
- xtrng_trng_generate() sometimes returned success even when it didn't
fill in all the bytes.
- It was possible for xtrng_trng_generate() and
xtrng_hwrng_trng_read() to run concurrently and interfere with each
other, as the locking code in xtrng_hwrng_trng_read() was broken. |
| A security flaw has been discovered in ramon-victor freegpt-webui up to 098db3dfeb41555c2ca9269df0f13e10ec1c35dc. This issue affects the function getJailbreak of the file server/config.py of the component Jailbreak Mode. The manipulation results in race condition. It is possible to launch the attack remotely. The attack requires a high level of complexity. The exploitability is assessed as difficult. The exploit has been released to the public and may be used for attacks. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
This patch is a follow-up to commit cf070fe33bfb ("can: isotp: serialize
TX state transitions under so->rx_lock") which addresses following
sashiko-bot findings:
- isotp_sendmsg(): drain so->txfrtimer first so a stale callback can't
re-arm echotimer after the claim
- isotp_release(): wake so->wait after forcing ISOTP_SHUTDOWN so a
sleeping sendmsg() claim isn't stranded
- isotp_sendmsg(): have both wait_event_interruptible() calls in
isotp_sendmsg() also wake on ISOTP_SHUTDOWN and do not return claim to
IDLE to avoid corrupting a concurrent isotp_release() process.
- isotp_sendmsg(): handle potential claim of a new transfer when
the wait_event_interruptible() call returns in CAN_ISOTP_WAIT_TX_DONE
mode. Don't touch timers and states of the new transfer if a new thread
incremented so->tx_gen before getting the lock at err_event_drop.
- isotp_sendmsg(): handle a stuck can_send() and omit timer and state
changes if a new transfer was claimed. wait_tx_done() returns the error
recorded in so->tx_result[], tagged with the caller's own generation.
- isotp_tx_timeout(): on a claimed timeout, record the ECOMM error for
the timed-out transfer's own generation in so->tx_result[]; sk->sk_err
is raised unconditionally, same as every other error path here.
- isotp_tx_gen_done()/isotp_tx_timeout(): always read tx.state (acquire)
before tx_gen - the reverse order let a weakly ordered CPU pair a fresh
tx.state with a stale tx_gen/tx_result slot.
- isotp_sendmsg(): wait_tx_done: drain sk_err via sock_error() once we
have read the result from so->tx_result[], so an already-reported error
doesn't stay latched for a later poll()/SO_ERROR.
Also align the remaining lock-free so->tx.state/rx.state/cfecho accesses
and use skb->hash as unique loopback echo frame indicator. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Order pt_vp_array publish against irqfd assertion path
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: msm: Disable DMA for kernel console UART
At the moment, concurrent writes from userspace and the kernel to the
console can trigger a race condition that results in an infinite loop of
the same messages printed over and over again. This is most likely to
happen during system startup or shutdown when the init system starts/stops
a large number of system services that interact with various kernel code.
When userspace writes to the TTY device, the driver initiates an
asynchronous DMA transfer and releases the port lock. At the same moment,
the kernel printk path might grab the port lock and re-configure the UART
controller for PIO, without waiting for the DMA operation to complete. It
seems like this collision results in zero progress being reported for the
DMA engine, so the same text is printed to the console over and over again.
For the kernel console, we want a reliable output path that will be
functional even during crashes etc. So rather than implementing complex
code to synchronize the kernel console write routines with the userspace
DMA write routines, simply disable DMA for the console UART instance.
Similar checks exist in many other serial drivers, e.g. 8250_port.c,
imx.c, sh-sci.c etc. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix race in mshv_irqfd_deassign
mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list
require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign()
omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(),
which does take the lock before calling mshv_irqfd_deactivate().
Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons
the node pointers rather than resetting them. Since
mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev ==
NULL), a poisoned node still appears active. If a concurrent path calls
mshv_irqfd_deactivate() again on the same irqfd, the guard fails to
prevent a double hlist_del() on poisoned pointers.
Fix both issues:
- Add the missing spin_lock_irq/spin_unlock_irq around the list
traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release().
- Use hlist_del_init() instead of hlist_del() so the node is properly
marked as unhashed after removal, making the is_active guard reliable. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: restore nofs context unconditionally in xfs_trans_roll
When __xfs_trans_commit() fails in xfs_trans_roll(), the NOFS context
is cleared but only restored in the success path. This leaves the
error path without nofs protection, causing a circular lock dependency
between xfs_nondir_ilock_class and fs_reclaim:
CPU0 CPU1
---- ----
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
Fix this by moving xfs_trans_set_context() before the error check so
that nofs context is always restored on the new transaction. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: publish io-uring queues with release semantics
fuse_uring_create_queue() initializes a fuse_ring_queue and then
publishes the pointer into ring->queues[qid] with WRITE_ONCE() under the
fch->lock. There are several readers that may concurrently be fetching
that pointer locklessly and then deferencing it.
WRITE_ONCE() doesn't ensure ordering of the queue's field
initialization before the ring->queues[qid] pointer assignment. The
queue must be published with smp_store_release() so the field
initialization is guaranteed to happen before.
Readers in paths where the read may happen concurrently with the store
need to use READ_ONCE() because any race involving a plain access is
undefined. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - Remove crypto_rng interface
qcom-rng.c exposes the same hardware through two completely separate
interfaces, crypto_rng and hwrng. However, the implementation of this
is buggy because it permits generation operations from these interfaces
to run concurrently with each other, accessing the same registers. That
is, qcom_rng_generate() synchronizes with itself but not with
qcom_hwrng_read(). This results in potential repetition of output from
the RNG, output of non-random values, etc.
Fortunately, there's actually no point in hardware RNG drivers
implementing the crypto_rng interface. It's not actually used by
anything besides the "rng" algorithm type of AF_ALG, which in turn is
not actually used in practice. Other crypto_rng hardware drivers are
likewise being phased out, leaving just the hwrng support.
Thus, remove it to simplify the code and avoid conflict (and confusion)
with the hwrng interface which is the one that actually matters. |
