| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: bail out of setup if the controller is inaccessible
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix race between interrupt and resend
After commit f8fce75fedf7 ("fuse: clear intr_entry in fuse_resend and
fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in
fuse_request_free() still triggers due to the following race:
In request_wait_answer()
if (test_bit(FR_SENT, &req->flags)) -> returns true
In fuse_chan_resend()
clear_bit(FR_SENT, &req->flags)
In request_wait_answer()
queue_interrupt(req)
Fix by:
- move clearing FR_SENT inside fpq->lock
- move setting FR_PENDING inside fiq->lock
- recheck FR_SENT after acquiring fiq->lock in fuse_dev_queue_interrupt() |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix missing barrier when checking io-uring readiness
fuse_block_alloc() reads fch->initialized and then fch->io_uring.
fch->io_uring is set before fch->initialized, ordered by the smp_wmb()
in fuse_chan_set_intialized(), but fuse_block_alloc() has no matching
read barrier between the two loads.
This may lead a CPU to observe fch->initialized=1 but fch->io_uring=0,
and skip the check that blocks request allocation until the io-uring
queues are ready. This can reintroduce the lock-order inversion deadlock
that commit 3393ff964e0f prevents.
Add an smp_rmb() barrier to pair with the smp_wmb() in
fuse_chan_set_initialized() to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: publish io-uring queues with release semantics
fuse_uring_create_queue() initializes a fuse_ring_queue and then
publishes the pointer into ring->queues[qid] with WRITE_ONCE() under the
fch->lock. There are several readers that may concurrently be fetching
that pointer locklessly and then deferencing it.
WRITE_ONCE() doesn't ensure ordering of the queue's field
initialization before the ring->queues[qid] pointer assignment. The
queue must be published with smp_store_release() so the field
initialization is guaranteed to happen before.
Readers in paths where the read may happen concurrently with the store
need to use READ_ONCE() because any race involving a plain access is
undefined. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clamp route advmss to TCP_MIN_MSS
tcp_select_initial_window() assumes that callers never pass an MSS
smaller than 1, but route-derived advmss values can violate that
assumption.
A too-small explicit RTAX_ADVMSS is one way to get there, but it is not
the only one. The same divide-by-zero can also be reached through the
"default advmss" path when RTAX_ADVMSS is left at 0 and the effective
advmss is later driven down by route MTU and min_adv_mss.
Introduce a tcp_dst_advmss() helper that clamps route advmss to
TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that
derive advmss from dst metrics. This keeps the effective MSS from
dropping to zero before tcp_select_initial_window() rounds the receive
window. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: defer vmalloc TX_RING free until skbs finish
AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb
page references preserve page-backed ring blocks after pg_vec is freed,
but they do not preserve a vmalloc mapping.
tpacket_destruct_skb() currently drops the pending reference before
writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the
decrement after those stores. The smp_wmb() in __packet_set_status()
orders the frame stores before the decrement.
Also recheck pending TX frames under pg_vec_lock before non-closing
ring replacement, so a racing send cannot add a pending skb between
the initial check and the ring swap.
Ring allocation can produce a mixture of page-backed and vmalloc-backed
blocks. Allocate deferred-work storage during TX ring setup when the
first vmalloc-backed block is encountered, and keep its pointer in the
pg_vec allocation header. If allocation fails, return -ENOMEM from ring
setup. On socket close, a non-NULL pointer identifies a vmalloc-backed
vector without a scan. If TX skbs remain, defer the whole vector to
system_long_wq.
After pg_vec is detached, a late destructor can skip the pending
decrement. Use socket write-memory accounting as the deferred lifetime
gate instead: an skb remains charged through its final sock_wfree(),
after all ring-frame accesses. The delayed work retains a socket
reference and reschedules itself until no TX skbs remain.
Move pending_refcnt release to packet_sock_destruct() so late skb
destructors and deferred cleanup can safely use it after
packet_release(). Page-backed teardown remains synchronous, and no lock
is added to the TX completion hot path. |
| knowns through 0.33.0 exempts the project.set action from permission guard checks unconditionally, allowing read-only agent sessions to bypass restrictions. Attackers can invoke project.set to repoint the server at another project directory and obtain write access capabilities. |
| knowns through 0.33.0 fails to validate the path query parameter in the workspace browse endpoint, allowing remote attackers to enumerate arbitrary directories on the host filesystem. Attackers can traverse the directory structure to locate project directories and identify targets for further exploitation. |
| Traefik is an open source HTTP reverse proxy and load balancer. From 2.8.2 until 2.11.56 and 3.7.12, HTTP/3 entrypoints do not apply entryPoints..transport.respondingTimeouts.readTimeout because the timeout is enforced on a TCP connection and the HTTP/3 server has no corresponding QUIC stream deadline. An unauthenticated client can use a slow request body, trickling data indefinitely while holding a request and an upstream connection open and exhausting backends with bounded connection pools. This issue is fixed in 2.11.56 and 3.7.12. |
| rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.49.0 until 1.75.1, the HTTP backend attaches headers configured through --http-headers or headers= to requests in backend/http/http.go, while its fshttp.NewClient client follows redirects without a backend-specific http.Client.CheckRedirect policy. A configured remote that redirects to another host can therefore cause custom secrets such as X-Api-Key to be resent to that untrusted destination, and a same-host HTTPS-to-HTTP redirect can expose Authorization or Cookie headers in cleartext. Listing, stat, download, mount, and serve operations can trigger the leak during normal use. This issue is fixed in version 1.75.1. |
| Consul and Consul Enterprise are vulnerable to an authorization bypass in the catalog node-write path that may allow an authenticated attacker to delete another node's catalog registration and take over its node identity. An attacker with a token granting node-write permission on any single node name may exploit this issue if they can obtain the node ID of a node they do not control. This vulnerability (CVE-2026-87090) is fixed in Consul 2.0.4 and Consul Enterprise 1.21.18, 1.22.12 and 2.0.4. |
| Consul and Consul Enterprise are vulnerable to a denial of service in the native RPC listener that may allow an authenticated client to exhaust server memory before ACL authorization is evaluated. A client that can complete the internal RPC mTLS handshake may exploit this issue without holding a valid ACL token. This vulnerability (CVE-2026-87106) is fixed in Consul 2.0.4 and Consul Enterprise 1.21.18, 1.22.12 and 2.0.4. |
| Uncontrolled recursion (CWE-674) in the QDomDocument/QDomNode serialization path of the Qt XML module (QtXml, qtbase). QDomElementPrivate::save() and QDomNodePrivate::save() recurse mutually, consuming one stack frame per level of element nesting with no depth limit, no configurable bound and no error return. A document with deeply nested elements parses successfully but exhausts the call stack and terminates the process when serialized. Reachable via QDomDocument::toByteArray() (Qt 4.0 and later), QDomDocument::toString(), QDomDocument::toCString(), QDomNode::save(), and operator<<(QTextStream&, const QDomNode&). Denial of service only — no code execution and no memory disclosure. |
| import_contacts Path Traversal in Groundhogg <= 4.7.1 versions. |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. |
| Unauthenticated Broken Authentication in WP Travel <= 12.0.3 versions. |
| knowns versions before 0.31.0 fail to properly validate the x-opencode-directory request header in the /api/opencode proxy endpoint. Remote attackers can supply arbitrary directory paths to execute file operations outside the project root on the host system. |
| Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.56, and from 3.0.0 until 3.7.12, a client-supplied dot-form header such as X.Authenticated.User survives ForwardAuth replacement and underscoreHeadersStrategy because Go treats it as distinct from X-Authenticated-User while normalization-prone CGI, WSGI, PHP, and NGINX backends collapse both names. A backend can consequently consume the client value instead of the identity Traefik asserted, allowing identity spoofing for any header managed by Traefik. The aliasHeadersStrategy protection is disabled by default and must be configured as delete or reject. The mitigation is available in 2.11.56 and 3.7.12. |
| Improper neutralization of special elements in data query logic in the GridFS component of the MongoDB C# Driver can cause a caller-supplied structured file identifier to be interpreted as a query condition rather than as a literal identifier. An authenticated user who can influence the identifier passed by an affected application may obtain stored file content beyond the intended target or cause all GridFS file chunks in the affected bucket to be removed, rendering stored file content unreadable. The affected rename operation may also rename a stored file other than the intended target. |
| Consul and Consul Enterprise are vulnerable to an authorization bypass in the Connect service mesh that may allow a service to reach a destination it is not authorized to access. When building Envoy RBAC rules to enforce Connect intentions, Consul did not correctly escape certain characters in service names, namespaces, and partitions, causing the generated authorization rules to match more broadly than intended. This vulnerability (CVE-2026-88021) is fixed in Consul 2.0.4 and Consul Enterprise 1.21.18, 1.22.12 and 2.0.4. |
