| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
Publish new hooks in the list into the basechain/flowtable using
splice_list_rcu() to ensure netlink dump list traversal via rcu is safe
while concurrent ruleset update is going on. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: fix ep_remove struct eventpoll / struct file UAF
ep_remove() (via ep_remove_file()) cleared file->f_ep under
file->f_lock but then kept using @file inside the critical section
(is_file_epoll(), hlist_del_rcu() through the head, spin_unlock).
A concurrent __fput() taking the eventpoll_release() fastpath in
that window observed the transient NULL, skipped
eventpoll_release_file() and ran to f_op->release / file_free().
For the epoll-watches-epoll case, f_op->release is
ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which
kfree()s the watched struct eventpoll. Its embedded ->refs
hlist_head is exactly where epi->fllink.pprev points, so the
subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed
kmalloc-192 memory.
In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot
backing @file could be recycled by alloc_empty_file() --
reinitializing f_lock and f_ep -- while ep_remove() is still
nominally inside that lock. The upshot is an attacker-controllable
kmem_cache_free() against the wrong slab cache.
Pin @file via epi_fget() at the top of ep_remove() and gate the
critical section on the pin succeeding. With the pin held @file
cannot reach refcount zero, which holds __fput() off and
transitively keeps the watched struct eventpoll alive across the
hlist_del_rcu() and the f_lock use, closing both UAFs.
If the pin fails @file has already reached refcount zero and its
__fput() is in flight. Because we bailed before clearing f_ep,
that path takes the eventpoll_release() slow path into
eventpoll_release_file() and blocks on ep->mtx until the waiter
side's ep_clear_and_put() drops it. The bailed epi's share of
ep->refcount stays intact, so the trailing ep_refcount_dec_and_test()
in ep_clear_and_put() cannot free the eventpoll out from under
eventpoll_release_file(); the orphaned epi is then cleaned up
there.
A successful pin also proves we are not racing
eventpoll_release_file() on this epi, so drop the now-redundant
re-check of epi->dying under f_lock. The cheap lockless
READ_ONCE(epi->dying) fast-path bailout stays. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected GFN
The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus
the SPTE index. This assumption breaks for shadow paging if the guest
page tables are modified between VM entries (similar to commit
aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even
when creating an MMIO SPTE", 2026-03-27). The flow is as follows:
- a PDE is installed for a 2MB mapping, and a page in that area is
accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages;
the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because
the guest's mapping is a huge page (and thus contiguous).
- the PDE mapping is changed from outside the guest.
- the guest accesses another page in the same 2MB area. KVM installs
a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN
(i.e. based on the new mapping, as changed in the previous step) but
that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore
the rmap entry cannot be found and removed when the kvm_mmu_page
is zapped.
- the memslot that covers the first 2MB mapping is deleted, and the
kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove()
only looks at the [sp->gfn, sp->gfn + 511] range established in step 1,
and fails to find the rmap entry that was recorded by step 3.
- any operation that causes an rmap walk for the same page accessed
by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page.
This includes dirty logging or MMU notifier invalidations (e.g., from
MADV_DONTNEED).
The underlying issue is that KVM's walking of shadow PTEs assumes that
if a SPTE is present when KVM wants to install a non-leaf SPTE, then the
existing kvm_mmu_page must be for the correct gfn. Because the only way
for the gfn to be wrong is if KVM messed up and failed to zap a SPTE...
which shouldn't happen, but *actually* only happens in response to a
guest write.
That bug dates back literally forever, as even the first version of KVM
assumes that the GFN matches and walks into the "wrong" shadow page.
However, that was only an imprecision until 2032a93d66fa ("KVM: MMU:
Don't allocate gfns page for direct mmu pages") came along.
Fix it by checking for a target gfn mismatch and zapping the existing
SPTE. That way the old SP and rmap entries are gone, KVM installs
the rmap in the right location, and everyone is happy. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix handling of disconnected directories
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked()
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: start using dst_dev_rcu()
Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF.
Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(),
ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
But it's wrong for the much subtler "next to last" case when somebody
*else* may also be dropping their reference and free the ep while we're
still using the mutex.
Note that this is true even if that other user is also using the same ep
mutex: mutexes, unlike spinlocks, can not be used for object ownership,
even if they guarantee mutual exclusion.
A mutex "unlock" operation is not atomic, and as one user is still
accessing the mutex as part of unlocking it, another user can come in
and get the now released mutex and free the data structure while the
first user is still cleaning up.
See our mutex documentation in Documentation/locking/mutex-design.rst,
in particular the section [1] about semantics:
"mutex_unlock() may access the mutex structure even after it has
internally released the lock already - so it's not safe for
another context to acquire the mutex and assume that the
mutex_unlock() context is not using the structure anymore"
So if we drop our ep ref before the mutex unlock, but we weren't the
last one, we may then unlock the mutex, another user comes in, drops
_their_ reference and releases the 'ep' as it now has no users - all
while the mutex_unlock() is still accessing it.
Fix this by simply moving the ep refcount dropping to outside the mutex:
the refcount itself is atomic, and doesn't need mutex protection (that's
the whole _point_ of refcounts: unlike mutexes, they are inherently
about object lifetimes). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: extend RCU protection in igmp6_send()
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hyperv: streamline driver probe to avoid devres issues
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
In mtk_crtc_create(), if the call to mbox_request_channel() fails then we
set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation,
we do not call cmdq_pkt_create().
During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan"
is NULL first before calling cmdq_pkt_destroy(). Calling
cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and
it will result in a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointers before using them
[WHAT & HOW]
These pointers are null checked previously in the same function,
indicating they might be null as reported by Coverity. As a result,
they need to be checked when used again.
This fixes 3 FORWARD_NULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail verification for sign-extension of packet data/data_end/data_meta
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
[1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate function returns
[WHAT & HOW]
Function return values must be checked before data can be used
in subsequent functions.
This fixes 4 CHECKED_RETURN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Ensure array index tg_inst won't be -1
[WHY & HOW]
tg_inst will be a negative if timing_generator_count equals 0, which
should be checked before used.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
Move the freeing of the dummy net_device from mtk_free_dev() to
mtk_remove().
Previously, if alloc_netdev_dummy() failed in mtk_probe(),
eth->dummy_dev would be NULL. The error path would then call
mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev
was allocated (but it was not), potentially causing a NULL pointer
dereference.
By moving free_netdev() to mtk_remove(), we ensure it's only called when
mtk_probe() has succeeded and dummy_dev is fully allocated. This
addresses a potential NULL pointer dereference detected by Smatch[1]. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mem: Fix no cxl_nvd during pmem region auto-assembling
When CXL subsystem is auto-assembling a pmem region during cxl
endpoint port probing, always hit below calltrace.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x160
? do_user_addr_fault+0x65/0x6b0
? exc_page_fault+0x7d/0x170
? asm_exc_page_fault+0x26/0x30
? cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem]
? cxl_pmem_region_probe+0x1ac/0x360 [cxl_pmem]
cxl_bus_probe+0x1b/0x60 [cxl_core]
really_probe+0x173/0x410
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x90/0x120
bus_for_each_drv+0x84/0xe0
__device_attach+0xbc/0x1f0
bus_probe_device+0x90/0xa0
device_add+0x51c/0x710
devm_cxl_add_pmem_region+0x1b5/0x380 [cxl_core]
cxl_bus_probe+0x1b/0x60 [cxl_core]
The cxl_nvd of the memdev needs to be available during the pmem region
probe. Currently the cxl_nvd is registered after the endpoint port probe.
The endpoint probe, in the case of autoassembly of regions, can cause a
pmem region probe requiring the not yet available cxl_nvd. Adjust the
sequence so this dependency is met.
This requires adding a port parameter to cxl_find_nvdimm_bridge() that
can be used to query the ancestor root port. The endpoint port is not
yet available, but will share a common ancestor with its parent, so
start the query from there instead. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: use reserved tag for reg read/write command
In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:
1. For the disable ctrl path, we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
are called serially.
So the reserved tags may still be enough while reg_xx() use reserved tags. |
