| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| libsmb2 before 6.3 contains integer overflow vulnerabilities in the DCE/RPC NDR decoder in lib/dcerpc.c that allow heap out-of-bounds reads and writes. A malicious SMB server or machine-in-the-middle on unsigned connections can send crafted NetrShareEnum replies with wrapping actual_count or max_count values when clients call smb2_share_enum_async(), corrupting heap memory. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, raw_to_int in upnp/src/genlib/net/http/httpparser.c parses Content-Length with strtol and casts the resulting long to a 32-bit int before the caller stores it as unsigned int. On LP64 systems, values greater than INT_MAX can truncate or wrap, so the HTTP parser can accept a body length different from the declared value. A remote adjacent-network peer can use the resulting parser disagreement to leave bytes to be interpreted as another request in persistent or proxied contexts, or can make a worker wait for an extremely large body and cause denial of service. This issue is fixed in 2.0.2. |
| phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of data blocks and interprets attacker-controlled file content as the next TAR header, which lets a crafted archive inject entries that PharData reports and extracts as if they were genuine. |
| A flaw was found in spice-server. The GLZ encoder dictionary restore path truncates a size_t allocation size to int when calling the malloc callback, allowing a malicious authenticated SPICE client during VM live migration to trigger a massive heap buffer overflow by sending a crafted max_encoders value in migration data. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| A 32-bit integer wraparound in the MongoDB C Driver's Windows-only Kerberos/SSPI authentication code can cause an undersized heap buffer to be allocated when an excessively long credential value is supplied in the client's connection configuration. A party able to control that client-side configuration, in conjunction with the affected authentication mechanism, can cause the driver to write outside the bounds of the allocated buffer. This may result in corruption of client process memory and denial of service of the client application. The issue affects only client builds compiled with the Windows-native authentication backend. |
| Integer overflow in OpenModSim (<=1.11.0), leading to denial of service |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because unchecked startOffset plus length arithmetic bypasses the range check and stores a wrapped m_endOffset that is inconsistent with m_byteOffset. When an existing source file is larger than a valid startOffset and a SendPartial command supplies a length whose U32 sum with that offset wraps below the file size, under standard F Prime assertion handling, the first data-packet transition reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FileUplink handleDataPacket offset and size validation is vulnerable because the component checks byteOffset plus dataSize with wrapping U32 arithmetic and then seeks to the large attacker-controlled offset before writing. When a file-uplink DATA packet supplies a byteOffset and dataSize whose unsigned sum wraps below the declared file size, data can be written beyond the declared upload size, causing file integrity loss and potentially large sparse-file growth or resource exhaustion. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because the wrapping sum bypasses file-range validation, becomes m_endOffset, and leaves m_byteOffset greater than the wrapped end offset. When an existing source file is larger than the supplied startOffset and a caller able to issue SendPartial supplies a length whose U32 sum with that offset wraps, the first data-packet send reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| Integer overflow or wraparound in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to elevate privileges locally. |
| Wasmtime before 36.0.16, 37.0.0 before 48.0.3, and 49.0.0 before 49.0.1 contains a denial of service vulnerability in wasmtime-wasi that allows guest WASI programs to panic the host via overflowing filesystem timestamps. Attackers can pass atim or mtim values whose sub-second field overflows the seconds field to path_filestat_set_times, fd_filestat_set_times, set-times, or set-times-at, crashing the host. |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In Eclipse OpenJ9 versions prior to 0.63.0, the JITServer component is vulnerable to a pre-authentication remote denial of service. When processing the initial 4-byte length field of an incoming TCP connection, an integer overflow in `MessageBuffer::computeRequiredCapacity()` causes the receiving compilation worker thread to enter an infinite loop consuming ~100% CPU. An unauthenticated remote attacker can exploit this by opening a small number of crafted TCP connections to exhaust the entire worker thread pool, silently halting compilation services for all connected client JVMs. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
