| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| stomper 5e2741e is vulnerable to Denial of Service. A malicious client can send partial STOMP frames and keep the TCP connections open, which, combined with the broker s use of edge-triggered epoll (EPOLLET) and MSG_PEEK in recv(), causes sockets to enter a permanent half-read state. When enough such connections accumulate, the broker stops receiving any further epoll events for those sockets and eventually hangs in epoll_wait, effectively refusing to process new messages. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the
driver's vdevice_size against the core structure size with a WARN_ON_ONCE.
On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it
skips the mutex_unlock(), leaving the igroup lock held and deadlocking the
next vDEVICE operation on that group.
Jump to out_unlock_igroup instead. |
| When a container-level ErrorHandler is configured (the mitigation for finding 221000), each delivery whose processing throws still permanently consumes one link credit. After initialCredits (default 100) failing messages the receiver's credit reaches zero and the broker stops delivering, leaving the listener silently stalled while isRunning() remains true.
Spring AMQP 4.1.0 |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: reclaim forward-allocated memory on RX path errors
After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"),
errors in the receive path prior to queueing skbs into the receive
queue do not trigger forward-allocated memory reclaiming.
Prevent forward memory from growing unboundedly in pathological drop
scenarios by explicitly reclaiming memory when skbs are dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/igen6: Fix call trace due to missing release()
When unloading the igen6_edac driver, there is a call trace:
Device '(null)' does not have a release() function, it is broken and must be fixed.
See Documentation/core-api/kobject.rst.
WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209
...
RIP: 0010:device_release+0x84/0x90
Call Trace:
<TASK>
kobject_put+0x8c/0x220
put_device+0x17/0x30
igen6_unregister_mcis+0xa2/0xe0 [igen6_edac]
igen6_remove+0x82/0xb0 [igen6_edac]
...
Fix the call trace by providing empty release() functions for the
memory controller devices. |
| It is possible for outbound HTTP requests using a Micrometer-instrumented client to cause a denial-of-service (DoS) condition due to an unbounded memory leak.
Micrometer 1.17.0
Micrometer 1.16.0 - 1.16.6
Micrometer 1.15.0 - 1.15.12
Micrometer 1.14.0 - 1.14.16
Micrometer 1.9.18 and earlier |
| In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed.
This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response.
In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix ilock leak on error in xfs_dq_get_next_id
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly. |
| Missing Release of Resource after Effective Lifetime vulnerability in Apache CloudStack's scoped global configuration functionality. It affects different modules and plugins of the CloudStack management server, including Quota, Host-HA, etc., and may lead to eventual denial of service (DoS) scenario for the management server.
This issue affects Apache CloudStack: from 4.7.0 through 4.20.3.0 and from 4.21.0.0 through 4.22.1.0.
Users are recommended to upgrade to version 4.20.3.1 or 4.22.1.1 or later, which fixes the issue. |