| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending') |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Build the cid tables privately and publish them with RCU
The cid tables are visible to the cid kfuncs while being modified: the
first enable publishes the global pointers before filling them,
ops.init_cids() overrides rewrite them in place, and re-enables rebuild
them in place. A racing TRACING or SYSCALL program can read unfilled
entries, including uninitialized memory in the kmalloc'd tables, or torn
topo updates.
Tie the tables' lifetimes to the root sched instead: each root enable
builds a fresh set privately and publishes the per-table __rcu globals once
the layout is final, and root disable unpublishes and RCU-frees the set. A
non-NULL global is now always a fully built table which stays valid for the
reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as
no-mapping, also after the scheduler exits instead of reporting the stale
last mapping.
The cid kfuncs are available whether the root scheduler is cid-form or
cpu-form, the latter to allow gradual migration to cids. Every root
therefore builds and publishes a default mapping.
Every reader must either be gated on scheduler liveness or NULL-check
inside an RCU read section. Fix the two kfuncs that were neither:
scx_bpf_this_cid() read the table with no RCU or preemption protection and
scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program
in an RCU read section. The hotplug callbacks are instead serialized by
retiring the tables inside the cpus_read_lock() section that clears
scx_root.
v2: Document why every root builds the tables (desc + cid.c comment). |
| In Splunk SOAR versions below 8.7.0, a user that holds a role with the Users and Roles view permission could use the Representational State Transfer (REST) API to infer authentication token values for other users. If the inferred token grants administrative access, that user could gain administrative access to the Splunk SOAR instance.
The vulnerability is possible because the REST API accepts caller-controlled query filters on sensitive user record fields.
For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Query for Data (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/query-for-data), and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. |
| A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. |
| A flaw was found in evolution-data-server. Calendar events containing a file:// URI in their ATTACH property automatically read the targeted local file, base64-encode its contents and upload it back to the server when the event is saved. There are no file path restrictions or checks to verify whether the attachment originally came from the server or was added locally. This allows an attacker with access to a shared CalDAV calendar to exfiltrate arbitrary files the user has access to when interacting with malicious calendar events. |
| When the http:// stream wrapper follows a redirect it forwards the user-supplied Authorization, Cookie and Proxy-Authorization headers unchanged, even when the redirect target is a different host, a different port, or a downgrade from HTTPS to HTTP. A server that can steer a redirect therefore receives credentials that were only meant for the original origin. This is the same class of issue that libcurl fixed in 7.58.0 ( CVE-2018-1000007 https://github.com/advisories/GHSA-g7x2-hrfp-pv5f ). |
| PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59. |
| PraisonAI is a multi-agent teams system. From version 4.2.1 to before version 4.6.59, PraisonAI's AgentOS FastAPI deployment surface remains unauthenticated in current main and in releases after the published patched version for GHSA-pm96-6xpr-978x / CVE-2026-40151. The chat route directly calls agent.chat(request.message). No-auth and wrong-bearer requests both execute the deployed agent. This is broader than passive metadata disclosure. In any deployment where AgentOS wraps agents with tools, private context, memory, API integrations, or cost-bearing model calls, an unauthenticated reachable client can drive those agents. This issue has been patched in version 4.6.59. |
| PraisonAI is a multi-agent teams system. From version 4.5.115 to before version 4.6.61, the published A2U advisory GHSA-f292-66h9-fpmf says unauthenticated A2U event streaming was fixed in praisonai 4.5.115. Current head still exposes the same A2U subscription and event routes without authentication when the operator starts the documented CLI entrypoint. The current CLI wrapper does not expose --api-key, does not install the common API-key middleware, and does not generate a token for A2U. It calls create_a2u_routes(app) directly. That helper only enforces auth if A2U_AUTH_TOKEN is already present; if the variable is missing, _authenticate_request() returns None and treats auth as disabled. This issue has been patched in version 4.6.61. |
| The GTM Server Side plugin by stape.io implements server-side tracking on WordPress websites. From version 2.0.0 to before version 2.1.48, the WooCommerce purchase event tracking mechanism allows an unauthenticated attacker to trigger the rendering of another customer's full order data — including personally identifiable information (PII) — into the page's JavaScript dataLayer. This issue has been patched in version 2.1.48. |
| The Otter Blocks WordPress plugin before 3.2.8 does not correctly determine whether a post is publicly readable before returning its data through a REST API endpoint, treating any post with the published status as public, allowing unauthenticated users to read manual excerpts of password-protected posts, the content and titles of non-public post types, and, on WooCommerce sites, coupon codes and their descriptions. |
| The WP Mail Logging plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.17.0 via the 'email_address' parameter. This makes it possible for authenticated attackers, with administrator-level access and above, to extract complete logged mail rows belonging to other users — including recipient addresses, message subjects, full message bodies, and any URLs contained therein — whose addresses happen to match the wildcard. Exploitation requires an administrator to process a personal-data export request for the attacker's email address via the standard WordPress privacy workflow, and the attacker's address must contain a LIKE wildcard character (such as an underscore) that matches at least one other user's address in the mail log. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, the MMS file service in src/mms/iso_mms/server/mms_file_service.c accepts an out-of-range initialPosition in fileOpen and stores it in the file-read state. The fileRead path then subtracts the larger read position from the file size using unsigned arithmetic and fails to limit the response to the actual FileSystem_readFile return value. The oversized response can include stale bytes from the reused connection buffer after the requested file contents, disclosing prior response data and protocol fragments to an unauthenticated remote client when the file service is enabled. This issue is fixed in version 1.6.2. |
| The Salon Booking System WordPress plugin before 10.31.3 does not restrict several of its booking REST API routes to users with the appropriate capability, allowing any authenticated user such as a subscriber to read every customer's booking records, including their personal data. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK product of Oracle Java SE (component: Networking). Supported versions that are affected are Oracle Java SE: 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Siebel Apps - Marketing accessible data. CVSS 3.1 Base Score 2.2 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:L/I:N/A:N). |
| Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 2.5.0, UpdateRegistry and TestRegistry in backend/api/services/container_registry_service.go allow the registry URL to change while preserving the stored encrypted token. When a holder of registries:update and registries:test repoints a generic registry URL without supplying a replacement token, TestRegistry decrypts the preserved token and RegistryLogin sends it to the attacker-controlled host because normalizeRegistryServerAddressInternal does not restrict the destination. This exposes the stored container-registry PAT or password and can enable image access or tampering. This issue is fixed in version 2.5.0. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.34.0, a public REST API type that uses publicApiProjection can expose excluded searchable or sortable field information through search membership and sort ordering oracles. Returned fields remain filtered by the projection, so the issue permits targeted inference about hidden values rather than an unrestricted field dump. This issue is fixed in version 4.34.0. |
| follow-redirects is a Node.js HTTP and HTTPS client wrapper that automatically follows redirects. From version 1.16.0 to before version 1.16.1, follow-redirects removes sensitive credential headers (Authorization, Proxy-Authorization, Cookie, and any caller-declared sensitiveHeaders) before following a redirect that crosses to a different host or downgrades to a less secure protocol. The removal routine iterates the caller's headers container with for...in and matches header names against a filter. This assumes the headers container is a plain object keyed by header names. Node's underlying http.request, which follow-redirects is a drop-in replacement for, also accepts headers as an alternating array of names and values. For an array, for...in yields the numeric indices "0", "1", "2" and so on, which never match a header-name filter, so nothing is removed. An application that sends array-form headers and follows an attacker-controlled cross-origin redirect therefore forwards its Authorization, Cookie, and Proxy-Authorization headers verbatim to the attacker-controlled destination, with no error or warning. The sensitiveHeaders option added to fix CVE-2026-40895 / GHSA-r4q5-vmmm-2653 is equally ineffective, because it relies on the same helper. This is an unauthenticated confidentiality vulnerability: any remote server the victim application contacts can harvest the victim's credential headers by responding with a cross-origin redirect. This issue has been patched in version 1.16.1. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.7.4 via the 'params (customer[uuid])' parameter. This makes it possible for unauthenticated attackers to extract the first name, last name, email address, phone number, and notes of every customer record in the database by enumerating uuid prefixes via the unauthenticated steps__load_step AJAX endpoint. This vulnerability is only exploitable when the LatePoint plugin is configured with the 'Field used for authentication' setting set to 'Disable ability to login' (guest checkout mode). |
