| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jython before 2.7.1rc1 allows attackers to execute arbitrary code via a crafted serialized PyFunction object. |
| Crypto++ (aka cryptopp and libcrypto++) 5.6.4 contained a bug in its ASN.1 BER decoding routine. The library will allocate a memory block based on the length field of the ASN.1 object. If there is not enough content octets in the ASN.1 object, then the function will fail and the memory block will be zeroed even if its unused. There is a noticeable delay during the wipe for a large allocation. |
| The SimpleSAML_XML_Validator class constructor in SimpleSAMLphp before 1.14.11 might allow remote attackers to spoof signatures on SAML 1 responses or possibly cause a denial of service (memory consumption) by leveraging improper conversion of return values to boolean. |
| The route manager in FlightGear before 2016.4.4 allows remote attackers to write to arbitrary files via a crafted Nasal script. |
| The Linux kernel version 3.3-rc1 and later is affected by a vulnerability lies in the processing of incoming L2CAP commands - ConfigRequest, and ConfigResponse messages. This info leak is a result of uninitialized stack variables that may be returned to an attacker in their uninitialized state. By manipulating the code flows that precede the handling of these configuration messages, an attacker can also gain some control over which data will be held in the uninitialized stack variables. This can allow him to bypass KASLR, and stack canaries protection - as both pointers and stack canaries may be leaked in this manner. Combining this vulnerability (for example) with the previously disclosed RCE vulnerability in L2CAP configuration parsing (CVE-2017-1000251) may allow an attacker to exploit the RCE against kernels which were built with the above mitigations. These are the specifics of this vulnerability: In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). |
| Integer overflow bug in function minitiff_read_info() of optipng 0.7.6 allows an attacker to remotely execute code or cause denial of service. |
| glibc contains a vulnerability that allows specially crafted LD_LIBRARY_PATH values to manipulate the heap/stack, causing them to alias, potentially resulting in arbitrary code execution. Please note that additional hardening changes have been made to glibc to prevent manipulation of stack and heap memory but these issues are not directly exploitable, as such they have not been given a CVE. This affects glibc 2.25 and earlier. |
| The Linux Kernel 2.6.32 and later are affected by a denial of service, by flooding the diagnostic port 0x80 an exception can be triggered leading to a kernel panic. |
| The mq_notify function in the Linux kernel through 4.11.9 does not set the sock pointer to NULL upon entry into the retry logic. During a user-space close of a Netlink socket, it allows attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact. |
| An issue was discovered in ytnef before 1.9.2. There is a potential out-of-bounds access with fields of Size 0 in TNEFParse() in libytnef. |
| Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Integrity Group Temporal Key (IGTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker within radio range to replay frames from access points to clients. |
| Crash in libmysqlclient.so in Oracle MySQL before 5.6.21 and 5.7.x before 5.7.5 and MariaDB through 5.5.54, 10.0.x through 10.0.29, 10.1.x through 10.1.21, and 10.2.x through 10.2.3. |
| Vulnerability in the MySQL Server component of Oracle MySQL (subcomponent: Server: C API). Supported versions that are affected are 5.5.55 and earlier and 5.6.35 and earlier. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all MySQL Server accessible data. CVSS 3.0 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N). NOTE: the previous information is from the April 2017 CPU. Oracle has not commented on third-party claims that this issue allows man-in-the-middle attackers to hijack the authentication of users by leveraging incorrect ordering of security parameter verification in a client, aka, "The Riddle". |
| Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: Security). Supported versions that are affected are Java SE: 6u141, 7u131 and 8u121; Java SE Embedded: 8u121. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Java SE, Java SE Embedded accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.0 Base Score 3.1 (Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:N). |
| Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Networking). Supported versions that are affected are Java SE: 6u141, 7u131 and 8u121; Java SE Embedded: 8u121; JRockit: R28.3.13. Difficult to exploit vulnerability allows unauthenticated attacker with network access via SMTP to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Java SE, Java SE Embedded, JRockit accessible data. Note: Applies to client and server deployment of Java. This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected. |
| An issue was discovered in icoutils 0.31.1. A buffer overflow was observed in the "decode_ne_resource_id" function in the "restable.c" source file. This is happening because the "len" parameter for memcpy is not checked for size and thus becomes a negative integer in the process, resulting in a failed memcpy. This affects wrestool. |
| mod_auth_openidc is an OpenID Certified™ authentication and authorization module for the Apache 2.x HTTP server. Versions prior to 2.4.12.2 are vulnerable to Open Redirect. When providing a logout parameter to the redirect URI, the existing code in oidc_validate_redirect_url() does not properly check for URLs that start with /\t, leading to an open redirect. This issue has been patched in version 2.4.12.2. Users unable to upgrade can mitigate the issue by configuring mod_auth_openidc to only allow redirection when the destination matches a given regular expression with OIDCRedirectURLsAllowed. |
| An issue was discovered in the Linux kernel before 6.0.11. Missing validation of IEEE80211_P2P_ATTR_CHANNEL_LIST in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when parsing the operating channel attribute from Wi-Fi management frames. |
| An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet. |
