| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix sync entry leak on OA config emit failure
xe_oa_emit_oa_config() releases the sync entries and the syncs array
only on its success path. When it fails before the point of no return
(fence allocation, config buffer allocation or batch submission), it
returns without touching stream->syncs.
The stream open path handles such failures in the caller, but
xe_oa_config_locked() propagates the error without any cleanup, so the
syncs array and the fence references held by the parsed entries are
leaked. The next config ioctl overwrites stream->syncs, making the
memory unreachable for good.
Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching
the cleanup done by the stream open error path.
(cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: purge fragmented skbs during cleanup
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: fix iovec leak when the async cmd is not recycled
An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the
vec has to grow and kept across recycling through ctx->cmd_cache. On two
paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops
the io_async_cmd without it.
io_req_uring_cleanup() clears the async data flags only when
io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX ==
128 entries, so once it is full the put fails and the vec is left behind.
An NVMe passthrough workload gets there without doing anything unusual:
nvme_uring_cmd_io() returns -EIOCBQUEUED, so the io_async_cmd stays
attached for the lifetime of the command and the live object count tracks
the queue depth. Above 128 the puts start failing.
->cleanup is the last chance to free an inherited vec, since
io_req_uring_cleanup() returns early for an io-wq issued command and is
not called at all for one completed without ever being issued. But
io_clean_op() calls ->cleanup only if REQ_F_NEED_CLEANUP is set, and for
uring_cmd that happens only where the vec has to grow, so a command
reusing a large enough cached vec never sets it. io_rw_alloc_async() and
io_msg_alloc_async() flag an inherited vec for exactly this reason;
io_uring_cmd_prep() does not.
Flag an inherited vec in io_uring_cmd_prep(), and free the vec when the
cache put fails, as io_req_rw_cleanup() does.
The leak is invisible under KASAN, where io_alloc_cache_vec_kasan() frees
the vec unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: put CQ ref on create_cq mapping failure
nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a
reference on the controller and installs the completion queue. If the
subsequent PCI address-space mapping fails or returns a too-small partial
mapping, the function jumps to err_internal / err_unmap_queue without
calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is
gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping
succeeds, so teardown never releases these references. A remote PCI host
that drives Create IO CQ commands with a failing PRP1/pci_addr therefore
leaks the CQ and a controller reference on each attempt.
Drop the CQ reference on the mapping-failure paths. The err_internal and
err_unmap_queue labels are only reachable after nvmet_cq_create() has
succeeded, so this pairs the create/put correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix DMA fence leak
In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the
underlying dma_fence later initialized by dma_fence_init(), which sets
its kref counter to 1. Then, dma_resv_add_fence() gets a second
reference, and a pointer to the ffs_dma_fence is passed as the
usb_request's "context" field.
The dma-resv mechanism will manage the second reference, but the first
reference is never properly released; the ffs_dmabuf_cleanup() function
decreases the reference count, but only to balance with the reference
grab in ffs_dmabuf_signal_done().
The code will then slowly leak memory as more ffs_dma_fence objects are
created without being ever freed.
Address this issue by transferring ownership of the fence to the DMA
reservation object, by calling dma_fence_put() right after
dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded
after being signalled. |
| An issue in Vim Project v9.2.0389 and earlier allows a local attacker to execute arbitrary code via the vms_fixfilename() function within file vim/src/os_vms.c |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted. |
| Missing release of memory after effective lifetime vulnerability in Softing smartLink allows resource leak exposure.
This issue affects smartLink HW-PN: from 1.04 before 1.10. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: keyspan_pda: fix information leak
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended. |
| A vulnerability in Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 that are running Cisco Session Initiation Protocol (SIP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper memory management when an affected device processes HTTP packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted HTTP packets to the device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, resulting in a DoS condition. A manual reboot of the device is required to recover from this condition.
Note: For this vulnerability to be exploitable, the phone must be registered to Cisco Unified Communications Manager (Unified CM) and have Web Access enabled. Web Access is disabled by default. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| By spoofing the target resolver with responses that have a malformed ECDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources. |
| By spoofing the target resolver with responses that have a malformed EdDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources. |
| Nokogiri versions before 1.19.3 contain a memory leak in the XSLT Stylesheet transform method when processing Ruby strings containing null bytes. Attackers can exploit this by passing attacker-controlled input with null bytes to transform parameters, causing heap allocations to leak and enabling denial of service against long-running processes. |
| net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation. When it is called with a data packet pending on an unresolved neighbor and that neighbor's pending_queue is already non-empty (an NS is already outstanding), the function appends the data packet and returns early without ever sending the NS via net_send_data() or releasing it with net_pkt_unref(). The freshly allocated NS net_pkt and its attached TX buffers are held only by a local variable and are leaked permanently, never returning to CONFIG_NET_PKT_TX_COUNT / CONFIG_NET_BUF_TX_COUNT.
The leaking branch sits on the normal IPv6 transmit path: net_ipv6_prepare_for_send() (called from net_if.c) invokes net_ipv6_send_ns() for any outbound or forwarded IPv6 packet whose next hop is not yet in the neighbor cache. An on-link (adjacent) attacker can drive it deterministically by sending a burst of request packets (for example ICMPv6 echo requests or UDP datagrams) that all spoof a single non-existent on-link source address: the node generates a reply to each, the first reply queues an NS, and every subsequent reply during the roughly three-second INCOMPLETE resolution window takes the leaking branch and loses one TX packet. Router-configured nodes forwarding attacker traffic toward a non-existent on-link host leak identically.
Because the leaked packets are never reclaimed and CONFIG_NET_PKT_TX_COUNT defaults to only 4 (14 for Ethernet), a brief low-rate burst exhausts the TX pool. Once exhausted the node can no longer allocate any transmit packet and cannot send TCP/UDP, ARP/ND, or any reply at all, producing a complete and persistent network denial of service that does not self-heal until reboot. The fix releases the unsent NS packet with net_pkt_unref(pkt) before the early return. |
| When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt.
The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released.
Any device on a bridged L2 segment can emit broadcast/multicast frames carrying an arbitrary EtherType with no authentication. Each such frame permanently consumes one buffer from the finite RX pool (CONFIG_NET_PKT_RX_COUNT), so a brief broadcast flood exhausts the pool and the device can no longer receive traffic until it is rebooted — a persistent denial of service. There is no confidentiality or integrity impact.
The fix makes eth_bridge_handle_locally() propagate the real net_verdict and return NET_CONTINUE for locally-kept frames, writing the bridge interface back through a new dst_iface out-parameter so the packet follows the normal receive path and is unreferenced exactly once. |
