Export limit exceeded: 390711 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390711 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89637 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. | ||||
| CVE-2026-89636 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89631 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it. | ||||
| CVE-2026-89630 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") changed the quantity this bound is measured against. It used to be srv->total_read minus the 4-byte RFC1002 preamble that total_read then included, so it was the SMB message length. The same commit stopped counting the preamble, and the mechanical substitution to srv->total_read - srv->pdu_size left an expression that is identically zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly pdu_length - MID_HEADER_SIZE() more, adding both to total_read. len is therefore 0, the subtraction below it wraps, and no __u32 DataOffset can exceed the result, so the check from commit 097f5863b1a0 ("cifs: read overflow in is_valid_oplock_break()") no longer rejects anything. Use total_read, which is now the message length on its own. | ||||
| CVE-2026-89629 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Check size of status and firmware events before reading them Malformed status and firmware events could cause an out-of-bounds read since the size wasn't being checked. Check the size and warn on unexpected values to avoid this. | ||||
| CVE-2026-89628 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: clamp eeprom debugfs read to bytes actually received picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte supplied by the device in its REPORT_EE_DATA reply -- clamped only to the caller's read() count: ret = resp->raw_data[2]; if (ret > s) ret = s; if (copy_to_user(u, resp->raw_data+3, ret)) It never checks resp->raw_size, the number of bytes picolcd_raw_event() actually copied into the 64-byte raw_data[] of the kmalloc'd struct picolcd_pending. A device (or a spoofed picoLCD) returning a length byte of 0xff, read with a count >= 255, makes copy_to_user() read past raw_data[] into adjacent slab memory and return it to userspace through the debugfs "eeprom" file: BUG: KASAN: slab-out-of-bounds in _copy_to_user Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd] The debug-dump path in the same file already validates the device length byte against the received size before trusting it; this read does not. The file is created S_IRUSR (root-only) and a crafted device is needed, so it is neither unprivileged- nor remotely-triggerable. Clamp the copy length to resp->raw_size - 3 (the payload actually received, minus the 3-byte header), floored at 0 for short replies. | ||||
| CVE-2026-89627 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: free buffered reports when destroying device roccat_report_event() duplicates each report with kmemdup() and stores the allocation in a circular-buffer slot. The allocation is released only when that slot is reused. The device destruction paths free struct roccat_device without releasing reports still stored in cbuf[]. This makes those allocations unreachable and leaks up to ROCCAT_CBUF_SIZE report buffers per device. Add a small destructor that frees every buffered report before freeing the device, and use it in both paths that can destroy a registered device. | ||||
| CVE-2026-89626 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attributes() creates one sysfs group for each custom sensor field. If sysfs_create_group() fails after some groups have already been created, the function returns the error without removing the previously created groups. Add a local unwind path to remove the groups that were already created. With enable_sensor exposed only after the field attributes are ready, this path can free sensor_inst->fields without leaving enable_sensor able to access pointers into that array. | ||||
| CVE-2026-89625 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer: ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB completion ghl_magic_poke_cb() re-arms the timer with mod_timer(). sony_remove() drained the timer with timer_delete_sync() and then freed the URB with usb_free_urb(): timer_delete_sync(&sc->ghl_poke_timer); usb_free_urb(sc->ghl_urb); timer_delete_sync() does not block re-arming, and while the URB is in flight the timer is not pending, so the sync delete is a no-op. A URB completion that runs after the delete re-arms the timer, and usb_free_urb() only drops a reference -- it does not kill an in-flight URB. sc is allocated with devm_kzalloc() and freed once sony_remove() returns, so the re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a use-after-free from timer softirq. This is a disconnect/rmmod race. Poison the URB first, then shut the timer down, before freeing the URB. usb_poison_urb() kills any in-flight URB and permanently rejects further submissions, so a poke timer that is still pending cannot re-submit the URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs. usb_kill_urb() would not suffice: it only cancels the in-flight URB and leaves it submittable once it returns, so the pending timer could re-submit it and put a fresh URB in flight over the freed sc. timer_shutdown_sync() then drains any last callback and blocks re-arming. The probe error path is unaffected: it is only reached before the timer is armed. Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds and arms the poke timer, the poke URB is held in flight, the driver is unbound (freeing sc), then the URB is released. The completion re-arms the timer on the freed sc, and the re-armed timer fires ~8 s later: BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0 Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0 ghl_magic_poke+0x98/0xb0 call_timer_fn+0x35/0x2b0 __run_timers+0x69c/0x9a0 run_timer_softirq+0x173/0x2a0 Allocated by task 169: sony_probe Freed by task 338: devres_release_group <- hid_device_remove (sony_remove) Found by 0sec (https://0sec.ai) using automated source analysis. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89623 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 3.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: stop device IO before hid_hw_stop Quiesce device IO at the start of the devm cleanup callback mcp2221_hid_unregister() so that incoming HID reports cannot race with hardware teardown during probe failure or device removal, addressing a potential use-after-free. Guard the call to hid_device_io_stop() with io_started. On normal removal hid_device_remove() has already cleared io_started before the devres group is released, so an unconditional call would otherwise hit the !io_started path and emit a spurious "io already stopped" warning on every removal. The guard preserves the probe-failure balancing, where io_started is still set after hid_device_io_start(), while staying silent on the normal removal path. | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89621 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: validate report size in mcp2221_raw_event() mcp2221_raw_event() never validates the size of incoming HID reports. In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3] as the copy length without checking that 4 + data[3] bytes actually exist in the received report. A malicious or misbehaving USB device can send a short report with a large data[3], causing the memcpy to read past the valid report data in the HID transfer buffer and leak uninitialized kernel memory back to userspace through the I2C/SMBus read path. Add a minimum size check at entry and validate that the source range fits within the received report before the copy. | ||||
| CVE-2026-89620 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: validate report size before copy write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap buffer allocated in quickspi_alloc_report_buf() to the device-descriptor derived max_report_len (a few hundred bytes for a touch controller). It copies the caller-supplied report into that buffer: memcpy(write_buf->content, report_buf, report_buf_len); The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a report larger than max_report_len therefore overflows report_buf with attacker-controlled length and content. Record the report_buf allocation size and reject reports that do not fit before copying, matching the equivalent guard in the intel-quicki2c sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix. write_cmd_to_txdma() writes the output report header ahead of the content in the same buffer, so size the allocation to cover the header as well. That keeps the added bound from rejecting a maximum-sized report. | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89618 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ] | ||||
| CVE-2026-89617 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate dirty page table on log replay Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk lcns_follow field. check_rstbl() validates the table bookkeeping but never checks that this array fits in the entry, so a crafted lcns_follow lets the v0->v1 conversion memmove and later replay passes run off the entry. Add check_dp_table() to reject, right after check_rstbl(), any entry larger than its size claims via struct_size() (the same expression used to allocate these entries, so the check is overflow-safe by construction). All consumers can then trust lcns_follow as the real capacity. This covers every page_lcns[] access whose index is bounded by the entry itself (the conversion memmove, the HotFix store via find_dp(), and the self-bounded scan loops). Accesses whose index comes from the log record need a separate bound and are handled in a follow-up patch. | ||||