| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them. |
| Relative Path Traversal vulnerability in Apache InLong. Arbitrary file read from the Agent host filesystem.
This issue affects Apache InLong: from 2.0.0 before 2.4.0.
Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1] to solve it.
[1] https://github.com/apache/inlong/pull/12146 . |
| LeafWiki is a self-hosted wiki. Versions 0.3.0 through 0.10.0 have a path traversal vulnerability in LeafWiki’s asset rename functionality. An authenticated user with editor permissions could move files that are accessible to the LeafWiki server process into a page’s asset directory. This could allow sensitive local files, such as the application database, to become downloadable as page assets. Users should update to version 0.10.1 or greater. As an additional mitigation, operators should ensure that the LeafWiki process runs with the least privileges necessary and does not have filesystem access to sensitive files outside the application’s required directories. Until a patch is applied, operators may reduce risk by restricting editor access to trusted users only and by limiting the filesystem permissions of the LeafWiki process. |
| Handlebars.java provides logic-less and semantic Mustache templates with Java. Prior to 4.5.3, com.github.jknack.handlebars.springmvc.SpringTemplateLoader resolves attacker-influenced Spring MVC view names through Spring ResourceLoader without the path-containment validation used by other URL-based loaders. In handlebars-springmvc/src/main/java/com/github/jknack/handlebars/springmvc/SpringTemplateLoader.java, a view name using a file: or classpath: URL and ending with the # fragment delimiter places the appended .hbs suffix in the fragment, which FileUrlResource.exists() and URL.openStream() discard. HandlebarsViewResolver in handlebars-springmvc/src/main/java/com/github/jknack/handlebars/springmvc/HandlebarsViewResolver.java then passes the attacker-controlled name to handlebars.compile(), allowing an unauthenticated remote attacker to read files accessible to the JVM when an application exposes a controller with a user-influenced view name. This issue is fixed in version 4.5.3. |
| 4MOSAn developed by 4MOSAn Security Technology Co., Ltd. has an Arbitrary File Read vulnerability. Unauthenticated remote attackers can exploit a Relative Path Traversal flaw to download arbitrary system files. |
| A path traversal vulnerability in LXD's instance template processing allows an attacker with container edit permissions, or any user launching a crafted image, to overwrite arbitrary files on the host system as root. When processing target template paths specified in metadata.yaml, LXD validates the path against a confined os.Root directory handle but subsequently opens and creates the file using os.Create with an unconfined string path. This discrepancy between path resolution checks and file creation allows an attacker to escape directory confinement, overwrite root-owned host files, and achieve host root code execution. |
| Path traversal in apport-unpack in Canonical Apport before 2.36.0, 2.34.2, and 2.28.4 on Linux allows an attacker to create or overwrite arbitrary files with the privileges of the executing user via an attacker controlled key names in crash report files. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: net: Fix fragmented datagram reassembly
fwnet_frag_new() keeps a sorted list of received fragments for a partial
datagram. When a new fragment is adjacent to an existing fragment, the
code checks whether the new fragment also closes the gap to the next or
previous list entry.
Those neighbor lookups currently assume that the current fragment always
has a real next or previous fragment. At a list edge, the next or
previous entry is the list head, not a struct fwnet_fragment_info.
The gap checks also compare against the old edge of the current fragment
instead of the edge after adding the new fragment. As a result, a
fragment that bridges two existing ranges may leave two adjacent ranges
unmerged, so fwnet_pd_is_complete() can miss a complete datagram.
Check for the list head before looking up the neighboring fragment, and
compare the neighbor against the new fragment's far edge when deciding
whether to merge all three ranges.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| Relative path traversal in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. |
| Relative path traversal in Microsoft Office SharePoint allows an authorized attacker to disclose information over a network. |
| Relative path traversal in Microsoft PowerShell Core allows an unauthorized attacker to execute code over a network. |
| Relative path traversal in .NET Framework allows an unauthorized attacker to elevate privileges locally. |
| When safe filter is used with variable expansion, all following pipelines on the same string are incorrectly interpreted as safe too, enabling unsafe data to be unescaped. This can enable SQL / LDAP injection attacks when used in authentication. Avoid using safe filter until on fixed version. No publicly available exploits are known. |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `AgentRuntime` promises scoped file access under a configured sandbox `basePath`, but its path containment checks use raw string prefix tests. A sandbox base such as `/tmp/network-ai-sandbox` also matches a sibling path such as `/tmp/network-ai-sandbox_evil/secret.txt`. An agent/user that can call `AgentRuntime.readFile()` or `AgentRuntime.listDir()` can read or list files outside the intended sandbox when the target path is in a sibling directory sharing the base path prefix. This breaks the documented sandbox boundary. The issue is fixed in v5.12.2. `SandboxPolicy.resolvePath()` and `isPathAllowed()` now use separator-anchored prefix checks (`resolved === base || resolved.startsWith(base + path.sep)`) for both the allow-list and block-list. A sibling directory that merely shares a name prefix (e.g. `/srv/app-evil` vs base `/srv/app`) is no longer treated as in-scope. |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.restore(env, backupId)` computes the backup path with `join(envDir, '.backups', backupId)` and only checks that this path exists. It does not resolve the result or verify that it remains under `data/<env>/.backups`. A caller can pass a traversal backup ID such as `../../../outside/source-dir` to restore files from an arbitrary directory into the target environment data directory. The issue is fixed in v5.12.2. `restore()` now validates `backupId` against `/^[\w\-]+$/` and asserts `dirname(resolve(join(backupsDir, backupId))) === resolve(backupsDir)` before touching the filesystem. Backup IDs containing path separators or `..` are rejected, so a crafted ID can no longer copy directories from outside `.backups/` into the environment. |
| Path traversal in Zoom VDI Client and Plugins may allow an authenticated user to conduct information disclosure via local access. |
| The Formidable Digital Signatures plugin for WordPress is vulnerable to file deletion due to insufficient file path validation in the delete_file function in all versions up to, and including, 3.0.6. This makes it possible for unauthenticated attackers to delete files on the server by supplying an attacker-controlled filename in the item_meta[field_id][content] parameter alongside the delete_saved_image flag during the standard entry-creation POST flow on any form that accepts anonymous submissions. |
| Path traversal in Ivanti Xtraction before version 2026.2.1 allows a remote authenticated attacker to read arbitrary files outside the web root. |
| A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an unexpected reload of the device.
This vulnerability is due to insufficient input validation of SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device using IPv4 or IPv6. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects all versions of SNMP (versions 1, 2c, and 3) and requires a valid SNMP community string or valid SNMPv3 user credentials. |
| Zohocorp ManageEngine M365 Manager Plus and M365 Security Plus versions below 4820 are affected to Authenticated Path Traversal vulnerability in Exchange Online backup module. |
